Used Helpman Evaporator for sale (395)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Hedpfoyr H Anex Akrjnu Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER Hodpfx Ajyvrwtjkronu MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Year of construction: 2005, condition: used, functionality: fully functional, Evaporation station for apple concentrate with an input juice capacity of 24,000 liters Hedpfx Aoxn Ugfokrjnu

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Hnsdpfx Akezz Sidsrou Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, Evaporator LUVE -Type: CS64H 3306GB 7SP.BAC.I -Cooling capacity: approx. 40 kW at DT8K -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 3050 x 900 x 1100 mm -Place for electric defrost -Volume: 35 L Hnjdpfx Akoz Smlhorsu -Quantity in stock: 2 -Reference number: CH 623 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Year of construction: 2012, condition: used, Teas Wrap Around Evaporator (2012) Hnodpfx Akez I R R Rerou Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Hnodeyvrtuspfx Akrju Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Year of construction: 2023, condition: used, functionality: fully functional, For sale: 300-liter vacuum concentrator – in almost new condition! Hodpfjz Iwxnox Akronu Hagyo Vacuum Universal 300, an industrial vacuum concentrator manufactured in 2023, used only 10-12 times. Regularly serviced and ready for immediate operation. Vacuum concentration is an extremely gentle process: the water evaporates at a temperature below 50 °C, thus preserving the color, aroma, and nutritional values of the raw material, and the final product becomes much more enjoyable. Ideal for: concentrating pressed fruit juices to a jam-like consistency with a high refractive index, at low temperatures, without damaging the fiber and aroma characteristics, concentrating vegetable juices to a jam-like consistency (e.g., pumpkin, carrot, beetroot), extracting spices and herbs at low temperatures. Unique modifications made to this machine (not found on other machines in the series): high-performance defoaming unit, a 300-liter collection tank with a cleaning opening instead of the standard 100-liter tank, so the machine does not need to be stopped for emptying, new silicone elements on the mixing blade. Key features: 300-liter filling volume stainless steel construction, double-walled, with heating jacket mixing and vacuum system with automatic temperature control stainless steel final cooler (condenser) built-in CIP cleaning system, each unit can be cleaned separately evaporation capacity: 30 l/hour (at 50 °C) electrical connection: 400 V, 38 kW (3×63 A) overall dimensions: 2000 × 1550 × 2550 mm Hungarian-language operating manual and machine documentation included Price: 12,000,000 HUF Viewings can be arranged in Szenna (Somogy County) by prior appointment. Reason for sale: change of business profile. Write a message, and I will send you more details!

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Hsdpfx Akszvdftjrenu

Condition: excellent (used), functionality: fully functional, LU-VE mod EAV8s 7221 H/V for cooling media glycol / water fluid R134A-R404A 4x fans. Hodpfx Ajz I S Rfokrenu

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III fill system, which allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Main Features of the S1500E Series Maintenance Access: A large, inward-swinging access door, as well as internal maintenance platforms, allow technicians to conveniently perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight through special air inlet elements, which reduces algae growth. Flexibility: Thanks to the single-sided air inlet, the cooling tower can also be installed in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. Air Conditioning (HVAC): Used in large building complexes as part of a central chilled water system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity because the actual performance depends entirely on the prevailing thermodynamic ambient conditions and the system temperatures. This model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the inlet warm water temperature (e.g., 35 °C) and the outlet cold water temperature (e.g., 29 °C). Air volume flow: According to the technical data from BAC, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three 11.0 kW fan motors. If this air volume is reduced by a frequency converter (e.g., during nighttime operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of cooling capacity the tower produces. Technical Data: Fan & Air Data Air volume flow: 60.0 m³/s (generated in draw-through operation) Fan motors: 3x 11.0 kW (axial fans) Technology: Integrated belt drive Water flow: 198 l/s Hnedpoynkbmsfx Akreu Hydraulic Connections Water inlet (fluid inlet): 1x DN 250 (nominal size ND 250 mm) Water outlet (fluid outlet): 1x DN 300 (nominal size ND 300 mm) Make-up water connection: 1x DN 40 (ND 40 mm) Overflow / drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions & Weights Operating weight: 11,446 kg (including water filling up to the overflow) Shipping weight: 5,350 kg (empty weight) Heaviest single part: 3,

Condition: used, Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible. Hodpfx Akoz Ibx Eerenu

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Hedpfx Ajzvllbokronu

Condition: used, functionality: fully functional, overall weight: 293 kg, volume flow: 369 m³/h, LGL double flux Evaporator for Coldstores Rated capacity at 0C°/-10C°= 50 KW Hnjdpeztbypsfx Akrju 5 x fans 450 mm diam.,4 pole Tube content: 49L Fin spacing: 7mm Coils anticorrosion treated w. blygold

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Hjdpforlk Dcjx Akrenu

Condition: used, Year of construction: 2007, Used Kuba SGL 56-F62 evaporator on Freon with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 15.800 m³/h. Hnedorlk Dkjpfx Akreu

Year of construction: 2007, condition: excellent (used), Evaporator GOEDHART, type VRZ 126310-GFP - 2 identical pcs. in stock. PJV071924-01 and PJV071924-02 Qo=39.3kW, Vo.x=25750 m3/h, F=262m2, 2 fans with diameter 630mm, s=10mm, dimensions of the cooler: LxBxH: 286 х 126 х 111 cm; Coolant (NH3) Hjdpoip Ungofx Akrjnu Very good condition Price Euro 1800 Euro + VAT per piece, negotiable, ExWorks: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Hnjdpfjrlk Dgsx Akreu

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Hodpfov Ua Uxex Akrenu

Condition: excellent (used), Year of construction: 2016, Evaporators SS/AL (Sequential Defrost) / number of coils: 3 from M7 freezing tunnel Refrigerant: CO2 Unit name: 3xGCO K/16/16/.../2920/G/V/V/3 Unit serial number: 404429274/32.01317 Volume (V): 284,9 l Year of manufacture: 2016 Hnedjx H Sacepfx Akrou

Condition: used, Evaporator Guntner -Type: GHF 050.1D/47-A -Cooling capacity: 43.9 kW at DT8, 34.1 kW at DT7 -Fin spinning: 7 mm Hnodpfx Ajzxzmaskreu -Fans: 4 x 500 mm -Dimensions: 4380 x 700 x 860 mm -Place for electric defrost -Refrigerant: Freon -Volume: 54.4 L -Weight: 270 kg -Quantity in stock: 9 -Reference number: CH 612 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F42 -Cooling capacity: 25.3 kW at DT8, 20.2 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3080 x 930 x 1130 mm -Refrigerant: Freon -Volume: 29.9 L Hedpfozt Sczox Akronu -Quantity in stock: 6 -Stock number: CH 615 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator Goedhart -Type: VCI-42637 -Cooling capacity: 29.5 kW at (-8/0°C), 20.9 kW at (-25/-18°C) -Fin spinning: 7 mm Hedpozt Sfiefx Akrenu -Electric defrost -Fans: 2 x 630 mm -Dimensions: 2860 x 920 x 1130 mm -Volume: 38 L -Weight: 342 kg -Quantity in stock: 2 -Reference number: CH 589 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Hedpfx Ajg N Db Hokronu Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, Evaporator Alfa Laval -Type: THOR-Z 428-7 -Cooling capacity for R404A: 33 kW at DT8, 29 kW at DT7 -Fin spinning: 7 mm Hnjdpfjzxzfvsx Akrju -Fans: 2 x 500 mm -Dimensions: 2500 x 1870 x 1100 mm -Capacity: 64 l -Weight: 228 kg -Stock quantity: 2 -Condition: used in very good condition