Used Hapfo Typ Ap 1000 for sale (12,666)

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm Nedpfxoyy A D So Aiyeda distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Machine has 9 controled axes and a Laser controled crowning arrangement.

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension Nsdpfx Aeyr Izxsiyeda - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle speeds : 4.000 [rpm] - Spindle power : 22 [kW] - Max. bar diameter : 80 [mm] - Max. diameter on bench : 780 [mm] - Max. turning diameter, turret 1 : 370 [mm] - Max. turning diameter, turret 2 : 260 [mm] - C axis indexing precision : 0,001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - Live tools speed : 6.000 [rpm] - Live tools power : 3.7 [kW] - X/Z stroke : 225 / 1050 [mm] - Y stroke : [mm] - Rapid traverses rates (X/Y/Z) : 25 / 15 / 30 [mm/min] TURRET 2 - Number of positions : 8 - X/Z stroke : 170 / 1050 [mm] - Rapid traverses rates (X/Z) : 25 / 30 [mm/min] TAILSTOCK - Tailstock type : Numérique - Distance between centers : 1030 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 54 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.400 x 2.800 [mm] - Machine height : 2.570 [mm] - Machine weight : 9.100 [kg] MACHINE HOURS - Number of working hours : 22.857 [h] EQUIPMENT - CNC : Mori MSX-853IV - 3 colors status lamp - Coolant tank * with high-pressure pump - Rest : SMW AUTOBLOK SLU 2 : 12-101 [mm] Ndjdpsziqgdsfx Aiysa - Chips conveyor : DROITE - Tool probe - Electric transformer

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] Nsdpfxexy S A Ie Aiysda - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Njdpfx Aijtyyn Hjyoda

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Nsdpfx Aioign Efjyoda

Year of construction: 2014, condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Nsdpfx Ajv Suftjiyoda

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Nedpsyw Sv Sofx Aiysda

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Ndodpsy Ndfpjfx Aiysa

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Nsdpfx Aiezulg Njyoda

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Nedoyypl Aspfx Aiysda

Condition: good (used), machine/vehicle number: 15473, Year of construction: 2019, operating hours: 3,873 h, load capacity: 1,400 kg, lifting height: 2,430 mm, free lift: 1,250 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,210 kg, 5187281 Serial Number: W41173V00441 Njdpezfuz Dsfx Aiyjda Battery Details: 24V

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t Nodpozkvvysfx Aiyeda dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: used, RA1851 electromechanical pusher installed in a support frame made of aluminum profiles Function: Push-off of the incoming material 90° to the conveying direction Make: Transnorm outer dimensions of the frame: LxWxH=1.720x1.080x940 mm suitable for infeed conveyor up to 1000 mm total width dimensions of the push-off panel: H=600 mm, W=650 mm total weight: 108 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Nedjk Abhdspfx Aiyoda Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Nsdpfx Aozcfi Uoiyjda

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Ndodpfsxyk Upex Aiyoa

Condition: as good as new (ex-display), Year of construction: 2018, Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Nedpfxeud Dzps Aiyoda Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Njdpfxevvkqgo Aiyeda Storage location: Nattheim

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Nedpfx Aow N Hk Hsiyeda

Condition: used, Year of construction: 1997, machine/vehicle number: 79, Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Nsdpfx Aolg Aahoiyeda Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Quantity: 7 pieces Nsderxgw Rspfx Aiysda -Price per piece -Weight: 66 kg

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 Ndjdpfxerhmnas Aiyja -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Condition: good (used), clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1000 mm with cutout see photos -Table height: 920 mm Nedpfx Asv Hxgwjiysda -Plate thickness: 20 mm -Transport dimensions: 2000/1000/H920 mm -Weight: 347 kg

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/620/H380 mm -Load capacity: 1.5 t -Tires: Ø 255 x 70 mm solid rubber Nodeucaglopfx Aiyoda -Total dimensions: 2070/620/H380 mm -Weight: 98 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1000 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 9x roller conveyor available -Price per piece -Dimensions: 1480/1190/H680 mm Ndsdpfx Ajtlzfceiyja -Weight: 200kg/pc.