Dryer

Cremona

Year of construction: 1999, condition: ready for operation (used), Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible. Podpfx Aksw I E D Asfogk

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Pgedowp Rqfspfx Akfek • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 1999, condition: ready for operation (used), A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible. Pedpfx Aow I E D Nokfogk

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Pgsdpsw I E Dvjfx Akfsk

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. Pgsdetu T I Ujpfx Akfek All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% Psdpfx Akovndvysfjgk final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings Pedpfx Aksvm An Eofjgk 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: Pjdpeftdv Uefx Akfogk silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 2,050 mm, input frequency: 50 Hz, Complete decoiling line including: - 3-strand infeed dock - A. CREMONA type CE12 year 1995 - A. CREMONA type SFH 2050x1200 year 1995. - Intermediate conveyor with cell detection of open defects. - A. CREMONA ROTAX 2100 year 1995. - Transport and separation conveyor to stacker. Pedpfxjul S D Ns Akfsgk - Waste return conveyor. - A. CREMONA vacuum stacker. CREMONA 4 stations, with lifting tables. - Total length 37m (excluding infeed platform). -Total installed power: 360 kW - 400V-50 Hz

Condition: good (used), Year of construction: 1980, functionality: fully functional, Complete peeling line for exotic woods consisting of : HAWA crosscut saw + debarker 2-strand infeed dock. Podpfeul Tc Tox Akfjgk Automatic centering machine year 2018. A. CREMONA SF 3300x2020 3-storey Müller coil store. 2 OLM ESTA 2000 and 3300 veneer stacker extractors. Boiler SUGIMAT SH40-2500-2T 2,9 MW year 2011.2 VECOPLAN VTH 800/2T mill Functional unit

Condition: new, Year of construction: 2025, Working width 300 mm Working length 1100 mm Brush diameter 190 mm Brush rotation speed 1500 rpm Spindle diameter 40 mm Number of brushes 2 pcs.(metal + plastic) Psdpfxjgykaue Akfjgk Max. speed of the feeding belt + smooth adjustment 0 - 10 m / min. Working height 940 mm + 50 mm Max. material height 300 mm The diameter of the extraction port 2 x 120 mm Overall dimensions Length 1240 mm Height min / max 1350/1650 mm Width 950 mm Weight 435 kg Total power 4.65 kW Voltage 400V Massive casing, as a result, ensures high stability Working height 940 mm + 50 mm and max. 300 mm material height gives you the freedom to process large materials Two independent brushes (steel, plaster) with powerful motors, with precise manual adjustment allow you to achieve high product quality Two independent extractors ensure smoothness of the removed sawdust and dirt The machine is made of high-class materials, which guarantees reliability high-quality workpieces Stepless speed control of the conveyor carpet allows you to achieve smoothness and intended productivity Optimat's many years of production experience allows us to meet the highest standards machine tool for every budget