Used Husmann Automatic Stationary Press + Containers for sale (36,689)

Condition: new, Equipment: compressed air system, Refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter For use in environments where compressed air quality as well as durability and efficiency are essential V-belt drive Long service life thanks to two-stage high-performance compressor units with low speed Specially machined cast iron cylinders for minimal oil consumption and long service life Cedpfx Afowwi Acj Asrd Optimal cooling via large fan wheel Motor with overload protection Easy condensate drainage through standard 1/2" ball valve Supplied as standard with Condor pressure switch and pressure gauge Supplied as standard on safety base pallet with vibration dampers Tank manufactured according to German AD 2000 regulations Intake capacity: 650 l/min Filling capacity: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor output: 4 kW / 400 V

Condition: used, This listing is for the Spectrum Labs Krosflo Research 11 TFF System The unit is in full working condition and is ready for immediate use Cedpfxjxv Axxs Af Ajrd The KrosFlo® Research II TFF System by Spectrum Laboratories is a laboratory-scale filtration system designed for microfiltration and ultrafiltration applications. It is particularly suited for research and development processes involving volumes ranging from 2 mL to 15 L. The system is ideal for biotechnology, pharmaceuticals, and academic research laboratories where precise and controlled filtration processes are required.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Cjdpfxozgc Uue Af Aerd Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: not inspected (used), Year of construction: 2011, operating hours: 7,219 h, overall weight: 22,000 kg, operation weight: 22,000 kg, Husmann HL2 1622/2 Twin Shaft Shredder/Crusher/Reducer • Gearbox defect: No power transmission between the right shaft and the gearbox. • Manufacturer: Husmann • Model: HL2 1622 • Year of manufacture: 2011 • Operating hours: 7,219 h • Power: 354 kW / 481 HP • Engine: CAT C13 Crodpfx Afey I Upis Aed • Hopper dimensions: 2,500 x 6,400 mm • 1,600 x 2,260 mm, covered with cutter shafts • 16 to 64 blades • Blade width: 50 mm • Bolt-on cutter blades • Shaft diameter: 660 mm • Shaft length: 2,260 mm • Overall length: 10,200 mm • Width: 2,500 mm • Height: 2,650 mm • Feed height: 2,650 mm • Total weight: 22,000 kg • German machine • This offer is not binding and is subject to prior sale. - Subject to prior sale, - Errors and/or typos excepted. - Sale according to our terms and conditions.

Condition: used, functionality: fully functional, This listing is for a used “Xerox Versant 180 Press” color production system Items included: 1 x Xerox Versant 180 Press with the following features: Includes Fiery E300-5 Includes Paper Deck A-CF01/A-GW03 Includes Booklet Finisher A-FN13 Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Cjdpfx Aoza A Eusf Asrd Meter readings: Total: Approx. 729,330 pages Color: Approx. 505,865 pages Black: Approx. 223,465 pages Condition: This is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: good (used), Morgana FSN Automatic Numbering Machine Functions: Numbering, perforating, creasing, cutting, and scoring. Technical specifications: Speed: 9000 sheets/h Up to 5 perforating knives Up to 8 numbering heads Adjustable pressure Pneumatic sheet feed (identical to a folding machine) Continuous bottom feed with non-stop operation Possibility to adjust the numbering machine’s position relative to the sheet from the control panel Weight: 160 kg Power supply: 230 V Cedpfszdaykjx Af Asrd The set includes two numbering machines, an instruction manual, and tools.

Condition: good (used), Superfax PF-460 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 315×432 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Codpfx Aszdax Tef Asrd Power supply: 230V Weight: 34kg Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound signal when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: good (used), Horizon PF-40L Automatic Folding Machine Machine in perfect condition, currently in production. Manufactured in 2022, the machine was stored in a bank and has not been in production. Compact external dimensions, mounted on wheels for easy movement. Automatic machine setup from the control panel, high-stack feeding, extended feeding. Technical specifications: Maximum format: 320x630mm Min. format: 125x128mm Codpfxezdaxgj Af Ajrd Basic weight: 40-160gsm Speed: 23,000 pcs/h 2 parallel cassettes 230V power supply Electrically controlled delivery Counter with batching function Smooth speed and feed adjustment High-stack feeding Sound-insulating on all units and cassettes Full documentation

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Crodpfx Ajzdau Ujf Ajd Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Cedpfx Aszdat Rsf Ajrd Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Cjdpfxozdatqe Af Aord Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Cedpsyludmjfx Af Asrd Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. Crjdpfx Aeq Nyuvef Aed 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. Cjdpfx Afsq Ngb Do Aord 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Crjdpfx Ajtx T Tyof Asd

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. Crodpfx Afjy Umiue Aod A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm programmer Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Crjdszarw Hepfx Af Asd Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Crodpfx Ajzarv Nef Ajd Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Csdsd H Hmhepfx Af Asrd Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Crsdpjx Eg Upjfx Af Ajd

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. Crsdpfx Afsy Hi D Se Ajd All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2003, pressure 400 t Csdpfxevzxpue Af Asrd distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Fiery NX Pro Server (EX 280) Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Crodpfozb Aivsx Af Asd Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t Cedpfxotndu Uj Af Aord LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Crsdpfx Afjzca Uxo Aod