Used Hommel-Etamic C 305 for sale (55,018)

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Lsdpsziizyefx Alyjah Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Lajdpfjy Hkd Hjx Alyjh Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, ESPEC Type: PL-3KPH ESPEC Climate Testing Chamber / Environmental Simulation Chamber Model PL-3KPH Air-cooled version Ledpfjy H H Iusx Alyoah For sale is a high-quality ESPEC climate testing chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows STOP / ready for operation. Technical data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): 600 × 850 × 800 mm External dimensions (W x H x D): 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Weight: approx. 350 kg Cooling: air-cooled (no external water connection required) Refrigerant: R404A Equipment / Features Touchscreen control panel Program and constant operation modes BTHC temperature and humidity control Observation window in the door Stainless steel test chamber Internal lighting / Chamber lamp Side cable entry Overheat protection Hour meter integrated Industrial design For your security as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Scope of delivery ESPEC Climate Testing Chamber PL-3KPH Scope of delivery as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading with a forklift can be organized. (Subject to changes, prior sale, and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Laodpfx Alszg Twmeyeh Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators Type: Walk-in climate simulation chamber KKC 22/45 Laedpfszg Txdjx Alyeh Water-cooled Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.5 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Lasdsza Dv Iepfx Alyeh Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification, heating jacket VT 6025 Temperature (metric): 200 °C Dimensions, internal (W x D x H): 300 x 307 x 275 mm Dimensions, external (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Type of heating jacket: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Lsdpfxjzgbqzs Alysah Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Lodpszd R Azsfx Alyoah Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Lasdpfx Aezd Ultjlyjh Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) Lajdpjzg Tpcefx Alyoh (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Laodpszg Tpijfx Alyjh Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Lodpfszg Tp Njx Alyjah Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch   Type: VCS 7033   Vötsch climate chamber VCS 7033, water-cooled   Temperature range: -70°C to +180°C   Temperature change rate:   Heating: 7.5 K/min Cooling: 6.5 K/min   Humidity range: 10% to 98% RH   Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K   Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm   Side feedthrough: 90 mm diameter   Approx. 330 L, weight: 600 kg Lasdpfxezfy Rqe Alysh   Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW, rated current: 17 A   Refrigerant: R-404A / R23   For your safety as a buyer, please note the following:   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Lasdpfx Alszfy Rwjyeh Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled Laodpszhkfqjfx Alyjh For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: good (used), mileage: 3,61,575 km, power: 338 kW (459.55 HP), first registration: 04/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,760 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,100 mm, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, tachograph, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Carplay - Digital tachograph - Fixed - Halogen lamp - Highline - Manual - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8281 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 1095 liters, 2nd diesel tank, Height of fifth wheel coupling: 113 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 375 tons, Suspension type: Air suspension, Type of cab: Highline, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 8, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 338 kW (453 hp), Engine displacement: 12742 cc, Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, HL, auxiliary air conditioning, 2x tank = Additional Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 12 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 12 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Unladen weight: 8,281 kg Payload: 10,719 kg GVW: 19,000 kg Maintenance APK (Technical Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €1,091 per month (default, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock Laodpfx Alszazwijysh • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), lifting height: 22,000 mm, General information Year of manufacture: 2022 Operating hours: 2.329 Weights Empty weight: 4.700 kg Functional Lifting capacity: 3.990 kg Dimensions of cargo space: 430 x 80 x 193 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information Ledpfx Alozlha Toyeah = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C10 * 2022 * Diesel and 400 Volt drive * 2,329 Operating hours * Fly jib * Hoisting winch max 4,000 kg * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * Recently replaced slewing ring * 3,990 kg lifting capacity * 4,700 kg dead weight

Condition: used, Zwick Testing Machine Type: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions H x W x D: 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer, 13.5 mm MFA 25 extensometer (temperature range up to +200°C) Computer + testXpert II V3.5 software Climate chamber: Airtemp LKG-K-TK-50 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Lasdpfxjzil Ups Alyoh Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. Ljdpfx Aezii Nqjlysah The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Lasdpjzimaaefx Alysh We would be happy to answer any further questions you may have by telephone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers Lsdpfeztyabex Alyoah GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, final pressure: -0.93 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, protection type (IP code): IP54, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was overhauled in 2025. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller re-machined. Pump housing and machine components fully surface-treated and coated. Ljdjy Hf Imopfx Alyjah

Condition: used, CTS Type: CW-40/16 CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Ljdpfx Aljzd R A Ueyeah Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Ledpfx Aljhp Rdloyeah Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Laedpsdqzh Tofx Alyoh Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -