Used Jensen Gasket for sale (158)

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM Lrodow Dy Hljpfx Ai Hjr - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Ledpfovgurcsx Ai Herr Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide Description : !!! Horizontal Cabinet is not included in the offer !!! Only the top freeer / refrigerator !!! AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Lrodpfx Asrhwulji Hor Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: used, Filterplate 600x600 stainless steel Ljdjxytulopfx Ai Hjrr Material: AISI 304 13mm complete with screws 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763

Condition: used, Year of construction: 2005, 2005 | Iveco Trakker AD410T44 8×4 | Used Tipper Truck | 395935 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 45 inspection points 40 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall and operating condition. See detail below. Technical checks up to date until February 5, 2027. 13-liter engine with high torque, the gearbox works very well. Disc brakes on axles 1 and 2 (good condition) and drum brakes on axles 3 and 4. Trailer socket for signaling and ABS (no brake handles, GTWR 40T). The vehicle is first-hand with a complete history. Recent repairs: cylinder head gasket, flywheel, and clutch kit at 394360 km; gear linkage and steering ball joints at 373171 km; starter at 383861 km; axles and bushings for pivots on axles 1 and 2 at 297850 km. Gearbox overhaul at about 250000 km. Round dump body length 5800 mm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40818 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Lrodjzrm Dkjpfx Ai Hjr ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Lredpfxov Aad Aj Ai Her Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, FOOD-GRADE BAG EMPTYING HOPPER Upward-opening vertical door Transparent plexiglass inspection window Food-grade EPDM door gasket Round tubular handles Removable grid – 5 mm thickness, 20x20 mm mesh size 3 suction pipes Ø60 mm with reduction to Ø50 mm, adjustable suction flow rate as specified Connection for level sensor G1"1/2 (positioned in the last third) Lsdpfx Aijw Sddis Horr Completely manufactured in AISI 304 stainless steel Total weight: 230 kg Internally polished finish

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Lrjdpjym Uclefx Ai Hsr Also available with alternative agitator types and in other sizes. Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top -2x push handles -1x type plate Agitator: Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3-phase 400 V

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 1x VDL HT350 rotary valve without drive (with drive available at extra cost). Ledpfx Aisvpg Axj Horr These are new and have never been used; manuals and flange gasket are included as new. The valves are supplied without drive. Size: DN350 Housing: Painted cast iron Rotor: Stainless steel with rubber blades Bearings: External slide bearings At 100% fill, 10 liters per revolution.

Condition: good (used), Attention! Please do not use the pre-formulated inquiry field provided by Machineseeker; instead, enter your own questions in this field. Kindly fill out the inquiry field yourself. Only then will you receive a response. Used container unit, dry and leak-proof, requires cleaning. - Consists of 4 x 20-foot containers = approx. 60 m² Ledpjvx A U Ajfx Ai Horr Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Insulation: Roof: 100 mm Wall: 100 mm Floor: 100 mm Equipment: - Entrance door - 2x electric roller shutters - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Sealing gaskets - Wall cladding - Ceiling cladding - Threshold plates - Container clamps The unit is disassembled and ready for collection. Loading and transportation can be organized. Only serious and legitimate inquiries, including your name, email address, and telephone number, will be responded to.

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Ledpjr A Dm Iofx Ai Hjrr Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Condition: ready for operation (used), functionality: fully functional, warranty duration: 6 months, Price availble for below configuration : Top Freezer AHT Kinley or Epta 250 combined with not-refurbished horizontal cabinet AHT Miami, but tested and complete grid system inside (shelves and dividers), glass lid seals changed Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Ledpfx Ajrhwuwoi Hsrr Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Ledsx Dkx Njpfx Ai Hsrr Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Condition: used, Year of construction: 1985, machine/vehicle number: R88, Used COBERT filling machine for wineTechnical Specifications & Performance DataThis Cobert SUPREMA is an isobaric filling machine engineered for precise counter-pressure filling of wine. With 24 filling valves, it achieves consistent product levels and preserves carbonation and quality in both still and sparkling products. The machine architecture supports industrial packaging environments where accuracy, hygiene, and repeatability are essential for beverage production.Manufacturer: CobertModel: SUPREMAYear: 1985Speed: 3000 BPH Machine type: Isobaric filling machineFilling technology: Isobaric (counter-pressure)No. of filling valves: 24Products: Still wine, semi-sparkling wine, sparkling wineContainers: Glass bottlesLine context: Suitable for integration in a used bottling line and second hand beverage production setupsAdvanced Automation & Control SystemsThe isobaric system pressurizes each bottle prior to liquid dosing, enabling controlled product transfer and stable filling even with carbonated wines. Valve sequencing provides reliable start/stop phases, while pressure equalization safeguards product integrity. The machine supports standard operator controls for setup and monitoring, aligning with established bottling equipment practices for safe and repeatable operation.Production Line Integration CapabilitiesDesigned for seamless integration into a complete bottling line, the SUPREMA pairs effectively with upstream rinsing machines and downstream cappers, capsule application, and labeling machines. It handles standard wine bottle geometries and neck finishes commonly found in beverage production. As part of an industrial packaging or beverage production line, it can operate in-line or as a standalone filler with dedicated infeed and outfeed conveyors.Machine Condition & Maintenance HistoryManufactured in 1985, this SUPREMA reflects robust Cobert engineering suitable for long-term service in second hand bottling applications. Preventive maintenance typically focuses on cleaning and sanitation of product-contact parts, routine inspection of seals and gaskets in the isobaric valves, verification of pressure settings, and calibration of fill levels to ensure consistent performance.Operational Performance & VersatilityThe isobaric filling principle enables gentle handling of sparkling and semi-sparkling wines by matching internal bottle pressure, minimizing foaming and preserving dissolved CO2. For still wines, the controlled filling cycle supports steady flow and stable levels. Its 24-valve configuration balances throughput with careful product handling, making it a versatile choice for wineries upgrading or expanding a used bottling line with proven filling technology.Installation Requirements & Site PreparationInstallation follows standard bottling equipment practices: stable, level flooring for accurate alignment; access for cleaning and service; and suitable utilities such as electrical power, compressed air for actuators, and process water for sanitation. Prop... Lredpfx Aiezcf I Rs Her

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 3 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 1,850 mm, total width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) Lsdpfx Ajrhwt Sei Hjrr - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Year of construction: 2011, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank with a 70 l/min pump installed in a lockable pump cabinet. Quantity: 1 Lodpfscnik Ssx Ai Horr Used; fully refurbished – the tank has been cleaned, reconditioned, primed, and painted. Color: Painted in RAL color… according to your color preference. Material: Steel, grade S235JRG2. Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate. Tank for above-ground installation. Shape: Cylindrical, mounted on 2 saddle supports. Tank dimensions: Length: approx. 5,350 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Dome 500 mm with dome cover, screws, and gasket. -Filling pipe 2” with TW closure (filling cap) -Suction pipe 1 ¼” -Dipstick and dipstick closure – tank level indicator -Vent stub with cap 1 ½” -Limit switch with type approval -Leak detector (optical) = LAS with leak detection fluid -Access ladder for side mounting, supplied separately Tank installation suitable for locations outside earthquake/flood zones. Diesel pump 70 l/min including particle filter, on/off switch, and tank key. All installed in a lockable pump cabinet. Simple pump with a total counter. Dispensing hose 4 m (extendable) Motor: 0.5 kW, 230 V, 4.2 A Installed with: Pipelines with ball valve, non-return valve, and tank mounting. Excellent offer! Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Our systems can be inspected at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. The price for the tank system is valid ex works Warstein, loaded. Delivery can be offered at an additional cost. Delivery time: short-term. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally drain, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 2,500 mm, total width: 850 mm, overall weight: 155 kg, inner dimension width: 733 mm, inner dimension length: 2,343 mm, tank capacity: 753 l, energy consumption: 5 kWh, power: 50 kW (67.98 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: Lrjdpfsrhwrbjx Ai Hor - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Year of construction: 1991, condition: used, Technical details: drive power: 0,16 kW feed pressure: 11 bar liter capacity: 250 l total power requirement: 2,8 kw Piston Compressor with Air Pressure Tank Condition: Cylinder head gasket and steel blade defective. The piston is ok. As a spare part donor! Lsdpfsu Nzxrsx Ai Horr On sale as is! *

Year of construction: 2017, operating hours: 29,187 h, condition: not inspected (used), functionality: unexamined, total length: 20,000 mm, machine/vehicle number: 46236, Submission of a bid obligates the buyer to collect the equipment by 26.09.2025. Dismantling will require at least one week! Up for auction is a comprehensively equipped dip coating system with extensive accessories! No minimum price - guaranteed sale to the highest bidder! The system is divided into 16 stations. The following components are included in the offer: - FISA CCB 40 UV - FISA RB 50 (2 units, serial no. 49052) - 5 tanks - Buffer and coating area - Heraeus UV light system - DYMAX Blue Wave 200 - EuroChiller air filter package - Pre-filters (2 units) - Absolute filter - Modular product carriers - Loading tables - Racks for Kanban consumable dispensers - Liquid filter package - Stainless steel frame Additional equipment: - Various spare parts (filters, replacement pump, hoses, gaskets) - Numerous connectors, inspection windows, maintenance openings, rinse pumps, circulation units MACHINE DETAILS Dimensions: - Total length: approx. 20 m Operating hours: 29,187 h Lredsxbyc Sjpfx Ai Hjr Note: The machine has not been tested by the seller but was in use until recently. Further information about the system can be found in the attached documents.

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Lrodocl Sb Ropfx Ai Hor Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Lredpfox Nuftsx Ai Hor Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Lredpox Nugdefx Ai Hjr Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, mileage: 500 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space volume: 18 m³, loading space length: 5,300 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 41.480 8x4 EURO6e GSR Retarder with Meiller Rear Tipper P436 Halfpipe 18m³ and Electric Tarpaulin First Registration: Unregistered Year of Manufacture: 2026 Mileage: 500 km Color: MAN Pure White RAL 9010 Technical Data * Power: 353 kW * Horsepower: 480 HP * Front tires: 315/80R22.5 (steer) * Rear tires: 315/80R22.5 (traction) * Gross vehicle weight: 41,000 kg * Odometer: 500 km * Emission standard: Euro 6E * Transmission: Automatic * Condition: New vehicle Chassis Equipment * Upright exhaust silencer on chassis, right behind cab * 400L fuel tank + 35L AdBlue * EBS + ABS * Disc brakes front axle - drum brakes rear axle * MAN TipMatic 12.28 OD, with retarder 35 * Front axle load: 9,200 kg * Rear axle load: 13,000 kg, hub-reduction axles * Roof hatch * Sun visor * Construction access steps with grab handles on driver's cab roof, driver's side * Headlamp protection with coarse mesh grille * LED daytime running lights Lredjxqu Egjpfx Ai Hjr * Preparation for rotating beacons * Premium driver's seat package, air-sprung, with seat heating * Multifunction steering wheel * Digital tachograph with remote comm. (CONTINENTAL) * Preparation for radio, with CB antenna on driver's cab roof * Automatic climate control (Climatronic) * Central storage box, rear section * GSR General Safety Regulation (mandatory package for EU registration) * ESP + ASR * Cruise control * Emergency brake assist EBA Plus and turn assist * Driver attention warning system (MAN AttentionGuard, non-switchable) * Traffic sign recognition * Reverse camera * MAN Advanced Media System Navigation 7" + sound system * Smartphone integration * Tow coupling on rear cross member, RINGFEDER type 6451 * 2-line trailer brake couplings, rear frame, center, standard coupling * Trailer socket, rear frame, 24V, 7-pin + ABS Body Equipment * Meiller Halfpipe Rear Tipper P436, steel, 18 m³ * Volume: 18 m³ * Electric Meiller sliding tarpaulin * Tarpaulin color: RAL 9006 white aluminum * Floor: 8mm Hardox 450 * Tipper body length: 5,300mm * Tipper body width: 2,300mm * Side wall height: 1,600mm * Front wall: 5mm Hardox 450 * Side walls: 5mm Hardox 450 * Rear wall: 5mm Hardox 450 * External slanted pendulum rear wall with clamp lock * Toggle fasteners * All-round rubber gasket on rear wall * Access ladder with folding lower section on front wall, left * Manually folding underrun protection * Aluminum fenders over both rear axles with foldable and removable mud flaps * Height-adjustable rear light brackets * Upper rear light covers in steel * Vehicle outline marking on cab and body (contour line as per regulations) This translation uses truck industry and agricultural machinery terminology to ensure full accuracy for listings on platforms such as Machineseeker and TruckScout24.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: Lsdpsy Ii Dzjfx Ai Horr EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Lsdpfxjx Nufmj Ai Horr Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side