Used Isserstedt Dial Gauge for sale (2,208)

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management Lsdswhdhuopfx An Ijad TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Concrete and fireclay baking plate Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Large stainless steel handle, insulated plastic handles for safe and ergonomic handling The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Ledpfswhdpxex An Ioad Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Weight: 185 kg one floor

Condition: used, Year of construction: 1980, turning diameter over bed 410 mm turning diameter over slide rest 220 mm turning length 1000 mm centre height 205 mm spindle bore 46 mm spindle turning speed range 40 - 2000 U/min total power requirement 22,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light Laodjyt R Iwopfx An Iod - Chuck guard - Chip tray - Chip guard wall - Foot brake

Year of construction: 2000, condition: excellent (used), Mondial Elite Refrigerated Shelf The machine is in very good condition and fully functional Ca. Bj.2000 Mass of the refrigerator W.90cm x H.130cm x D12cm 4 shelves Total dimensions:100cm x 75cm x 200cm With roller blind to protect against cold leakage or heat entry. And lighting. More on request. Cash payment or prepayment. Ledsnbfdlepfx An Isad Sale only to traders , No warranty, no guarantee.

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm turning length 1000 mm turning speeds 40 - 2000 U/min centre height 205 mm spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray Lsdpfxowz Ruzo An Ijad

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 290 mm turning length 900 mm turning diameter in the gap mm turning speeds 40 - 2000 U/min Ljdsvki Efjpfx An Iead centre height 210 mm spindle bore 38 mm total power requirement 4,0 KW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions

Condition: like new (used), Horizontal lathe Diameter above the bed 385mm Distance between centers: 900mm Spindle bore (mm) 51,5 Diam. above the carriage (mm) 220 Ljdpfx Aeg R Sm Ijn Isad Spindle speeds 38 - 1600 (16x) Motor power kW 2.94 Voltage (V) 380 Hertz (Hz) 50

Year of construction: 2010, condition: good (used), 1 x Mondial Forni Dough Divider Model: SV Asda Serial Number: M10SV011 Year: 2010 Lsdpfx Ajtxy Evjn Ioad Located in West Yorkshire, UK UKFM2-5967

Condition: used, power capacity / kW volt / V ampere / A MOOG HY Radial Piston Pump D951 - 2087/D / HPR18A1RKP019SM28B1Z00 / 100086299 / NEW Condition: New & Boxed Laedpfjzlum Tjx An Iod

Condition: new, Hawe RZ11 6/3 radial piston pump, serial number: 3011, complete with operating manual. Used, in good condition, 100% functional. Scope of supply as shown in the photos. Lajdszll Rvspfx An Ijd

Condition: new, MSC DIALOG 6-K . 6309F48, serial number: 0533009.003, unused, 100% functional, scope of delivery as shown in the photos. Laedpfsi Eb S Dsx An Ijd

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good Ledpfxszi A U Te An Iead

Condition: new, Hawe RZ11 6/3 radial piston pump, serial number: 0236, unused, 100% functional, scope of delivery as shown in the photos. Lsdpfx Ajzkc U Nsn Ijad

Condition: new, Hawe RZ11 6/3 radial piston pump, serial number: 4586, complete with operating manual, unused, 100% functional, scope of delivery as shown in the photos. Laodpfszkdaaox An Ijd

Condition: good (used), Year of construction: 2000, center width: 2,000 mm, Control system: SIEMENS 840 D (manual turning) Spindle module replaced in 2008. Swinging diameter over the bed: 630 mm Swinging diameter over the carriage: 370 mm Spindle bore: 105 mm Distance between centers: 2,000 mm Lajdpfxoy A I I Ij An Ied The machine is supplied with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm Spindle speed range 2: 430 - 2500 rpm Power of the main motor: 18.5 kW S6-40%

Condition: good (used), functionality: fully functional, OMGA Radial 700 radial saw Cutting width at 90°: max. 700 mm Lsdpezdy E Esfx An Ijad Cutting height: 125 mm Saw blade diameter: 400 mm Cutting angle adjustment in 3 positions Motor power: 3 kW Machine dimensions: 125 x 130 x 152 cm

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Lajdpjkt S S Nefx An Ijd Availability: In stock Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: new, Hawe RZ11 6/3 radial piston pump, serial number: 3027, complete with operating manual, unused, 100% functional, scope of delivery as shown in the photos. Laedpfx Anjzirpyj Isd

Condition: new, Hawe RZ11 6/3 radial piston pump, serial number: 2211, with operating manual, unused, 100% functional, scope of delivery as shown in the photos. Laedpfozig Rfox An Ijd

Condition: used, 1) 8 pcs. Dialog 4222 with extension display, black, €50/pc. 2) 2 pcs. Dialog 4223 with extension display, black, €70/pc. 3) 2 pcs. Dialog 4223 with extension display, white, €70/pc. Laodpewituasfx An Ied

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Lajdpfx Aozlnpnon Iod Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Ledowa Tc Sopfx An Ioad Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Cutting width at 90° max: 450 mm Maximum cutting height: 80 mm Saw unit adjustable in two planes Lsdpfx Aeyzp Dnen Ijad Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Ledpfxsyym Afs An Ioad Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit

Condition: new, IBO ARL 325.00 PR50 axial-radial bearing, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ljdji Ea T Uopfx An Ioad