Used Karl Klink Rsi 16 X 1250 for sale (67,816)

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Psdpjy H Iruefx Andopw Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 Ppsdpfx Aouugi Sondjw equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 Podpfx Aot E Rntsndspw equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ppjdpfxjkwcdbj Andow

Condition: used, Year of construction: 1991, -1- used deflection roller/drive roller, drum length approx. 1250 mm, drum diameter approx. 800 mm, total shaft length approx. 2000 mm, shaft diameter approx. 123 mm, year not known to us. Both bearings can be turned easily. Price EXW Ppjdpfx Answqfz Ujdow

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Ppjdpfx Anjp R Ircsdow Press force: 600 kN Weight: 4000 kg Power: 10 KW

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed Ppodohv A A Depfx Andjw - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers Ppedpsv Hzqxsfx Andsw - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: like new (used), Compact pump unit with an LP-type pneumatic hydraulic pump. P max= 590 bar Pedoy Uh Tzspfx Andspw Application: Hydraulic control Width: 200 mm Height: 360 mm Depth: 255 mm Weight: 12.1 kg Condition: Like new

Condition: good (used), functionality: fully functional, FOR SALE: Darley GS 3100 x 16 – Heavy-Duty Hydraulic Guillotine Shear Looking for a powerhouse for heavy plate shearing? Available is a high-quality hydraulic shear from the Dutch specialist Darley. This machine is built for demanding industrial environments and offers exceptional cutting capacity. TECHNICAL SPECIFICATIONS • Model: Darley GS 3100 x 16 • Year of Manufacture: 1989 • Max Cutting Length: 3100 mm • Max Plate Thickness: 16 mm (steel 450 N/mm²) • Cutting Angle: 2° • Motor Power: 22 kW • Machine Weight: Approx. 12,000 kg • Hydraulics: Ppjdpfx Anoy Rvdajdew 400 L tank, 30 MPa max pressure • Voltage: 380 V KEY BENEFITS • High Capacity: A 16 mm cutting thickness over 3 meters is a rare and highly sought-after feature. • Stability: The 12-ton mass ensures vibration-free and precise cutting even under heavy loads. • Reliability: Darley machines are famous for their over-engineered structures, making them extremely durable for long-term industrial use. An excellent choice for workshops handling heavy plates and requiring absolute operational reliability.

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Ppjdjd Ab Hlspfx Andsw Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Pedpfxevap Tnj Andspw Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Ppjdsy Ia Azjpfx Andow Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information. Machine Benefits Podpfeyaii Hsx Andspw Technical Machine Benefits • Cross cutting aggregate • Cutting length: 1600 mm • Depth cutting aggregate • Cutting length: 5600 mm • Vacuum feeding device – for precise and automated material handling • Outfeed roller conveyor – ensures smooth transfer of cut parts Extra Information Machine still under power

Condition: used, Table dimensions 1250 x 750 mm Podpfx Anexcp Nwodspw

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, total height: 8,000 mm, total length: 6,000 mm, load capacity: 1,250 kg, throat depth: 5,000 mm, working height: 6,900 mm, Konecranes pillar jib crane. Outreach: 500 cm. Height under the jib arm: 750 cm. Load capacity: 1250 kg. Infinitely rotatable. Radio control: Lifting/lowering. Slewing. Hoist travel on the jib. A reduction of height and outreach is possible and permitted. Podpfoy Ecnuex Andopw Transport can be organized. Other sizes of pillar jib cranes of the same design available: 500 kg, 600 cm outreach, 750 cm height. 1600 kg, 500 cm outreach, approx. 700 cm height.

Condition: new, Cesurbend 3-Roll Round Bending Machine MRS 1250 x 140 Technical Specifications: Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness 5.0 mm for pre-bending Roller length 1250 mm Roller diameter 140 mm Weight 1150 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swung out Taper bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking Ppodpfx Anoh Timpodew

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = machining area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 kW laser power Pjdpfx Ansk Ran Eodepw (* Prices vary depending on the configuration and laser power; this is a brand-new laser machine manufactured by us.) Laser machining: simple and highly precise – laser cutting with high speed and quality.

Year of construction: 2025, condition: new, machine/vehicle number: AB2024, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Ppodedvik Nopfx Andsw Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: new, Year of construction: 2026, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Ppedpfx Anjcwph Tsdow Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: new, Year of construction: 2026, SL class = machining area X 1250 mm x Y 2500 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Laser processing easy and high-precision - Laser cutting with high speed and quality Pedpfx Aok Ranzondepw

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Ppedot Eacgjpfx Andjw Price on request.

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Podporckh Sjfx Andspw Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: new, Year of construction: 2025, pressure: 16 bar, steam boiler 6.000 kg x 16 bar new type: Viessmann M75C Ppjdpfx Ansr Ny R Aodjw capacity: 6.000 kg / h max. working pressure: 16 bar with burner connection plate for Weishaupt burner with Economizer produtcion according DIN 12953 available immediately - additional equipment and other sizes or capacities available

Year of construction: 1984, condition: used, 1x Wimag gantry crane Load capacity: 20,000 kg Span: 16 m (adjustable to 12 m in 500 mm increments) Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Radio remote control Ppedeyx Ercepfx Andow Cable reel suitable for 40 m