Used Flange For Faceplate for sale (5,233)

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Handover in its current condition as inspected -Mouth size: Ø 500 mm -one threaded insert is missing -all 4 cheeks are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Bolt circle: Ø 132 mm Psdpjctla Iefx Alwsgt -Weight: 45 kg

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Pjdpfx Aljzfi Hhjwegt Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING Pgedpfsx Dfmhsx Alwot FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Manual centralized auto-lubrication Control panel placed on the body Hydraulic (air) oil cooler Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Podoyv Uuzjpfx Alwsgt Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Podpfx Alewkdt Newogt The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: ready for operation (used), * Model: rolls for rollertables * Rolls with size: 500mm x 89mm Pedpfxoywmfho Alwegt * Type: SW 14 * Price : €11 a piece * Stock: 2200 pieces.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 48000 € 916.8 € 6 mm 4 mm 70 mm 4000 mm 550 mm 8.75 kW 4250 mm 720 mm 2000 mm 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. Pgsdpfx Alsyq Spwswst One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker Psdpfx Aljymbfyswogt 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: excellent (used), color: other, Year of construction: 2005, Last haak Rotator Snelwisselsysteem = More information = Dimensions (LxW): 104 x 48 cm Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Psdpfxeymqmto Alwjgt Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. 1 unit with through-hole = 128 mm 1 unit with through-hole = 90 mm Psdpfezg Tf Dex Alwogt 1 unit with through-hole = 80 mm.

Condition: used, This listing is for a second-hand Konica Minolta accessory: ‘Konica Minolta IQ-501’ Compatible with various Konica Minolta AccurioPress models (code WY1) Condition: Pgedpfx Aoy R Nvcolwot This is a second-hand item, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sturdy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, faceplate diameter 2500 mm Thickness 240 mm Podpfsyuqiqox Alwogt T-slot - distance 175 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Optional with 4 jaws €3750 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position Pgedpfxoyt Nvgj Alwjt -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Machine length: 3880 mm Weight: 1530 kg

Condition: used, faceplate diameter 800 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Pgedpfxsyx Ipwe Alwot We look forward to your visit. Your Markus Hirsch Team

Condition: used, faceplate diameter 1000 mm total power requirement . kW weight of the machine ca. 590 kg dimensions of the machine ca. . m 340 rpm Bolt circle: 330 mm Fit: 285 mm Jaw width: 55 mm Thickness: 170 mm Opening: 145 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Pedpfx Alozfqhgswsgt possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Pgodpjwf Hghjfx Alwst Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/8311, Offer Number: D08L/8311 Machinetype: straightening and cutting machine Make: HSH Type: for Stuts Pedpfxjwi Thyj Alwsgt Constr. year: 1990 diameter range: 3-10 mm cutting length: 10-130 mm Location: In our warehouse

Year of construction: 2014, condition: used, Year of manufacture: Mar 2014 Psdpfx Aov Rn N Ajlwsgt New: No Serial number: 1086683 complete tank for fridge unit taken from a schmitz cargobull good condition

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Psdpfx Alsxqcn Aswjgt Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW Pjdpfjw Ug Atsx Alwogt SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: used, Cutting head for Hegla Formline KT-19I Replacement cutting head, model cutting system. Little second-hand. SK. No.: 1611-10-138 Length: 225 mm. Pgjdpfov Rattox Alwst Width: 120 mm. Height: 320 mm. Weight: 9260 g.

Condition: excellent (used), functionality: fully functional, REF: MM6320 1 x Bertuetti conical rounder with automatic flour duster for pieces of dough. Conical rounders work by using a rotating cone and fixed rounding channels (or troughs) to shape the dough pieces into a smooth, round ball. This process helps create an optimal shape and structure for the final product. Manufacturer - Bertuetti. Speed - Variable. Pgjdpfx Aox I Sp Hjlwst Previously used for pieces of dough weighing between 80g-800g. Electrical requirements - 3 phase.

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Please contact Sales Team for more information Pgodoydmzzepfx Alwet

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Psdpfx Alsvk D Tdswjgt Sheet thickness max. 1.75 mm.

Condition: used, Cryogenic gas tank vessel used for Ethylene (ethene, C2H4). Export from EU Pgjdpjx Hykcjfx Alwet We have also other tanks for different gases please contact us for more details