Used Cefla Dryer for sale (1,681)

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Hodpjx Eifksfx Achjnr Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW Hsdpov I Akvofx Achenr - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Hnodpfjlc Dv Ujx Achsr

Year of construction: 2026, condition: new, CORMAK Refrigerated Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for use in standard industrial compressed air installations. Hjdsmt Dcxopfx Achenr High efficiency — capacity of up to 7000 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 1.37 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 7000 l/min Power consumption 1.37 kW Supply voltage 230 V Dimensions (L × W × H) 1000 × 550 × 920 mm Weight 95 kg Refrigerant type and quantity R410a, 900 g

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, charger for scrubber dryer Hnodpfx Ajzrlydocher -Manufacturer: Gansow, charger for scrubber-dryer -Type: E 24/24 DIGI-CONTROL -Input voltage: 230 V 50 Hz -Power: 24 V / 24 A -Dimensions: 340/250/H225 mm -Weight: 12.1 kg

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Hodpfxozivkbo Achsnr Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: not inspected (used), Year of construction: 2005, Without battery Manufacturer: Fimap Hnedpshzrbnofx Acher

Condition: used, Year of construction: 2011, Manufacturer: BEGA Hjdpfjuk A Enex Achenr capacity: 21 m3/min

Year of construction: 2003, condition: good (used), Capacity: 350 m³/h Hnodpfx Acofl Ig Rehor

Condition: used, Year of construction: 1998, 1 unit multi-chamber desiccant air dryer, GERCO TTM4/50 Color: as shown in the images, corresponding to the images and inspection Year of manufacture: 1998 Condition: used Hnodjzqci Topfx Achor

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Hnodpfowg Sgcjx Achjr Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 2016, KAESER Energy-Saving Refrigerant Air Dryer, Model TB 26 SECOTEC Volume flow: 2.55 m³/min | Pressure dew point: 3 °C | Refrigerant: R-513A Volume flow (m³/min) 2.55 Pressure dew point (°C) 3 Pressure drop (bar) 0.20 Electrical power consumption at 100% volume flow (kW) 0.62 Hnjdpfx Acszrhizshor Electrical power consumption at 50% volume flow (kW) 0.34 Electrical power consumption at 10% volume flow (kW) 0.1 Min. overpressure (bar) 3 Max. overpressure (bar) 16 Min. ambient temperature (°C) 3 Max. ambient temperature (°C) 43 Max. inlet temperature, compressed air (°C) 55 Width (mm) 620 Depth (mm) 540 Height (mm) 963 Weight (kg) 116 Compressed air connection G 1 Condensate drain connection G 1/4" Electrical supply 230 V / 1 phase / 50 Hz Refrigerant R-513A Refrigerant charge (kg) 0.53 CO2 equivalent (t) 0.33 Global warming potential (GWP) 631 Energy-saving control Refrigerant storage Location: available from warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Hodsuql Rtepfx Achonr Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Hnsdpou Afz Refx Achor

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Hnsdpfjvmq Tisx Acher

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Hjdpfx Acetpct Njhonr

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Hodpfx Aew I E Dpechjnr

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Hjdpfsy E S E Njx Achenr

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Hnedpfx Acsy E S E Ajhjr

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Hnsdpfjydp Abjx Achsr

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- Hsdpfx Ajvq I Tnochjnr BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Year of construction: 2010, condition: used, The belt dryer is ready for use; a video can be sent via WhatsApp. The dryer is no longer needed. It includes the feed screw, the blower unit, and the discharge screw, meaning it is complete. Hjdpfxsztwhve Achsnr

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, FOR SALE – Drucktech KIH 70-200 quartz-tube infrared tunnel dryer (heat tunnel) I am offering for sale my Drucktech KIH 70-200 quartz-tube infrared heat tunnel, which is no longer in use. Heated tunnel width 70cm, length 200cm, overall machine length 350cm. Hedpfozrgniex Achonr You can find more information about the new unit by searching for the machine name online. List price: EUR 3280 + VAT The most recent price I am aware of (2022–2024) was HUF 3,200,000 + VAT, approximately EUR 8800 + VAT. Please send inquiries via message. Viewing is possible in District IX, Budapest (Hungary), by prior appointment.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. Hodpfjrftxfsx Achjnr The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug. Hodezdcdrspfx Achjnr