Used Glatt Wsg-C200 for sale (197)

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Dcedpsxu I Ddefx Aptsl

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Dedpfxotxquhe Aptocl

Condition: used, first registration: 01/2014, color: silver, Year of construction: 2014, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, tail lift aluminum, upright Dcodpfx Apjuf Slfjtsl Body: MBB C 2000 S. 2t tail lift, ALU. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs Dcodem Nclvspfx Aptsl - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: good (used), CV saws grinder Albert Göcker Dodpfxoqutd Re Aptocl

Condition: excellent (used), Year of construction: 2008, This Haul-off saw from our renowned brand SICA S.p.a. is in machine storage at Plastima Used Machinery. The saw is from 2008 and is in used but good condition. Dcodstpg Avjpfx Aptol Brand: SICA S.p.A. Type: TRS/SY 32-250 C 2000 Serial number: 0817501 Year of construction: 2008 Voltage: 400 V Power: 6 kW Pipe diameter max. 32 - 250 Ø (mm)

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, CNC control for Wenzel Dodpfjv Irygox Aptscl Type WPC2000 including control cabinet and handheld unit

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable Djdpfx Apeylynwetscl • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: used, Year of construction: 2007, container length: 24 ft, color: white, overall weight: 16,000 kg, empty load weight: 2,850 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,530 mm, machine/vehicle number: 476575, BDF swap body swap body with roller shutter * Steel box body smooth wall * Length 7.45 m * Roller shutter - fully repaired, fully functional! * Interior keyhole plate * Lashing eyes embedded in the side wall * Screen printed floor * neutral white WITHOUT lettering! * With chipped paint on the side walls and on the roller shutter door * Slight rust on frame and body * Parking height: 1.32 m * Loading height at the roller shutter: 2,370 mm always available! Dcedpfx Aponhlkcetsl Delivery possible nationwide! We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! All prices net plus VAT!

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm Dcodpfxszc Rl Ue Aptel FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: EKN7528, cooling capacity: 714.5 kW (971.45 HP), type of cooling: water, total width: 2,300 mm, total length: 7,050 mm, total height: 2,500 mm, Equipment: compressor, Used Trane RTAC 200 air cooled water chiller on R134A. Complete with Trane CHHP0N2TKE0N134A semi-hermetic screw compressor, condenser with 14 fans that produce a total airflow of 185.400 m³/h, shell and tube as evaporator, braced heat exchanger and a control panel with a Trane Adaptive controller. Dcsdpferlk E Tjx Aptol

Condition: new, functionality: fully functional, empty load weight: 114 kg, maximum load weight: 636 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,910 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 200 NEW VEHICLE Internal dimensions: 200cm x 106cm Total weight: 750 kg Payload: 636 kg Side board height: 30cm Unbraked single-axle flatbed trailer Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor Dedpszk Hwnofx Aptjcl 13-pin electrical system Rear lights with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be stored on the rear panel Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards 40cm - Aluminum cover with bracket for, e.g., bicycle carrier - Flat cover with or without frame - High cover 80cm or 110cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available on request! Pictures are for illustrative purposes only and may show accessories that incur an additional charge. Plus vehicle registration document and freight to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: used, functionality: unexamined, The EL-BPC 200 industrial computer from Eckelmann Industrieautomation was removed from a palletizing robot system. Dcodpfjzfwmvjx Aptel

Condition: used, functionality: fully functional, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200/AV - With feeding units - Min/max diam. 10/100mm Dcedex Rn Tgspfx Aptel - Motor 5.5hp - Volt. 380v/50hz

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Dsdexc E H Sspfx Aptecl Available 24.08.2024 *

Condition: used, Year of construction: 2007, container length: 24 ft, color: white, overall weight: 16,000 kg, empty load weight: 2,850 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,530 mm, machine/vehicle number: 476575, BDF swap body swap body with roller shutter * Steel box body smooth wall * Length 7.45 m * Roller shutter - fully repaired, fully functional! * Interior keyhole plate * Lashing eyes embedded in the side wall * Screen printed floor * neutral white WITHOUT lettering! * With chipped paint on the side walls and on the roller shutter door * Slight rust on frame and body * Parking height: 1.32 m * Loading height at the roller shutter: 2,370 mm Djdenh Htvspfx Aptocl always available! Delivery possible nationwide! We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! All prices net plus VAT!

Condition: used, first registration: 01/2002, color: silver, Year of construction: 2002, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, aluminium tail lift, upright Body: 2t tail lift BÄR BC2000S4 ex-Bundeswehr! Dcsdomn Sdfspfx Aptel Dimensions: approx. 1,760 mm x 2,500 mm ACCESSORY INFORMATION WITHOUT WARRANTY, SUBJECT TO CHANGES, INTERIM SALE AND ERRORS RESERVATION!

Condition: used, functionality: fully functional, input voltage: 380 V, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200/AV - With feeding units - Min/max diam. 10/100mm Dodpfxsx Rn Taj Aptscl - Motor 5.5hp - Volt. 380v/50hz

Condition: used, Year of construction: 2007, overall weight: 16,000 kg, empty load weight: 2,850 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,530 mm, container length: 24 ft, machine/vehicle number: 481747, BDF swap body swap body with roller shutter Dcedong Hb Ijpfx Aptsl * Steel box body smooth wall * Length 7.45 m * Roller shutter - fully repaired, fully functional! * Interior keyhole plate * Lashing eyes embedded in the side wall * Screen printed floor * neutral white WITHOUT lettering! * With chipped paint on the side walls and on the roller shutter door * Slight rust on frame and body * Parking height: 1.32 m * Loading height at the roller shutter: 2,370 mm always available! Delivery possible nationwide! We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! All prices net plus VAT!

Condition: excellent (used), Year of construction: 1998, operating hours: 94,737 h, clamping force: 2,000 kN, screw diameter: 60 mm, injection pressure: 1,440 bar, injection weight: 427 g, Arburg 470C-2000-675 (Nr. 40) without picker Year of production: 1998 TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 427 Injection Pressure [bar]: 1440 Djdpfovt Tb Ajx Aptecl Clamping Force [kN]: 2000 Tie Bar Distance [mm]: 470x470 Platen Size [mm]: 715x715 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: Polish, German OTHER Power [kW]: 45,8 Workinghours [h]: 94737 Weight [kg]: 6630 EUROMAP

Year of construction: 1995, condition: used, Quantity available : 5 units Volume: 200 L Material: Stainless steel Dcsdex R Am Ijpfx Aptjl Year : 1995 Reference : CC200l Total top opening Diaphragm valve: Ø 20 cm Dimensions : 85 x 125 x 70

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 Dcodpfogpwgajx Aptol price: 9.400€ contact : Mr. Rainer Eckerle

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 price: 8.900€ contact person: Mr. Rainer Eckerle Dcodogkvtxopfx Aptol

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Dedpfowlgr Rjx Aptjcl Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2013 Dedehqmpxjpfx Aptscl price: 7.500€ contact person: Mr. Rainer Eckerle