Used Koch Cnc Drilling Machine With Inserting for sale (66,655)

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes Ijdpozcmpcefx Aizsaw

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Iaodpfjtvf Htox Aizew - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours Iodpfezl D Awex Aizoaw - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: used, Year of construction: 1999, Machine number: 9114108 Iajdpszd Hntsfx Aizsw Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 8 Iasdpfszmmt Iex Aizew Lateral horizontal groups: yes

Condition: as good as new (ex-display), CNC Engraving Machine, CNC Milling Machine, CNC 3020 Desktop Engraving Machine / Mini CNC Milling Machine – 200 × 300 mm Working Area, Used Machine Manufacturer Engraving Machine Model 3020 Overall Dimensions Width: 400 mm Depth: 530 mm Height: 400 mm Controller Dimensions Width: 290 mm Depth: 325 mm Height: 175 mm Shipping Dimensions 500 × 400 × 390 mm 410 × 345 × 280 mm Technical Specifications Machine Type: Engraving Machine / Mini CNC Milling Machine Model: 3020 Serial Number (SN): 2501053020CZ12-11 Effective Working Travel: X-axis: 200 mm Y-axis: 300 mm Z-axis: 50 mm Power Supply: AC 200–240 V, 50 Hz (operates from a standard 230 V household/workshop power supply) Manufacturer Information Iasdpfx Aiszka R Uozew Manufacturer: Changzhou Huajiang Electrical Co., Ltd. (China) European Importer / Distributor: CNCworld Group Sp. z o.o. (Jednia-Letnisko, Poland) Certifications CE RoHS FCC

Year of construction: 1989, condition: ready for operation (used), CNC Milling Machine Bed Type Mecof MG 88 G Table 6000x1060 mm X-6000 mm Y- 2000 mm Iaedpfxsh H Nd As Aizew Z-1000 mm Control Siemens 828 DSL

Condition: like new (used), Year of construction: 2019, functionality: fully functional, CNC cylindrical grinding machine Lizzini IG-FL Year of manufacture: 2019 Condition: Absolutely like new Control system: Siemens 840D sl Equipment: - 2 external grinding wheels - 1 internal grinding attachment with C-axis and fully controlled B-axis Iasdpfjzmhumex Aizsw Distance between centers: 1000 mm Distance between centers (vertical): 200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. Iaedeh Ek H Sjpfx Aizsw The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Isdpfovwkw Asx Aizeaw Table dimensions: 745 x 460 mm Machine can be viewed under power

Condition: good (used), Year of construction: 1989, bore capacity in steel (diameter) 30 mm throat 300 mm bore stroke 150 mm Iedpfxezmix Hj Aizoaw cross-moving table 600 x 180 total power requirement 1,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 2,2 m

Condition: used, Year of construction: 2013, Storage location: Supplier Iasdpfx Aijzl Ap Nszjw

Condition: excellent (used), Year of construction: 1988, taper MK 5 Ijdpozmixmjfx Aizeaw spindle diameter 60 mm feed ja m/min weight of the machine ca. 1,1 t

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Number of spindles: 35 Iajdpfx Aiozh U Hljzew Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW

Condition: excellent (used), FANUC Power Mate control Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Iaedpfx Aoyla Nueizew Misc. accessories MARCELS MASCHINEN CH

Condition: used, machine/vehicle number: 008439, X axis working area: 3000 mm Y axis working area: 1300 mm Iodjyngzcjpfx Aizsaw Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Iodpfx Asy Nkwrjizsaw Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 5 No of Top Units: 1 Iodpfx Asy Nkyaoizeaw Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Iasdpfx Aisu Tliyjzjw Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Iaodpfxswuckhj Aizjw Total number of drilling spindles: 84

Condition: used, machine/vehicle number: 008557, X axis working area: 3050 mm Y axis working area: 850 mm Iaedpfxezcbhgo Aizow Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm Iaedpfx Aeyhbhwoizjw No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Iodpfxey Nkmmo Aizjaw Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Iaedpfx Aisu N Skfezow Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm Max. panel length: 800 mm Iajdpfxswimzyj Aizew No of Bottom Units: 5 Lateral horizontal groups: yes