Used Die-Sinking Edm Machine Zimmer&Kreim for sale (67,577)

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example. Knedpfx Akozhnrusloa

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Knjdpfx Aksza E Rmjlja

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Kjdpfsuyk Rlox Aklsna

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Knedpfjxwyv Rox Aklea

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Kjdpfxjuqacke Aklona

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Knedpfxezk Nb Aj Aklea

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Ksdpfjy N Uwiex Aklena

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Kjdjvb Hbrspfx Akljna

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Kjdjw Sxx Iepfx Akljna

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Kodpfoy R Dtcsx Aklona

Year of construction: 2005, condition: ready for operation (used), A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible. Ksdpfx Aszi Ei Hokljna

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Knjdpfjzukrdex Akloa

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Kodpfxszpypzj Akljna Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available Knjdpfehmmfksx Aklea - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition Kjdpfx Akjxpqy Delena

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot Ksdpoya Iaqjfx Aklona - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Kjdpfx Akjziytmelsna Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards Kjdpfxewvidqs Akljna - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency - High-durability polymer-coated upper roller - Optional table extensions available - Custom machines and tooling on request CE/UL certified – compliant with industrial standards

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Knjdpfsx Hgg Dsx Aklsa

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Knjdpfxsm Uyuxs Aklsa Water bath incl. cooler Automatic wire threading

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm incl. chiller Kjdpfxjx Hghuo Aklona Automatic wire threading Water bath

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Knsdpeuu Dl Rofx Aklja Automatic wire threader

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Knjdpfew Swd Aox Akloa

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Kedpjzr D Dnsfx Aklsna

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Kjdpfx Aksznttdelona Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.