Used Frei Ag Laquer Curing Tunnel for sale (7,702)

Year of construction: 2021, condition: ready for operation (used), Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. Hfsdpfx Abop Ecguehji

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Hfjdpfolvu Rujx Abhji

Condition: ready for operation (used), Weight: 2.2t, including documentation. Hsdpfx Aemqly Usbhjfi

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Hjdpfxsl Ax Tvs Abhofi

Year of construction: 1993, condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Hsdpfopcgy Hjx Abhjfi

Year of construction: 2020, condition: as good as new (ex-display), Plasma-nitrided rollers, 64 HRC hardness, max. sheet thickness 3 mm, Hedpfx Abog Ew Ixshjfi max. width 120 mm, repeat accuracy +/- 0.06 mm at a feed rate of 50 mm, 350 strokes/min. 180° clearance angle.

Year of construction: 2004, condition: refurbished (used), Precision feed system for strips up to approximately 100 mm wide and 2 mm thick. Feed force: 400 N. Repeatability: +/- 0.04 mm. Hfedpfxsg Iiuxo Abhoi

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N waranty 2 Years Hsdpelczm Iofx Abhofi

Year of construction: 2018, condition: as good as new (ex-display), Band width max. 140 mm Band thickness up to 1.5 mm Accuracy +/- 0.05 mm Hodpfecn Dv Nox Abhofi Tensile force 500 N (50 kg).

Condition: used, material width max. 100 mm material thickness 0 - 3 mm feed length max. 120 mm material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Hfsdpfx Aotqm Dbobhei

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,336 h, load capacity: 2,000 kg, lifting height: 4,650 mm, free lift: 1,600 mm, load center: 500 mm, mast type: triplex, construction height: 2,050 mm, gearing type: automatic, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,200 mm, tire condition: 100 %, empty load weight: 1,400 kg, total height: 2,050 mm, Linde L16 electric stacker built in 2018 with triplex mast, initial lift and free lift battery 2021 with 81% remaining capacity. Device has been checked and serviced and overhauled by a specialist dealer. Mast is triplex mast and a lifting height of 4.65m. Load capacity 1600kg. High-lift truck has a full free lift (forks move up without the mast extending up to 1600mm). The device also has an initial stroke for small bumps and ramps. Pallet truck is equipped with a weighing system!! Very good maintenance condition. No repair backlog. Hydraulic seal. Battery C5 Tested with 81% remaining capacity (C5 test) 309Ah / 375Ah see test result New drive wheels/support wheels. Hedpfewp R Scox Abhsfi Technical data: Manufacturer: Linde Model: L16AP Year of construction: 2018 Hours. 6336 Load capacity: 1600kg Height 2050 Fork length: standard Lifting height 4650mm Battery: 81% remaining capacity (c5 test) built in 2021 Mast: triplex Full free lift Initial stroke New wheels. Hydraulics tight. Driver's platform (foldable) with integrated HF charger 24v 30A WITH SCALE!! UVV is possible due to the good technical condition. Transport possible!! Please ask.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Hfodpfx Aoxxxqvobhei Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Hfsdjx R Dfropfx Abhoi Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Materials in contact with product: stainless steel. Useful capacity: 5 L Total capacity: 6.8 L Hfsdpox R A Husfx Abhsi Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: used, Year of construction: 1996, Manufacturer : Scholl AG Hedjx R Ddnspfx Abhjfi Type : Process tank Year: 1996   Possibility of adding bottom stirrer: 1.5 KW motor and mounting for mixer available. > This service may be subject to an additional quotation   Materials: 1.4571 stainless steel (Aisi 316 Ti) Capacity: 480 litres Pressure: 0 bar Temperature: 150°C Mechanical opening and closing   Jacketed : Materials: 1.4301 stainless steel Pressure: 3 bars Temperature: 150°C Capacity: 61 L   Dimensions : Height: 135 cm Diameter : 90 cm  

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Product information: Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm The saw heads can be continuously swiveled from 0° to 45° to the left and right, allowing for both external and internal dimension cuts. Indexing points at 15°, 30°, and 45° Hfsdpfx Aeyu Hupebhei Hydropneumatic saw feed for precise cutting, infinitely adjustable with rapid traverse Vertical and horizontal pneumatic material clamping devices ensure optimal profile fixation E 111 Electronics: Manual cutting length adjustment with digital display E 111 Switching between absolute measurement and chain measurement Retention of the displayed actual value in the event of power failure Technical Data: Minimum cutting length: 520 mm Electrical connection: 400 V, 3~, 50 Hz Power output per motor: 3 kW Compressed air connection: 7 bar The following accessories are also included: 1x Fixed workpiece support

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Hodpfsvbgiisx Abhofi Table size: 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Year of construction: 2018, condition: used, functionality: fully functional, Information about the machine: The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced. Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop. Machine description: - Efficient machining of aluminum, plastic, and steel profiles - Continuously positionable A-axis from -120 to +120 degrees - Linear guides for clamp movement - Processing results are improved by intelligent control technology - Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives - Thread cutting without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run required for main axes due to absolute encoder systems - Collision avoidance via automatic clamp recognition and positioning - Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering. Green-Line cooling unit for the control cabinet with reduced energy consumption. - Windows operating system - 15" flat screen, USB ports and network connection - Simple and convenient program entry using eluCam at the operating terminal – even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Safety enclosure for operator protection - Four horizontal pneumatic clamping units - Material stop left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical data: - Max. machining length (without face-side machining): 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining directions: 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm Hfedpfx Aboyr H Abohji - Max. spindle speed: 20,000 rpm - Spindle power: 7 kW, S1 (water-cooled) - Tool holder: HSK-F63 - Automatic tool change - 12 tool positions in automatic magazine - Max. disk cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp movement - Spanner Basic (with round guide) - Software: eluCam - Compressed air supply: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l with spray Accessories for the machine (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disk cutter - Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circle, for overlength processing - Various used tool holders and cutters - ESTA swarf extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW, and V6 files

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW Hedpfxsyddufj Abhofi The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: used, power: 140 kW (190.35 HP), Year of construction: 2013, CAT 328 D (328 DLCR ZTAL) Tunnel Excavator Many additional parts available for an extra charge, e.g., a complete upper carriage, etc.! • Power: 140 kW (190 hp) • Articulated/offset boom for tunneling applications • Quick coupler system • Blade support • Air conditioning • Short tail swing version • 11,600 operating hours • 600 mm track width • Includes 1 x 1.3 m³ digging bucket and 1 x ripper • Excavation depth: approx. 7 m • Unladen weight: 43,500 kg - German machine! - Fully functional! - All maintenance carried out by Zeppelin / Caterpillar Errors and prior sale excepted! Hsdpowmpcuofx Abhjfi = Additional information = Year of manufacture: 2013 Damage: none

Condition: new, Year of construction: 2025, functionality: fully functional, GMF Caliper Complete Set 2,500 mm, 3,000 mm, or 4,000 mm 1.) Base length: 1,500 mm or 2,000 mm 2.) Plus extension: 1,000 mm, 1,500 mm, or 2,000 mm Includes charger and receiver. The robust aluminum measuring rail is ideal for measuring glazing beads. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly extended mechanically up to a measuring length of 4,000 mm. - Automatic detection of extension Accuracy: ± 0.1 mm Resolution: 0.02 mm Measurement transmission via wireless interface to control unit or PC Microcontroller charger for battery pack, 100-240 V input voltage, and power adapter for Euro/UK/US/AUS Hfsdpfx Aoxu Hyqobhji NOTE: 1.) HECHT receiver software required on the customer's PC – available separately upon request. 2.) Can be retrofitted to HECHT Exenso Comfort length stops from year of manufacture 2016 onwards – available separately upon request. 3.) Can be retrofitted to HECHT DS350 double miter saws from year of manufacture 2018 onwards – available separately upon request.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min Hfsdexft I Aepfx Abhsi - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Hfodpfx Aexmh Uyebhji Customizable interfaces and software extensions possible. Contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) Hfjdpjw Exaajfx Abhei - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Hsdpfsxu Iaxox Abhsfi Freely configurable set values Switchable between absolute and relative measurement modes