Used Optiflex B for sale (39,059)

Condition: good (used), Year of construction: 2012, CNC lathe TAKANG TNC-N200DS-B Control: Fanuc 0i-TD Configuration: Twin spindle, inclined bed, 12-station servo turret Swing over bed: Ø 650 mm Max. machining diameter: Ø 490 mm Max. machining length: 510 mm Main spindle nose: A2-6 Prjdpfj Agcrgsx Airjc Main spindle bore: Ø 61 mm Main spindle bar capacity: Ø 51 mm Main spindle bearing (ID): Ø 100 mm Main spindle hydraulic chuck: 8″ Main spindle speed range: 42 – 4,200 rpm Sub spindle nose: A2-5 Sub spindle bore: Ø 56 mm Sub spindle bar capacity: Ø 45 mm Sub spindle hydraulic chuck: 6″ Sub spindle speed range: 60 – 6,000 rpm Sub spindle stroke (E axis): 500 mm Turret: 12 stations, servo X-axis travel: 280 mm Z-axis travel: 560 mm Rapid traverse X / Z: 20 m/min Tool change time: 0.2 sec Tool holder: □ 20 mm Max. boring bar: Ø 32 mm Main spindle motor: Fanuc 18iP, 9 / 11 kW Sub spindle motor: Fanuc 6i, 5.5 / 7.5 kW Hydraulic pump / tank: 1.5 kW / 60 l Coolant pump / tank: 750 W / 100 l Machine weight: 7,030 kg Year of manufacture: 2012 (July) Manufacturer: CNC-Takang, Taiwan For more information, please contact us.

Condition: good (used), Year of construction: 2014, Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1 Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,500 kg Dimensions according to documentation: approx. 3,741 x 1,718 mm and height approx. 2,800 mm (including operating light, which can be unscrewed). For carton dimensions: 600 x 400 x 400 mm (can be changed with a different tool). 400V, 8kW, 15A, 3 phases Condition: good Pjdpfx Aiozbyn Njrorc Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Curtain ironing table with preheated rotating surface and steam extraction The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Prodpfx As Abar Roirsc Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-240-75-5616, functionality: fully functional, Equipment: CE marking, documentation/manual, SAWTEQ B-300 panel saw Cutting length: 3800 mm Cutting width: 3800 mm In very good condition, selling due to replacement with a different model. Pjdpfx Aioz Tt Eisrjrc

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Prsdpfx Ais Ad Ur Reroc Wheel diameter: 1300 mm Wheel width: 170 mm Log carriage length: 4300 mm Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: used, Year of construction: 2009, machine/vehicle number: 19727, with CNC control, manufactured by HEIDENHAIN, type: ITNC 530, travel ranges: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with automatic tool changer with 30 tool positions, with coolant system, chip conveyor, manufactured by KNOLL, type: 340 K-1, machine weight: 7000 kg. Pedpfx As Af Nlxsirerc

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 >> 3-jaw chuck 200 mm, 1 set of jaws >> Mulifix size B with 2 steel holders >> Drill chuck Podpj Agnrgsfx Airjrc >> Bed stop >> Machine feet About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: used Available from December 2026 Prode Advfropfx Airec Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - Y-axis on slides 1 and 2 - Chip conveyor - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Prsdpfx Asz Rlkxsirjc Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Film and paper cutting machine Material web width: 380 mm Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding shaft diameter: 76 mm Psdpsz Ag Nbefx Airjrc Machine will be factory-inspected, 3 months warranty.

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Prjdpfx Aio Aa Im Tjrsc Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Prjdpfx Aiez A Ah Rsrec Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Psdpoz Tdcfofx Airjrc

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed Predpfju Udd Sjx Airsc 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Psdjz Ryhxspfx Airjrc Stored in a covered, enclosed warehouse.

Condition: excellent (used), Year of construction: 2019, Panel dividing saw HOMAG SAWTEQ B-200 / HPP 200/38/32, manufactured in 2019. Cutting length 3,800 mm; saw blade overhang 65 mm; scoring saw; intelliGuide Basic; three air cushion tables; label printer. Collection possible from December 15th. Earlier collection is only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport will be arranged. Predpfx Ais Adubfjrsc Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 Psdsz Tacnspfx Airorc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Podpfx Aozak Htjirjrc

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: Prsdjz Szcyspfx Airsc • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Condition: good (used), Year of construction: 1998, functionality: fully functional, magnetic sign, 170x450mm Prsdpfx Aiszicflersc Clean and well-maintained, with a paper filter.

Condition: used, mileage: 90,000 km, power: 88 kW (119.65 HP), first registration: 05/2016, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system: Radio CD 18 BT (Radio/CD, USB port, Bluetooth), spare wheel with road tyres, seat configuration: bench seat omitted Additional equipment: Driver's airbag, exterior mirrors electrically adjustable and heated, on-board computer, brake assist, tachometer, electronic differential lock, rear wing doors without windows (opening angle 180 degrees), body/construction: standard panel van, cab: standard cab, body length: L1, roof height: standard roof (H1), fuel tank: 80 litres, adjustable steering column (steering wheel), engine: 1.6 litre - 88 kW biturbo CDTI, radio remote control on steering wheel, wheelbase: 3,098 mm, low-emission according to Euro 5 emissions standard, steel wheels 6.5x16, start/stop system, variable load securing rails (FlexFix system), heat-insulating glazing, permissible total weight 2.7 t Vehicle shows signs of wear visually, technically in very good condition! Prodpfxo Agf Aro Airsc Financing available

Year of construction: 1978, condition: used, Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible. Prodpfe Adt H Tex Airoc

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Sold complete With documentation With chip conveyor Prsdpfxoypb Nks Airec

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, Pjdpjxqyg Nofx Airsrc 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: good (used), Year of construction: 1989, turning height: 1,275 mm, workpiece weight (max.): 16,000 kg, turning diameter: 1,900 mm, faceplate diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 27,000 kg, Max turning diameter 1900/1800 mm (facing/peripheral) Psdpo Ad Hy Tefx Airjrc