Used Kikinda D15 - 2600/250 for sale (10,963)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus Ljdpfexk T Efex Agxorp • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg Ljdpozk E A Asfx Agxerp

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, pressing force: 250 t, overall weight: 27,000 kg, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Ledpfezk Ez Eex Agxsrp Press force: 250 tons Bending length: 3,550 mm Frame width: 3,050 mm MACHINE DETAILS Dimensions & Weight Footprint: approx. 4,500 x 2,000 x 3,400 mm Machine weight: approx. 27,000 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Ledpfx Aozlcp Asgxerp -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm -Weight: 25 kg

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 40,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost Lredezibghjpfx Agxop – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, color: other, overall weight: 42,000 kg, Year of construction: 2026, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. Ljdpfx Aeziba Uogxsrp The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, KAESER PREMIUM CAR 250/30 reciprocating compressor with a 30L tank Ljdpfx Ajzmwarsgxorp Technical specifications: power supply - 230 V motor power 1.25 kW effective capacity: 250 l/min maximum pressure 10 bar compressor in perfect working order net price: 1900 PLN gross price: 2337 PLN

Condition: used, Automatic Grinder Manufacturer: Seydelmann Lrodpfx Agsukgzysxsp Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Lrsdpjukg Dnsfx Agxsp Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: used, Tumbler Iglu Scheid with cooling Volume: 250 liters Lsdpfx Asn Nw R Rsgxerp Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Condition: used, Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Lsdpslawp Ssfx Agxjrp Delivery time: 30 days after advanced payment

Condition: used, Bowl Volume: 250 liters Maximum Batch Capacity: Up to approx. 200 kg Installed Power: 5.5 kW – 8.5 kW Construction: Heavy-duty stainless steel (inox), robust industrial design Ledpoylnv Asfx Agxerp Application: Designed for homogeneous blending of various meat formulations while preserving product structure and particle integrity The Laska ME 250 is recognized for its durability, reliability, and high efficiency in demanding production environments.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Lsdszkthgjpfx Agxerp Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Catalogue number 7248 Lrsdpfx Agezh H A Eoxsp TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Lsdpjxdnn Iofx Agxerp Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: used, mileage: 1,28,373 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,050 kg, first registration: 10/2015, next inspection (TÜV): 05/2028, fuel consumption (urban): 7.5 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 6.6 l/100km, CO₂ emissions: 174 g/km, emission class: euro6, energy efficiency: B, color: grey, suspension: steel, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, LG2 LED Intelligent Light System, Q50 Trailer coupling, ball head, detachable, EG9 Garmin MAP PILOT, FR8 Reversing camera, T55 Electric operation for sliding door, right, BS1 Brake calipers with Mercedes-Benz lettering, G42 7G-TRONIC PLUS, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, EA1 Audio 20 CD, FC1 Electronic key in chrome finish, JK5 Instrument cluster with color display, LG4 Tail, brake and turn signal lights in LED technology, EZ5 Parking package, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, QA4 Trailer load 2500 kg, T70 Child safety lock on doors in the passenger compartment, T74 Grab handle for entry, UR1 Seat rail system with quick-release mechanism, V33 Carpeting in the rear, HH9 Semi-automatic climate control system TEMPMATIC, V36 Headliner, Y10 First aid kit, MJ8 ECO Start-Stop function, RL8 Light alloy wheels 7 J x 17, MB6 Emission class Euro 6b M/N1 GR. II, ES2 12 V socket in trunk / cargo area, VD5 Interior headliner crystal gray, H00 Warm air duct to the passenger compartment, MS1 TEMPOMAT (cruise control), F48 Heater for windshield washer system, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Rear window that can be opened separately, US5 3-seater comfort bench EASY-ENTRY in 2nd row in the rear, V44 Carpeting in the vehicle interior, front, RM4 Comfort tires, US7 Comfort seat in 1st row in the rear, right, US6 Comfort seat in 1st row in the rear, left, Z42 Approved as a passenger car, LA2 Headlamp assistant, RM7 Summer tires, HZ0 Auxiliary heater, electric, D14 Roof rails, anodized, E34 Buffer battery for starting, We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork has been carried out on the vehicle as part of the preparation. No liability for printing and spelling errors. Subject to change and prior sale... more on our website. Lredpfezn Sa Asx Agxjp

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor Lrsdpjzk N R Rsfx Agxjp - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Year of construction: 1998, condition: used, Second-hand machine Lsdpfx Agozk Nyfexsrp Year of manufacture: 1998 Features and technical specifications: - Max. operating pressure: 10 bar - Compressed air receiver: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical suction volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1,450 rpm - Oil capacity: 1.2 l - Oil top-up quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Start-up: Direct start Weight 240 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Ledpfx Aet Hwupjgxorp Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: Ljdpfx Agot Hxa Texorp * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, Lsdpfx Ajt Hw Ayegxsrp " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: excellent (used), Control SIEMENS 840D Lrjdpeyrhl Rofx Agxjp

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. Lrjdpot Hwzpefx Agxep * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical data shown on pictures. Ledpfxszk I R Aj Agxerp

Condition: as good as new (ex-display), Heat Exchanger Unit, Air Conditioning Cooler, Condenser, Güntner GCHC Industrial Cooler, Güntner S-GFV065.2A/2-N(EC)-F4/4P-2600, Used Machine Manufacturer: Güntner Type: S-GFV065.2A/2-N(EC)-F4/4P-2600 Year of manufacture: 2017 Lsdsy Udakjpfx Agxerp Internal volume (V): 27.5 liters Maximum operating pressure (PS): 16.0 bar Permissible temperature range (TS): -50 °C / +95 °C Medium state: Liquid (fluid) Test pressure (PT): 17.6 bar (tested with compressed air) Overall dimensions: Width: 3020 mm Depth: 680 mm Height: 1260 mm