Used Foba G 10 for sale (58,109)

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: Gkodpfx Asvmmrujkaob - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Year of construction: 2017, condition: used, Used machine Gkedszu T Smopfx Akaob Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, Gkedoznngxopfx Akajb * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Gjdpjzyafdofx Akaokb Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Gksdpfxjy H Ikqj Akaeb Errors / input mistakes excepted.

Year of construction: 2014, condition: excellent (used), For sale: our Asys Insignum 1000 Scan Asys Insignum 1000 Scan Serial number: 052441 Year of manufacture: 2014 Gedpozxgu Ajfx Akaekb In very good condition. Shipping possible.

Year of construction: 1996, condition: ready for operation (used), Load: 300-1500kg, weight: 1.43t, an inspection is possible. Gkedpfopcgyxex Akaeb

Condition: used, Year of construction: 1999, operating hours: 4,760 h, load capacity: 3,000 kg, lifting height: 10,000 mm, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * Samborn T30110 Telescopic forklift * Year of manufacture: 1999 Gjdpfjzwkndex Akaekb * Operating hours: 4,760 h * Quick coupler * 1 x load hook * 4x4x4 all-wheel drive / all-wheel steering * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Gkjdpoyrhd Tjfx Akasb If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: good (used), Year of construction: 2003, Wampfler GS 21-05/1812/04ML/LT Slip Ring Assemblies GS 21 Technical Details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of Manufacture: 2003 • Protection Class: IP54 • Design: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Application: Slip ring assemblies for the safe transmission of power and signals in rotating applications, including: • Crane systems • Lifting and conveyor technology • Wind turbines • Mechanical engineering Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Gkedpfoxl Avpox Akaob Find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: Gkjdpfjzw Dcnjx Akasb - Automatic door - Operating panel - Machine hood - Chip conveyor

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 1 x Yamato Dataweigh 14-head weigher with RCU-920 Remote Control Unit touch-screen control panel, top cone and collating funnel. Fitted with smooth weighing pans this weigher is ideal for free-flowing dried goods only. Gkjdpfx Aozydaxskaeb Model – ADW-E-1014S (Dataweigh Epsilon Series). Serial number - WG251076. Date of manufacture - 2022. Weighing range - 20g to 3000g. Maximum pack volume - 10 litres. Speed - up to 100 drops / minute. Electrical requirements - 200-240 V / 50-60 hz / 1 phase. Overall dimensions - 1600mm long x 1600mm wide x 1530mm high. Supplied with User Manual, Drawings (including electrical) and Parts Manual.

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Gedpfxey E Ixxj Akaokb Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Gkjdpfx Akjznbp Tjaeb Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Gkjdpfx Akstv Ivzoajb Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication Gksdozdu Uzjpfx Akajb - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder Gjdjy Ez Erepfx Akaekb The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Gksdpfsw R Tvxox Akaeb

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Gkodjzyuckopfx Akasb Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,597 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops) Gkjdpfxezvb E Ds Akasb

Condition: good (used), Year of construction: 2004, General information: • Manufacturer: Edale Ltd. (UK) • Model: Sigma • Year of Manufacture: 2004 • Condition: Very good, regularly serviced • Availability: Immediately Technical Specifications: • Printing units: 8 x UV flexo o Configurable as 8 front-side or 4 front + 4 reverse • Die cutting units: 2 • Web Width: 510mm • Conversion Options: Roll-to-roll and roll-to-sheet • Turn bars: 2 (for front/back printing) • Register Control: Included • Drying System: UV curing on all units • Inspection: Camera-ready setup possible • Applications: Labels, films, flexible packaging, paper and carton • Included Accessories: Magnetic cylinders, printing cylinders, anilox rollers • Unwinder: Included • Rewinder: Included Additional details: • The machine is fully operational and has been well maintained. • Ideal for short to medium production runs with high flexibility. • All documentation available. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) Gsdpfx Aewmfzgjkajkb _____

Condition: like new (used), Year of construction: 2016, Canon Model: imagePRESS C10000VP Machine Type: Digital Color Production Printing Press Printing Technology: Electrophotographic digital color printing Year / Original Purchase: 2016 Original Condition: Purchased new from Canon Deutschland GmbH Serial Number: Impressions: 11 million Availability: Upon agreement Inspection: Possible by appointment Condition: To be confirmed / machine-specific current condition _____ ORIGINAL MACHINE CONFIGURATION The original Canon configuration includes: • 1 × Canon imagePRESS C10000VP • Large-capacity paper magazine • High Capacity Stacker H1 • Fiery Controller B4000 • Fiery Impose & Compose • Duplex Scanner • ORIS Lynx This equipment is documented in the original Canon configuration. _____ TECHNICAL SPECIFICATIONS Printing System • Digital electrophotographic color production system • Full-color and black-and-white production • Maximum print speed: up to 100 images/minute • Designed for continuous professional production • Automatic duplex printing • High-volume commercial print capability Print Quality • Print resolution: up to 2,400 × 2,400 dpi • High-definition digital color output • Designed for consistent professional production quality Paper & Media • Minimum standard media size: approx. 182.9 × 182.9 mm • Maximum standard media size: approx. 330 × 488 mm / 13 × 19.2" • Media weight: approx. 60–350 g/m² • Automatic duplex printing: up to 350 g/m² • Suitable for a broad range of coated and uncoated commercial printing substrates Paper Capacity • Standard system paper capacity: up to approximately 2,000 sheets • Depending on installed feeding options, the platform supports substantially increased paper capacity • The offered machine is additionally equipped with a large-capacity paper magazine. Gkjdpfx Akoztqyxeajb _____ HIGH CAPACITY STACKER H1 A significant advantage of this configuration is the original Canon High Capacity Stacker H1. The stacker is designed for professional production environments and allows large quantities of printed sheets to be collected efficiently. Canon specifies a stack capacity of up to 3,000 sheets at 80 g/m² for the C10000VP configuration, with a maximum stack height of approximately 302 mm.

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Gkjdpfjwwrywox Akaeb

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm Gjdpfx Aou Upafjkaekb - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Gkedey Sv Syopfx Akasb