Used Hydrap Hydraulic Straight Sided Press for sale (38,263)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Iodpfewva I Hox Aqpjtg Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Itedpfx Aqovq Rtkopeg Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Itedorzfh Hepfx Aqpog Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 Isdpfx Aqodzp Tcspotg pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Iedpfxjyr D R Nj Aqpstg Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Itodpfx Asyrr Rksqpsg Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: new, pressure 180 t stroke 400 mm Iedpfx Aqjyv I S Hopjtg column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Itodpfxeudph Ij Aqpjg

Condition: excellent (used), I sell a Lukas baler in very good condition. Itjdpfx Aqjum Htzspog

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s Iodpfsvzxphox Aqpstg working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm Isdpfxey Rur Ne Aqpotg table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1978, pressure 40 t stroke 8 - 50 mm no. of strokes 50 - 300 /min distance between columns 600 mm dayligth (stroke and adjustment up) 285 mm column travel -side 280 mm table surface area 590 x 500 mm hole in the table 590 x 40 - 100 mm Iedpfx Asy Rurcoqpotg table height over floor 860 mm ram surface 590 x 380 mm ram adjustment 80 mm material width 200 mm material thickness - 2,5 mm feed length 160 mm power requirement 7,5 kW dimensions of the machine ca. 1,8 x 1,2 x 2,1 mxmxm AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s Isdoyx Ihyepfx Aqpotg working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work Itedpfx Ajylzw Hjqpjg free loaded to truck

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm Isdpfxowvva Se Aqpetg throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm Itodpjwc U Nlefx Aqpsg power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm Isdpfov Svbcsx Aqpotg table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s Ijdpfevzxp Ujx Aqpstg feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m Itodevuugcjpfx Aqpeg ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm Isdpfxjvuufle Aqpetg table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t Itodpfxovuucwo Aqpeg required space 2,8 x 2,5 x 4,4 m with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication, Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm Itjdpfx Aevuucksqpsg table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm Iedpfx Aovuubyeqpotg table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t Iedpfx Aevuubajqpetg required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm Itodpfjvuua Njx Aqpeg no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800