NC feed As good as new

Keproma AG POD 80-600

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler Gsdpfshigmbox Abhjip LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Godpfegpxc Sjx Abheip Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Gedpfxjg U Utvo Abheip Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm Gedpjwgkq Tjfx Abhsip 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm Gsdpfx Ascxxx Rsbhsip straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Year of construction: 1987, condition: used, sheet width 150 mm Gijdpefn Aqlefx Abhop coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2016, overall weight: 2,220 kg, total height: 1,835 mm, controller manufacturer: MITSUBISHI, controller model: Meldas 700, This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016, designed for precision Swiss-type turning come with FMB bar feeder and LNS chip conveyor. It features a main spindle with a speed of up to 10,000 rpm and a counter spindle operating at 8,000 rpm. The machine accommodates up to 37 tools, enhancing its capability for complex machining tasks. It includes a Mitsubishi Meldas 700 controller for efficient operation. Consider the opportunity to buy this Citizen Cincom L20E-2M8 Swiss type turning machine. Contact us for more information. Gsdpfxox D Ilto Abhjip CITIZEN Cincom L20E-2M8 with FMB Bar feeder and LNS chip conveyorThe machine is suitable for efficient turning up to 20 mm in machine is designed to accommodate up to 37 tools for machining complex products. Tool sub-assemblies set:Vertical holder with 5 tools4–7 rotating tools for transverse radial machiningDrilling tools 3–9 for front machining0–4 rotating tools for counter spindle4–10 drilling tools for counter spindleBasic configurationBasic bed: block casting with strong linear guides (thermal and vibration stability)Main spindle: 10,000 rpm, C-axis, Ø passage 26 mm (max. bar Ø20 mm)W1: vertical holder with 5 tools (12 × 12 × 130 mm)3× GSC1310 radial rotating tools ER16 (1 kW, 7,500 rpm)GSE3210 rotating unit adjustable 0°/90° for milling unit (3× GSC1310 ER16)U124B drilling block (2+1) for deep holesCounter spindle: 8,000 rpm, optional C-axis, power 0.75/1.5 kWU153B driven tool unit for counter spindle (0.75 kW) + 4× SAU819 adapters Ø19.05Controller: Mitsubishi Meldas 700 (Windows OS, improved processor, LCD 8.4")Simultaneous machining on main and auxiliary spindlesNew sliding door cover design, space-savingTechnical dataMain spindleMax. turning length: 200 mmThroughput Ø: 26 mmMax. bar Ø: 20 mmSpeed: 200–10,000 rpmPower: 2.2 / 3.7 kWPositioning: C-axis (0.001°)Counter spindleMax. bar Ø: 20 mmSpeed: 200–8,000 rpmPower: 0.75 / 1.5 kWPositioning: C-axisMax. workpiece length in collet: 80 mmDriven toolsSpeed: 200–7,500 rpmPower: 1 kW5 tools (vertical holder) + 4–7 radial + 3 in Z-directionTools5 tools (12 × 12 × 130 mm)3-position drilling block on counter spindle (3× Ø25.4 mm)Back machining holders: 3–6 (Ø19.06 mm)GuidesCollets: E145Guide bushing: Neukomm 22.001Machine ER16 / ER11 Additional equipment • Clamping unit Ø25 mm • Pump 15 bar for rinsing the counterspindle • SAU819 adapters up to Ø8 mm • Transformer 3×400V/3×200V, 10 kW • Swarf conveyor LNS MH-HB • FMB Minimag 20/3200 bar feeder Dimensions Machine Depth 2300 mm

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Giedpfx Abod A Hbcjhep Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion Gsdpjdlcy Hjfx Abhjip open tool, a current UVV test is carried out before delivery and braking time measurement.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Giodjz H Dyjpfx Abhop