30 Ton x 1270 mm NC Hydraulic Press Brake

CRONOSSTECH HPB NC 30-1270

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Hodpevdrx Ujfx Afljfk Accessories: - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin removable, electrically secured - control panel on the substructure - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t Hedpeu Dbvtjfx Aflefk dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light Hsdpsra Rrhefx Aflefk new control in 2003: Cybelec DNC 1200

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec Hjdpfx Aoxab Erefljfk working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 Hfjdpfxjtwb U Aj Afljk for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Hfsdeqrr A Rjpfx Aflek

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900 Hfedpfx Aoym Rl Noflek

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Hfodpfjx Npiyox Aflsk Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Hodpfxjulku Hs Aflsfk

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW Hjdex Ik D Aopfx Aflefk oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram