Used Emag Vl5I F for sale (33,756)

Condition: used, Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 Kjdpfx Apjc Skuaodjdn -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg

Condition: used, Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW Kdedpsc Sxqkefx Apdon -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg Kodpfx Aoc Uz Huepdjdn

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Kdsdpfxsxzqghj Apden -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP2 -Transport dimensions: 500/90/H120 mm -Weight: 0.8 kg

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane Kdedpfx Apsw N Sdledon -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-MPower: 0.13/0.50 kW -Speed: 43.4/186.8 rpm -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Kdjdpfxjxzqnxj Apdsn -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP1 -Transport dimensions: 520/26/H145 mm -Weight: 1.7 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Kdjdpfxexzq Tho Apdjn -Type: 6x Option key, 2-stage -Connector: 16-pin -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos Ksdpfx Apjtpkv Aedsdn -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane Kjdpfx Apow N Ryxododn -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Year of construction: 1991, condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PKV1-V1-F4 -Load capacity: 125/250 kg -Main lift: 8/4 m/min -Fine stroke: 2/1 m/min -Number: 2x chain hoist available -Price per piece Kdjdpfx Aek Nfnqspdon -Dimensions: 230/200/H235 mm -Weight: 15 kg/pc.

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). Kjdpjyvvbcofx Apdedn 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). Kdsdpfx Apeyvuaksdsn TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: good (used), Vacuum filling, metal detection and clipping line Kdsdpfsw Hluysx Apdon

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock! Kedpfx Asv Uvvfjpdodn

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. Kedpfoyu S Aljx Apdodn 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Kdjdpfx Ajyuy S Uopdsn Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Type: PM V8 V1 F6 Year of manufacture: 1992 Kedpexcnmnsfx Apdjdn Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH Kdjdpfxsyut Aaj Apdon 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 2. Demag control box / switch cabinet for DH hoist

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TH2000MessraumRES, DEMAG KBK Crane System Overhead Crane Runway 9.3 x 5.3 m (Bridge travelling path approx. 5 m) The crane is also available in various other dimensions, multiple units in stock with elevated carriages. Load capacity / Lifting capacity: 500 KG Technical data of the system: Crane runway made from Demag KBK2 profiles with elevated carriage – crane girder is located between both running rails for maximum lifting height Kdsdjv Iai Nopfx Apdon with internal power supply !! System is delivered complete: KBK profiles, profile connectors, carriages, end plates, drag chain (internal conductor rail system optional!) brackets/suspension elements etc. including Demag DK chain hoist, capacity 500 KG Crane is dismantled and immediately available Various cranes in stock Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by prior arrangement only Demag KBK1, KBK2 and KBK3 profiles in stock! Other KBK systems with different capacities also available. Load capacities from 125 KG to 1600 KG Please request your required crane runway with load capacity and dimensions without obligation.

Condition: ready for operation (used), functionality: fully functional, The VEMAG FM-250 former is designed to deliver precise and consistent shaping of food products in industrial environments. It enables standardized portioning while maintaining consistently high quality, improving the uniformity and yield of production. Additionally, VEMAG technology ensures high reliability on automated processing lines. This model operates with a power rating of 2.5 kW and supports a power supply between 400 and 460 V in three-phase. Its 6 A current draw allows for straightforward integration into existing setups. The compact design also facilitates installation directly at the outlet of a filling machine, making it easy to include in a continuous production process. Weighing 340 kg, the FR-250 provides excellent stability during operation, ensuring precise forming even at high speeds. The robust German industrial construction guarantees durability and longevity, making the equipment suitable for demanding food processing environments. Offered by Europ’Équipement, this VEMAG FM-250 former is identified by its manufacturer's plate and inspected prior to being put into service. Buyers therefore benefit from reliable, ready-to-use equipment. Furthermore, purchasing pre-owned allows you to lower your investment while retaining industrial-grade performance. Technical specifications: Manufacturer: VEMAG Maschinenbau GmbH Model: FM 250 Year: 2013 Serial number: 2500431 Power: 2.5 kW Power supply: 400–460 V Frequency: 50/60 Hz – three-phase Current: 6 A Weight: 340 kg SCCR: 5 kA Kedpfx Apsyu Rypodedn

Condition: excellent (used), functionality: fully functional, 2 DEMAG trolleys PLV84 NF Very good condition, complete with DEMAG DST control pendant For example, for parallel operation on a crane girder (steel trade, long parts) Kodpfx Apev Uvp Eodsdn Lifting capacity per hoist: 1.6 tons Reeving: 4/1 Considerably below manufacturer's new price Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse Also check out my other offers

Condition: used, with 7 spindles used Machine inspected, test run performed Adjustments checked, lubricated Kdsdpfx Ajwrtldjpdjn Manufacturer: Hemag Type: Milling Rotor 190 Machine No.: 703134 Motor: 7.5 kW Mechanical brake 3 speed stages Forward and reverse operation Spindle: 7 units Spindle diameter: 30 mm Max. tool diameter with fence: 210 mm Max. tool diameter in machine: 140 mm Table size: 1300 mm x 1050 mm Extendable frame support Milling fence with fine adjustment Extraction connection D 120 mm Required space approx. 1300 mm x 1100 mm x 1200 mm Weight approx. 1100 kg Total connected load: 7.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty.

Condition: new, functionality: fully functional, machine/vehicle number: Nadelverschlussdüse ( Federbetätigt ), Needle shut-off nozzle (spring-operated) Thread M60x3 Ref. G70 1198 / 392/199 Kjdpsv Ancgsfx Apdodn Condition New

Condition: used, Several available partly only rotor and housing or also with motor from 20tsd Kdjdpfx Aenxlaxjpdsn

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Kodpfx Apow A R H Tsdodn Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Complete with RSP.