Used Gom Mbh Atos Ii for sale (4,904)

Year of construction: 2023, condition: ready for operation (used), A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible. Knodpfx Aex Ivikjklsa

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Ksdpfxev Ip R Ae Akljna

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Knsdpfjxf Iklsx Aklja

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Kedpfx Akezcfhdolena

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Knodpszka I Tefx Aklja

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, overall weight: 5,700 kg, number of axes: 4, This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details. Knjdpfx Akszpypujlsa -Information • • CNC control: MAZATROL MATRIX NEXUS 2 / MATRIX II • Working capacity: • Maximum swing diameter: 640 mm • Maximum machining diameter: 380 mm • Maximum machining length: 500 mm • Bar capacity: 77 mm • Axis travel: • C-axis rapid movement: 550 (as stated) • Tailstock travel: 500 mm (as stated) • Main spindle: • Chuck diameter: 250 mm • Nose: ASA 8 • Counter spindle: • Chuck diameter: 210 mm • Maximum speed: 5,000 rpm • Nose: ASA 5 • Driven tools: • Maximum speed: 5,000 rpm • Feed rates: • X-axis rapid traverse: 36,000 mm/min • Z-axis rapid traverse: 36,000 mm/min • Coolant tank capacity: 300 litres Additional equipment • Automatic loading and unloading system by MECCANO • FANUC ARC Mate 100iC/12 robot (per photos) • Tooling package as shown in the photographs and video • Assorted tool holders as shown in the photographs Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2002, condition: good (used), Build in 2002 Ksdpfx Aed S Su Tjkljna

Year of construction: 1998, condition: used, 420 x 300 mm 18,000 units/hour Main product infeed Knodpfx Aobngfgoklea Vacuum opening station 1 tandem product attachment station 2 product attachment infeeds 1 tandem product attachment station

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Kedpfx Aozupxcekljna Brand: HERA Year of manufacture: 1977 Type: UM 2 Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Length (mm): 3820 mm Width (mm): 800 mm Height (mm): 1850 mm

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes Kodpezn Uqqjfx Akljna • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TD2002/2360, DEMAG KBK overhead crane system with approximate dimensions of 3x4m (4m span) This crane is available in multiple units! Other sizes are also available – please inquire! Load capacity / lifting capacity: 800 kg - 0.8 tons Technical data of the system: Crane system with Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. The crane has internal power supply Includes 800 kg Demag DKES chain hoist (infinitely variable) - lifting height approx. 3m The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Kodpfx Ajztut Nsklena Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Knjdpfx Akoztutvslsa Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: excellent (used), Robert riser roto claw its just had brand new electrics. Handles blocks up to 9.5’’ thick and 21’’ wide. Blocks can be stacked using the built in air operated loader to achieve higher production. Knsdpfxsur Ngus Aklea

Condition: used, mileage: 1,10,000 km, power: 105 kW (142.76 HP), first registration: 02/2017, fuel type: diesel, next inspection (TÜV): 06/2027, color: orange, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, parking heater, soot filter, Engine runs without any problems! When a gear is engaged, the engine stalls. Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, trailer socket 13-pin, audio system Audio 15 (radio with color display), outside temperature display, additional battery (reinforced), mounting rails for roof racks, roof console with reading light on the driver/passenger side, dome light in the cargo area with door contact, windows for rear doors in black glass, heated rear window, windows in the cargo/passenger compartment: - fixed, front right, rear door (opening angle 270 degrees), steering wheel (steering column mechanically adjustable), crossmember with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under the end of the frame including jack, interior rearview mirror, mud flaps rear, mud flaps front, seats in the cab: heated passenger seat, seats in the cab: heated driver's seat, seats in the cab: comfort suspension seat, passenger side, seats in the cab: comfort suspension seat, driver's side, stabilizer bar rear, reinforced stabilizer bar front, reinforced shock absorbers, fuel gauge for auxiliary heater, separation relay with additional battery, trim in the cargo/passenger compartment: plastic, fleece battery 95 Ah, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric, generator 250 A, auxiliary heater (hot water), assist for closing sliding door right Additional equipment: 3rd brake light, adaptive brake light, airbag driver side, display for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, braking system with ABS+ASR, headlining in the cab, lockable glove compartment, body/superstructure: standard high-roof van, rear swing doors raised and high roof, child safety lock, fuel tank: main tank 75 liters, continuous cargo compartment partition, load securing/tie-down points, headlight range adjustment, model upgrade, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to exhaust standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval display Assyst, permissible gross weight 3.50 t Ksdpfszthdnex Aklsna

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Knjdpfoznnl Iex Aklsa Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C Knedpfxsznu S Ue Aklja * Max. permissible melt pressure: 120 bar Features / Advantages * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Condition: used, mileage: 6,38,000 km, power: 375 kW (509.86 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 06/2027, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Volvo FH 500 4x2 semi-trailer tractor * Euro 6c * I-Shift transmission * Globetrotter XL cab with 2 bunk beds * Roof and side spoilers * Lane Keeping Assist Kedpfxezth Ruo Akljna * Collision Warning System * Differential lock * 2 tanks, approx. 1100L * Automatic climate control * Heated seats * Radio/CD/AUX * ADR EXII EXIII FL AT valid until 06/27 * MOT (technical inspection) valid until 06/27, next inspection due 12/26

Condition: good (used), Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor Knsdjzmq Nyjpfx Aklja -Manufacturer: Endress+Hauser, boundary level detector set, unused, original packaging -Type: Soliphant II FTM30-A2AA1 -Quantity: 1 detector available -Dimensions: 360/125/105 mm -Weight: 1.6 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 13304, type of input current: three-phase, workpiece height (max.): 45 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 2,250 mm, edge thickness (max.): 3 mm, actuation type: electric, total length: 10,000 mm, total width: 8,500 mm, Equipment: CE marking, documentation/manual, We offer a two-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3, manufactured in 2000, renowned for its reliability and efficiency in professional edge processing. This model handles workpieces with a thickness of 10 to 45 mm and a width of 270 to 1300 mm, offering versatility in working with various materials. The feed rate ranges from 6 to 30 m/min, enabling efficient production while maintaining high quality. The machine handles edge banding with a thickness of 0.7–3 mm and workpieces with a length of 270 to 2250 mm, making it an ideal solution for demanding industrial applications. This is a robust option for companies seeking proven machines in good working condition. The machine features a new Beckhoff control system. Kodpfxozgb A Ds Aklona It is possible to purchase the entire line, including a roller conveyor equipped with a conical rotating table and a two-chamber automatic loading station.

Year of construction: 2012, condition: like new (used), Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control Ksdjikbdvopfx Aklsna

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 000716, turning length: 130 mm, spindle speed (max.): 8,000 rpm, overall weight: 1,300 kg, bar passage: 16 mm, type 510 j - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control Kedpfewrdxbjx Aklsna

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm * Roll diameter: max. 1260 mm Knjdpfx Aksuh Slkolja * Max workpiece weight: 22.4 T

Condition: used, mileage: 8,37,700 km, power: 371 kW (504.42 HP), first registration: 03/2013, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Starliner C * FIRST GERMAN OWNER + ready for registration * Maintained according to service schedule * very good tires on all axles (front axle completely retreaded in 06/2026) * 371 kW / 505 hp - EURO 5 - EEV * ABS, ASR, EBS, ESP * Retarder * Cruise control * 50 + 2 + 1 seats * Vehicle length: 12,990 mm * Ski compartment Knsdpfxozbfz Io Aklea * Toilet * 220 V socket in the luggage compartment / driver's area * VOLTAGE CONVERTER 3000 W * Fire alarm and extinguishing system * Air-conditioned driver's seat * Navigation system that can be displayed on monitors * Driver's view camera * Rear view camera * Extended sleeping cabin * AIR CONDITIONING * Auxiliary heater * Convector heater * DVD player * External power supply * Alarm system * Onboard kitchen * NEW TACHOGRAPH generation installed * MAN invoices available: oil cooler replaced, exhaust turbocharger, disc brake caliper, high-pressure fuel pump, axle link, brake disc, shock absorber, etc. * etc. * Vehicle has very good features. * FIRST GERMAN OWNER with maintenance records (various invoices from MAN available). * Vehicle registered and in operation (mileage and condition may vary) * Undercarriage in good / clean condition * Brake cylinder, drive axle, replaced 08/2026 * Note: * The customer is obliged to independently verify the condition and features of the goods / vehicle! * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions * Note: The customer is obliged to independently verify the condition and features of the goods / vehicle! All information without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 65 mm, workpiece length (max.): 2,500 mm, workpiece height (max.): 65 mm, workpiece width (max.): 1,000 mm, Equipment: documentation/manual, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces. Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15” touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Kedpfozr Ud Sjx Akljna Measurement: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Angularity ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Borehole diameter ⦁ Borehole depth (relative) ⦁ Radii / diameter ⦁ Groove position ⦁ Groove depth (relative) ⦁ Fold position ⦁ Fold depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram, or trapezoid) Procedure: 8 points of the workpiece are scanned (two points each on every line at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angle Protocol: When target values and tolerance specifications are entered, a target/actual comparison is created with deviations and displayed in a table. Storage of the measurement results as a PDF (protocol) or in an SQL database for statistical analysis. Inspection and documentation of the manufacturing status in the production process, after cutting, after edging or after drilling the workpieces, depending on the value-added process. Vacuum system (Venturi principle) 6 vacuum suction cups integrated in the measuring field fix the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/Control 17” Touchscreen HECHT DesQ II software Windows 11

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr Ksdjvw Evgspfx Aklona