Used Davi Mcb 2020 for sale (1,988)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,125 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,610 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,500 kg, total length: 2,044 mm, drive type: Elektro, construction width: 1,152 mm, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Bjdpszu Dr Dsfx Abtsdg Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 420Ah Battery year of manufacture: 2020 Description: Thorough equipment cleaning, orange paint refresh, new black superelastic tires, new front rims, new roof cover, new auxiliary hydraulic hoses Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, impulse control, full free lift, CE certificate, safety light, safety pilot

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 3871, functionality: fully functional, K 36 edge banding machine with Airtronic hot air unit The machine is equipped with an Airtronic unit, designed to create seamless joints using edge bands with a thermally activated functional layer. During the edge banding process, compressed air is heated to a temperature of approximately 300–600°C and directed through a nozzle directly onto the functional layer of the edge band, immediately before the pressing zone. Under the influence of the temperature, the layer is activated, and then the edge band is pressed onto the narrow surface of the panel. This technology allows for a virtually seamless joint with no visible adhesive seam, referred to as a zero-gap joint. This solution works particularly well for processing acrylic fronts, high-gloss surfaces, super-matte surfaces, and other components where high optical quality of the edge band-to-panel joint is essential. In terms of the visual effect achieved, the Airtronic technology is an alternative to laser systems, without the need for a laser unit. An important advantage of the machine configuration is the ability to operate using several edge banding technologies. In addition to the Airtronic system, the edge banding machine can also operate in a conventional manner, using hot melt EVA and PUR adhesives. This allows the technology to be adapted to the type of edge band, panel material, and requirements regarding the quality and durability of the finished component. Technical data of the machine Type: K 36 Bdodpszx Dutofx Abtsg Machine number: 3871 Year of manufacture: 2020 Power supply: 400 V / 50 Hz Rated current: 28.9 A Installed power: 14.6 kW Counter reading: 11,561 operating hours Total length of edge band processed: 852,054 m

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, 0602700 Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Bodpozx Rmvjfx Abtedg Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, 0603100 Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-axis robot, manufacturer

Condition: used, functionality: fully functional, mileage: 4,79,772 km, first registration: 07/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: retarder, VOLVO FH500 TRACTOR UNIT Bjdpfx Ajzx Rpwsbtjdg YEAR 2020 MILEAGE 479,772 KM AUTOMATIC TRANSMISSION + RETARDER WHEELBASE 3700 MM FRONT TIRES 385/55 R 22.5 - REAR TIRES 315/70 R 22.5 DISC BRAKES FRONT SUSPENSION: LEAF SPRINGS, REAR SUSPENSION: AIR SUSPENSION CABIN WITH REFRIGERATOR AND ROOF HATCH DUAL FUEL TANKS PRICE: 53,000.00 + VAT

Condition: used, functionality: fully functional, Cormidi KB 23 tracked aerial platform Bjdpfx Aozx E N Eobtodg Year: 2020 Petrol engine + electric power supply Electronically controlled stabilizers Hydraulic platform levelling with electric control Maximum working height: 22.30 m Maximum working outreach: 11.75 m Maximum working area reach: 20.30 m Under-bridge work capability: up to -5 m Provision for crane and winch Good overall condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Bdedpfxozx Rvdo Abtjg Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Year of construction: 2018, condition: good (used), Permanent overband magnetic separator TYPE PEM2000 2000 x 1000 x 400mm Bdjdod Dy Szopfx Abtsg ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1000x500mm

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder Bdodpfx Absq A S Ekstsg 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: ready for operation (used), Fanuc A16B-2202-0492 / 02A circuit board, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdjdpelcf Ruofx Abteg

Condition: ready for operation (used), Fanuc A16B-2202-077 circuit board, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bsdpfslcf Rxsx Abtedg

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Bjdpfsvvk T Isx Abtodg Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Siemens 1FT5064-0AK71-1 - Z AC-VSA motor SN:YFM813008202003, Z= K31: 2nd plate is loose in the terminal box, K93: Housing IP67, Q01, the motor was overhauled at Siemens, used, in good condition, 100% functional, scope of delivery as per photos Bdedpfx Abeugcikjtjg

Condition: used, mileage: 60,263 km, power: 316 kW (429.64 HP), first registration: 05/2022, fuel type: diesel, empty load weight: 12,790 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65 R22,5, rear tire size: 315/80 R22,5, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, onboard computer, truck registration, | MAN TGS 26.430 6x4 tipper | HMF 2020K-RC 4-way extension | Lane departure warning, emergency braking assistant, adaptive cruise control, | Leaf-leaf suspension, additional headlights, | Manual transmission, EURO6 | Trailer coupling, radio/CD, ABS | Differential lock, | Dead weight 12790 kg Total weight: 26000kg | Radio remote control | Roll-up tarpaulin, lashing eyes on loading area, | Dimensions loading area: 6.15m length, 2.50m width Side wall height: 0.80m | Errors, input and advance sales excepted. Bjdpfxjxaqdqo Abtsdg

Year of construction: 2010, condition: used, Roll lenght 280 mm roll diameter 70 mm Weight 10 kg 1 pair of used edge guide, type KF 2020 pnuem. design left + right The price refers to 1 pair each. Bdjdpfjw Tdu Dsx Abtjg

Condition: ready for operation (used), Beckhoff CX2020-0120 CPU basic module SN:17924, used, minor signs of wear, 100% functional, scope of delivery as per photos Bdsdpfx Aerv Nz Usbtsg

Condition: good (used), Manufacturer: Mercedes Type: 1017 F (L F 16 TS) fire engine Year of construction: 1983 Mileage: 96262 km Next HU 2020 Engine type: F 3 L 912, diesel, 124 kW Bjdpfx Ajt H Rrhjbtjdg Attachments: Bachert 16 / 8 front-mounted pump Unladen weight: 6750 kg Payload: 5250 kg Length: 7600 mm Width: 2500 mm Height: 3100 mm Cubic capacity: 5638 cm3 Checkbook-maintained until 2019 with HU

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Bdodpfx Aeurf I Uobtjg Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 7,900 Euro + VAT, negotiable, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 9,769 h, load capacity: 2,000 kg, lifting height: 6,130 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork length: 1,150 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Battery capacity: 625Ah Battery year: 2018 Description: Sideshift, 3rd valve, front work lights, overhead guard, full free lift, CE certificate, safety light. Bsdpfxjyauw Ns Abtedg

Condition: used, Year of construction: 2018, Overview  This semi-automatic 20 hL brewing system was manufactured in 2018 and is equipped with a steam-powered heating system. It includes a complete brewhouse, a steam generator, a CIP station, fermentation tanks and a KEG cleaning system. Bdedevy U Dropfx Abteg Technical details  - Wort yield: 20 hL per brew - Control: Semi-automatic - Heating: Steam Scope of delivery  - Steam generator | Certuss | Junior TC-300 | 2018 - Capacity: 300 kg/h - Including water treatment plant - Brewhouse | SKRLJ DOO | BH-3 | 2018 - Mash & lauter tun - Kettle - Whirlpool - Hot water tank | 4.586 L | steam heated jacket - Cold water tank | 4.400 L | glycol cooled jacket - 2 stage heat exchanger - Grist bin 500kg - Semi-automatic CIP station | SKRLJ DOO | CIP 2x500L | 2018 - 500 Litre Acid tank - 500 Litre Caustic tank insulated, electric heating - 1x sanitary centrifugal pump - PLC for pump/temperature control - Full stainless steel construction - Keg washer | SIFA | Idrokeg 21 | 2020 - 12 KEGs/ h - 2 cleaning stations - Semit-automatic - Steam heated - 2x S-Type heads - Malt mill | Robix | RX-600 | 2018 - Capacity: 600 kg/h  

Condition: new, Siemens 1FT7066-5AF71-1CG1 synchronous motor SN:YFE6610254202010, unused in original packaging, 100% functional, scope of delivery as per photos Bodpfx Asx Du A Eobtedg

Condition: new, Siemens 1FT7066-5AF71-1CG1 synchronous motor SN:YFE6610254202023, unused in original packaging, 100% functional, delivery as per photos Bodpjx Du Dcsfx Abtjdg

Condition: new, Siemens 1FT7066-5AF71-1CG1 synchronous motor, serial no.: YFE6610254202027, unused in original packaging, 100% functional, scope of delivery as per photos. Bdsdpex Du Dvjfx Abteg

Condition: excellent (used), color: black, lifting height: 23,500 mm, Year of construction: 2020, operating hours: 93 h, Drive: Wheel Empty weight: 2.500 kg Lifting capacity: 800 kg Dimensions of cargo space: 782 x 204 x 232 cm Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bjdpjxzdv Aefx Abtjdg Klaas K17/24 * 2020 * Petrol drive * 93 working hours * 23.5 meter hook height * 18 meter horizontal reach * 800 kg lifting capacity * Remote control * Equipped with work lights * Wheel drive * Prepared for a man basket * Includes documentation

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,816 h, load capacity: 2,000 kg, lifting height: 4,200 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,612 kg, total length: 2,120 mm, drive type: Elektro, construction width: 1,160 mm, Electric 4-Wheel Forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50-10 non-marking Bjdpfx Abewb Ip Netsdg Rear tires type: Superelastic Rear tires size: 16x6-8 non-marking Battery voltage: 48V Battery Ah: 625Ah Description: In addition to this Still model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this RX20-20P. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Sideshift, Heating, full cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,586 h, load capacity: 2,000 kg, lifting height: 5,065 mm, free lift: 1,705 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Bedpfx Abeyfx N Hjtodg Technical condition: very good Front tyre type: Non-marking Front tyre size: 200/50-10 Rear tyre type: Non-marking Rear tyre size: 16x6-8 Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Still Battery year: 2018 Description: incl. charger Sideshift, 3rd valve, rear work light, front work light, heater, full cabin, full free lift, safety light, multiple lever control, single pedal