Used Krupp Screening Machine Krupp 16/70-2 for sale (1,16,084)

Condition: used, mileage: 31,923 km, power: 150 kW (203.94 HP), first registration: 03/1990, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 3,700 mm, loading space width: 2,480 mm, loading space height: 1,750 mm, Year of construction: 1989, Equipment: ABS, all wheel drive, 1200L water tank +++Quick attack rear right with jet pipe 6-cylinder inline diesel engine with turbocharger and intercooler, 6-speed manual transmission 4x4 all-wheel drive with selectable low-range gear Iaedpfjwfbhajx Alzsr ABS, fog lights 2x differential locks: center and rear (rear axle + transfer case) 1x auxiliary drive: 1x for the rear FP16/8 pump Very well-maintained fire engine with Ziegler body Ziegler 16/8 rear pump with quick attack rear right 9 registered seats, 2 prepared for breathing apparatus wearers GVW: 12,000 kg according to documents Exterior dimensions: 3,700 x 2,480 x 1,750 (L x W x H in mm) Interior dimensions of rear cab (from driver's seat): 1,700 x 2,000 x 1,540 (L x W x H in mm) Wheelbase (Wheelbase): 3640 mm Tires: 9 R x 22.5 Maximum speed: 90 km/h (GPS) Vehicle runs well and is ready for immediate use. +++ Errors, changes, and prior sale reserved +++ ? 034 ?

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Ijdpfxjya H Nks Alzjar Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,696 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, gearing type: automatic, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,200 mm, Equipment: head guard, lighting, sideshift, trailer coupling, Jungheinrich EFG216 70% TESTED BATTERY with a load capacity of 1600kg. Mast is a duplex mast with full free lift and a lifting height of 3150mm. A SIDE SHIFT is integrated into the forklift. The device is a full service device from Jungheinrich. The hydraulics are tight, customer service done! All work carried out by a specialist dealer! Battery built in 2016. Battery C5 tested by Battery Service Bavaria: Kaptest 70% (See photo documentation of test device) 519/750Ah Technical data: Manufacturer: Jungheinrich Model: EFG216 Year of manufacture: 2016 Load capacity: 1600kg Hours: 5696 Height: 2050mm Fork length: 1200mm Lifting height: 3150mm Mast: Duplex mast with full free lift Side shift Fork adjuster Direction of travel controlled by double pedal Battery 2016 70% remaining capacity 519/750Ah Working lights at the front Working lights at the rear Tires as good as new. Forklift in good condition, UVV inspection possible Iaodpfjwp Sccex Alzer Transport possible VAT can be declared

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts donor! TECHNICAL DETAILS Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Weight: 20,000 kg Engine operating hours: approx. 10,600 h EQUIPMENT Trailer Hopper Magnetic drum for mid-size fraction conveyor Magnetic drum for oversize fraction conveyor Clip-on chute Iajdpjyzznlefx Alzer Hydraulic rear support Direct connection Central lubrication system Generator 50 mm drawbar eye Note: The engine starts but shuts off again after a while. Presumably there is a fuel issue. The generator produces power. The machine is currently not roadworthy as it has been stationary for a long time. Road registration is currently not possible.

Condition: excellent (used), Year of construction: 2011, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Iasdpfx Aljw Idvwszjr Model: KR16-2 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2011 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Isdpeyi Ex Nofx Alzear

Year of construction: 2026, condition: new, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. Iaedpfjyz Ii Njx Alzor • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Weight : 31.000 kg - *The screen angle varies between 18-27°. Iajdpfxoyz Iiij Alzer

Condition: good (used), Year of construction: 2006, full axes on rotary/torque motor Distance between spindles: 600 mm Axis travel (mm): 600/600/500 Rapid traverse speed: 45,000/45,000/45,000 mm/min Iodoyzy Nnspfx Alzear Positioning accuracy: < Number of axes: 4 Controller: Siemens 840D PL Tool interface: HSK 100 Mist filtration: Yes Tools available per spindle: 40 Max tool dimensions: L 420 mm; D 100 mm (250 mm – with free adjacent pocket) 20 kg Machine weight (t): 23 Machine drive: Ball screws Machine spindle has been secured for transport, safety brackets are in position.

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and technical data: with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Iedpfx Aoy Dkhgjlzoar Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Equipment: - disc - heating strip Iaodpfoyzy D Ssx Alzer - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change)

Condition: used, Resonance vibrating screen Screen surface: 5,500 x 1,300 mm with base frame and electric drive Iasdotpgdyjpfx Alzer

Condition: good (used), functionality: fully functional, Screen area: approx. 1,100 x 3,000 mm Iasdsu Dhigopfx Alzsr Upper deck: 40x40mm square mesh screen Lower deck: 4x4mm plastic screens Piping and water spraying on both decks 5.5 kW electric drive Semi-mobile steel construction with access on both sides, bypass platform and railing

Condition: good (used), functionality: fully functional, Single-deck dewatering screen Iaodpfewc T T Ajx Alzjr MAB-Schauenburg 1240 Screening area: 1,200 x 4,000 mm Electric motor 7.5 kW Semi-mobile steel structure with platform and discharge chute

Condition: used, functionality: fully functional, Screening area: approx. 1,200 x 2,400 mm 5.5 kW electric motor Iasdpewm Nfcofx Alzor with piping and water spray nozzles Semi-mobile steel structure with bypass platform

Condition: like new (used), functionality: fully functional, power: 5.5 kW (7.48 HP), As-new, unused single-deck screening machine Iasdpjycq Amjfx Alzjr Screening surface: 1,250 x 2,500 mm 5.5 kW electric drive Steel structure and platform

Condition: good (used), functionality: fully functional, Screening area: 1,250 x 3,000 mm new semi-mobile steel structure with platform and discharge chute Ijdswwr D Aspfx Alzoar with cross conveyor belt 650 mm x 2.2 m

Condition: used, 2½-deck screening machine Iasdpewwr Eyofx Alzsr Screening area: approx. 1,900 x 6,500 mm Without drive (power requirement approx. 18.5 kW)

Condition: used, functionality: fully functional, Single-deck pre-screening machine Screening area: approx. 1,250 x 2,000 mm Driven by two 4 kW unbalanced motors Isdpfxswm Ndxs Alzjar Mounted on a steel structure with discharge chute

Condition: like new (used), Year of construction: 2005, operating hours: 3,847 h, Universal Milling Machine DMU 50 (3+2 Axis Machining) Year of manufacture: 2005 Spindle run time: 1,315 h Control: Heidenhain iTNC 530 Working area (travel): X-axis ..... mm ..... 500 Y-axis ..... mm ..... 450 Z-axis ..... mm ..... 400 C +/- 360° B +110° / -5° Spindle (Power package) Tool holder: SK 40 DIN 69871 Spindle speed: steplessly programmable from 20 - 10,000 rpm Rotary Table Dimensions: D630 x 500 mm T-slot spacing and size/diameter: 63 / 14H7 mm Center bore diameter: 30H6 mm Rapid traverse B and C-axis: 6 revolutions per minute Table rotation: 360 degrees Swivel range: 115 degrees (from -5 to +110 degrees) Table clamping: hydraulic Tool magazine Magazine positions: 16 Max. tool diameter: see tool section Max. tool length from spindle face: 300 mm Max. tool diameter at 8,000 rpm: 130 mm Max. tool diameter at 10,000 rpm: 80 mm Iasdpfoy Dcnrjx Alzsr Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Accessories 3D probe (Heidenhain) Tool holders SK 40 The machine was used for single-part production in prototype manufacturing. The machine is immediately available. Can be inspected under power at the seller's location. Location: Rhein/Main

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,270 mm, total width: 1,100 mm, total height: 1,700 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For over 12 years we have focused on quality, precision and reliability. METAL SLOTTING MACHINE B5016C – STROKE 160 mm METAL SLOTTING MACHINE B5016C Iasdpfsyuc D Tjx Alzor A machine designed for machining various internal and external surfaces, especially keyways. It is widely used in maintenance workshops and tool rooms. Technical Specifications Parameter Specification Maximum ram stroke 160 mm Number of strokes per minute 23 / 32 / 44 / 48 / 67 / 92 Worktable diameter 350 mm Vertical ram adjustment 160 mm Distance from tool holder to column 485 mm Distance from table surface to ram body 320 mm Maximum longitudinal table travel 360 mm Maximum cross table travel 320 mm Maximum table rotation angle 360° Maximum tool size 25 × 40 mm Maximum table load 300 kg Maximum slotting force 4.5 kN T-slot width in worktable 14 mm Main motor power 1.5 kW Overall dimensions (L × W × H) 1270 × 1100 × 1700 mm Weight 1400 kg Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, roller (top) diameter: 60 mm, roller length: 1,250 mm, sheet thickness (max.): 2 mm, overall weight: 240 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,180 mm, A sheet metal rolling machine designed for forming pipes, cylinders, and other rounded metal elements. The machine is equipped with rollers driven by a manual lever and gear transmission, ensuring smooth and precise operation. The three-roller system allows convenient pre-bending of the material. The removable upper roller makes it easy to remove finished workpieces. The stable and heavy construction of the machine ensures safe operation during use. The product is made from high-quality materials and manufactured using modern technological solutions, ensuring safety, operational reliability, durability, and resistance to heavy-duty work. Technical specifications Roller length: 1250 mm Maximum sheet thickness: 2 mm Roller diameter: 60 mm Dimensions: 1750 × 650 × 1180 mm Weight: 240 kg Ijdpfjytf Dyex Alzoar Sales conditions The machine is brand new 12-month warranty Warranty service Post-warranty service Delivery to the customer is available. The delivery cost is determined individually based on the quotation provided by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 2026, functionality: fully functional, year of last overhaul: 2008, STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Overhauled For sale: Stork RD-IV textile rotary printing machine in good working condition. Machine details: For Immediate Sale Make: Stork Model/Type: RD-IV Iodey A S Ryepfx Alzear Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. For more information, technical details, photos, or inspection arrangements, please get in touch. Must be moved immediately.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, total length: 5,050 mm, total width: 5,050 mm, total height: 1,850 mm, compressed air connection: 8 bar, type of input current: three-phase, year of last overhaul: 2025, overall weight: 2,100 kg, power: 2.5 kW (3.40 HP), MHM Synchroprint 3000 (2004) – 8/10 – 3 Flash Cure Units – Fully Refurbished – Excellent Condition Iaodpfx Aoy A Eu Eelzjr Automatic screen printing press with 8 print heads and 10 pallets, suitable for large format printing, capable of printing up to 70x100 cm (27.5 x 40 in) with each head. Stored unused for approximately 8 years after being purchased as new, with only 500,000 prints completed. Exceptionally well-maintained, regularly cleaned and lubricated, operated in a pristine environment. In addition, the press underwent a complete overhaul and refurbishment by a certified MHM technician last year. New components were installed where necessary, including air hoses and electrical wiring, ensuring it operates like a new machine. Since refurbishment, only 10,000 prints have been made. Indexing, print heads, touchscreen controls, and all other functions operate flawlessly. (Additional videos available upon request) • 8 colours / 10 stations • Fully refurbished • All print heads in perfect condition • Includes: • 3 flash cure units • 2 sets of MHM honeycomb pallets (50x100 cm, 75x120 cm) • 3 sets of squeegees and floodbars (37 cm, 50 cm, 70 cm) • 80 aluminium screens with mesh (various sizes) • Machine can be demonstrated in production • Location: Serbia (assistance provided with dismantling/loading/shipping) The machine is in perfect working condition and ready for immediate production use.

Condition: used, functionality: fully functional, This listing is for a second-hand DTF/DTG printer, the ‘Brother GTX-423 pro’ Iaedpfey Alulex Alzor Item for sale: 1 x Brother GTX-423 pro with the following features: Includes Schulze KN-800 drying tunnel Includes Schulze Powder Machine 4050 Meter readings: Total: Approx. 4,121 pages Condition: This is a second-hand device, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.