Used Graewe Automatic Setting Wrapper for sale (28,186)

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Hedpfx Acezt H Rashjnr Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: SHMZ0116, Equipment: CE marking, Automatic wet wipes production line Hnodpfjzn Hftox Acher This machine designed for wet wipes packaging design and the vertical fold. the institution, fast speed, smooth operation, and can automatically accomplish:wet wipes fold →inside and outside liquid →slice, add bag making → sealing →count →a batch number → products output and so on many features, effectively avoid the wet wipes in packaging process of secondary pollution. the machine iscompact, and easy, safe, is the wet wipes packing device of choice, suitable for single piece of wet wipes the automatic packing.

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Hedpfxjztpbzo Achonr Power supply 380V Weight 1580kg

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Hnsdpfx Aoztn Iyjchor Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Hsdpfx Aozrt Ivochjnr Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2025, - Mechanical structure capable of cutting aluminum profiles at angles between 22.5° and90° with high speed and quality Hedpfx Ajzuv Ecechenr - Precise mechanical structure offering automatic positioning for 22.5°, 45°, and 90° angles,and manual positioning for intermediate angles - Stress-relieved cast and welded parts to ensure constant high-speed precision - Profile fixing pistons - Right-hand profile support stand - Safety covers - Single-head operation - 7'' touch screen - Ethernet connection - Ø 550 mm saw - Coolant spray system - Hydropneumatically controlled, adjustable saw feed rate

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Hedpfx Asy Twkmochenr Automatic Stacker: NATGRAPH Raised Fully Cleaned

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Hnodsztrfcopfx Achor Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Stanzautomat für Kalender und Notizbücher / Punching Machine for Calender and Notebooks Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Hjdpfx Ajzuz R Dechjnr Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Max turning diamater 15 mm Hsdpoyy Nz Rsfx Achjnr

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers a wide range of functions and high capacity in a compact, mobile unit. We have increased the capacity – the maximum wood diameter is now 31 cm, and the length is 50 cm. Technical specifications: Log diameter: 310 mm Splitting force: 5.6 tons Splitting wedge: 4-way Log length: up to 50 cm Oil capacity: 30 l Motor output S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping available upon agreement. Fair prices. Price for basic version, demonstration model – optional equipment extra. ❓If you have any questions, please don't hesitate to contact us – we will respond quickly and courteously! Hnedpjxx Szhefx Achor

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces Hnodpfx Aodzp T Nocher - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Hnsdpfozrfcxsx Achjr Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Hnodpey Sw I Nefx Achjr Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT Hnsdozuzw Dspfx Acher with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes Hnsdpfx Ajzuzbcechsr - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Hsdpezuymkefx Achonr Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, CNC long-turn lathe Manufacturer: STAR Type: SR-38 B Year of manufacture: 11/2016 with: FANUC 31i-B5 control system Hjdpozuwuljfx Achenr Synchronous spindle Powered tools X3-axis B-axis Y2-axis Backworking capability Parts conveyor Fire extinguishing system Chip conveyor High-pressure pump Bar feeder magazine FMB LSK 38 Powered tools C-axis Backworking capability High-pressure pump Parts conveyor Chip conveyor Fire extinguishing system Bar feeder magazine FMB LSK 38 / 3200

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools Hedpfotzyx Tex Achonr stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm Hedezuygqjpfx Achsnr • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Hnsdewuck Ijpfx Acher Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Hnsdpfx Acswm Rqtjhsr Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1624, tooth pitch: 1 mm, We offer this new ILPRO Technology I80GF-C saw-blade sharpening and I70 GF setting machine, year of manufacture 2025. Model: I80GF-C sharpening machine for bandsaw blades Serial number: 1624 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 1-28 mm Clearance angle 0°-12-20° Teeth/minute 10-100 Model: I70GF setting machine for bandsaw blades Serial number: 1625 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Hsdpfx Aszudfwechsnr Tooth pitch 3-28 mm Clearence angle 0°-12-20° Teeth per minute 120-200 If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 090-023, We offer this new OPPLINGER Optimatic RSMO 090 automatic leveling and tensioning bench, year of construction 2015. Hnsdjzuc Nbepfx Achjr Type: RSMO 090 Serial number: 090-023 Technical details: - Level, Tension, Pull Back, Set Tires - Microprocessor control - Touch screen 12,1 ″ - width of band saw blades 65 – 300 mm - length of band saw blades 4300 – 19800 mm - Blade thickness 0,7 – 2,7 mm - Electric supply 3x 400VAC– 50Hz or special voltage - Pneumatic supply 0,7L / Hub 5 Bar - Weight 700 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Hnsdpfezg U R Ijx Achjr Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar