Used Kurt Ehemann V K8 for sale (34,560)

Condition: used, mileage: 90,800 km, power: 335 kW (455.47 HP), first registration: 03/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Meiller three-way tipper with Bordmatik left 41 t variant * Engine version Euro VI D * High Performance Engine Brake * Gearbox oil cooling * Gearbox G230-12/11.7-0.78 * Power Shift 3 gearshift * Offroad driving program * Wheelbase 4550 mm * Gearbox auxiliary drive NA MB 131-2c * Meiller tipper pump type 296/54 * Axle ratio i=4.143 * Tires 315/80R22.5 HA * Tires 385/65 R22.5 VA * Tank 260 L left * VA 7.5 t * RA 13.4 t Leaf springs 16 t * AD Blue 25 L * Exhaust system tailpipe behind the driver's cab pointing upwards * Aluminum fender on RA * Bumper corners made of steel * Bumper center section Towing eye/coupling jaw * Protective plate under bumper * Road paver package * Foldable rear underrun protection * Rear tow coupling * ABS can be switched off * M-cab 2.30 m Classicspace engine tunnel 320mm * Cab mounting height 420 mm * Cab with rear wall windows * Comfort cab storage * Tinted windows * Rain sensor * Light sensor * Step on cab with handrail on roof * Sun visor * Heated mirrors * Central locking system * Radio with Bluetooth and USB connection * Reversing alarm * Steering wheel 500 mm diameter * Comfort driver's suspension seat * Truck Data Center 7 * CB 12 V preparation * Power socket 24V/25A passenger footwell * Construction site filter * Residual heat utilization * Air conditioning * Auxiliary heating hot water auxiliary heating * PPC * Activ Brake Assist 5 * Traffic sign recognition * Lane keeping assistant * Stability control assistant * Rotating beacons prepared * Stone chip protection grille for headlights * MB star illuminated * Storage compartment lid on driver and passenger side * Compressed air connection in driver's cab * LED daytime running lights * Tipper 5800x2380x900 mm Kledpjwm Tcxjfx Afueu * Medium-length protective roof * Lashing recesses in the tipper floor * Side wall height 1000 mm * Bordmatic left * Side wall 4 mm jet version VS 100 * Front rail 1200 mm * Step on tipping bridge * Cover for AGG. * Compressed air horn * and much more * !!! Errors, changes and prior sale reserved !!!

Condition: used, mileage: 90,800 km, power: 335 kW (455.47 HP), first registration: 03/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Meiller three-way tipper with Bordmatik left 41 t variant * Engine version Euro VI D * High Performance Engine Brake * Gearbox oil cooling * Gearbox G230-12/11.7-0.78 * Power Shift 3 gearshift * Offroad driving program * Wheelbase 4550 mm * Gearbox auxiliary drive NA MB 131-2c * Meiller tipper pump type 296/54 * Axle ratio i=4.143 * Tires 315/80R22.5 HA * Tires 385/65 R22.5 VA * Tank 260 L left * VA 7.5 t * RA 13.4 t Leaf springs 16 t * AD Blue 25 L * Exhaust system tailpipe behind the driver's cab pointing upwards * Aluminum fender on RA * Bumper corners made of steel * Bumper center section Towing eye/coupling jaw * Protective plate under bumper * Road paver package * Foldable rear underrun protection * Rear tow coupling * ABS can be switched off * M-cab 2.30 m Classicspace engine tunnel 320mm * Cab mounting height 420 mm * Cab with rear wall windows * Comfort cab storage * Tinted windows * Rain sensor * Light sensor * Step on cab with handrail on roof * Sun visor * Heated mirrors * Central locking system * Radio with Bluetooth and USB connection * Reversing alarm * Steering wheel 500 mm diameter * Comfort driver's suspension seat * Truck Data Center 7 * CB 12 V preparation * Power socket 24V/25A passenger footwell * Construction site filter * Residual heat utilization * Air conditioning * Auxiliary heating hot water auxiliary heating * PPC * Activ Brake Assist 5 * Traffic sign recognition Kledpfx Afswm Tcreusu * Lane keeping assistant * Stability control assistant * Rotating beacons prepared * Stone chip protection grille for headlights * MB star illuminated * Storage compartment lid on driver and passenger side * Compressed air connection in driver's cab * LED daytime running lights * Tipper 5800x2380x900 mm * Medium-length protective roof * Lashing recesses in the tipper floor * Side wall height 1000 mm * Bordmatic left * Side wall 4 mm jet version VS 100 * Front rail 1200 mm * Step on tipping bridge * Cover for AGG. * Compressed air horn * and much more * !!! Errors, changes and prior sale reserved !!!

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Kjdpfopbbmlsx Afuolu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, VC-999 QS8 + VC-999 K8T1A-SP ID.NO. 2922 VC-999 chamber machine with associated VC-999 wrapping machine which has previously been used for large whole cheese blocks. Kljdpfxjv Iz Hvs Afueu Dimensions 480 x 190 cm H 225 cm.

Condition: used, functionality: fully functional, Robust pillar drill from Kurt Siemer (Hamburg-Wilhelmsburg) featuring a Maxion nameplate (Pößneck). Classic German industrial design with a cross slide, swiveling head, and stepped gearbox. The machine was used in a workshop setting and is fully operational. Suitable for locksmiths, repair shops, vocational training workshops, and hobbyists who demand industrial quality. Technical specifications: - Design: Pillar drill, stationary - Drive: Three-phase 400 V - Table: Cross slide / Swiveling table - Spindle mounting: MK (to be checked on-site) - Gearbox: Multi-stage - Brands: Kurt Siemer Werkzeuge, Hamburg-Wilhelmsburg / Maxion (Pößneck) - Weight: approx. 200-400 kg Kjdpfxjzacaxj Afuelu - Year of manufacture: approx. 1960s-1970s Collection / Transport: Self-collection with a forklift / pallet truck. Loading on-site is possible. Shipping by freight forwarder on a pallet can be arranged.

Condition: good (used), Year of construction: 2010, Technical Specifications Kjdpfx Afsxfly Djuolu Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2020, Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp, Loading system including 2 loading mandrels Ø 32 mm, Oil conversion including aerosol extinguishing generator and oil conversion kit, Control cabinet cooling unit, Automatic central lubrication, Marx VTG 0.32 electrostatic mist extractor, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit, Software for all standard curved and pointed teeth, Signal light to indicate operating status, Automatic switching of peripheral speed between CBN and DIA grinding wheels, F-1477 saw blade holder for saws, Various spacers for 32, 40, and 50 mm mandrels, Oil collecting pan. Saw diameter max: (40) 130 - 850 mm Saw diameter (unmanned): (75) 130-520 mm Tooth pitch: 1 - 40 mm Tooth height: max. 17 mm Number of teeth: 2 - 998 Kljdpfx Aeyvgc Nefuju Saw blade thickness: up to 8 mm Loading capacity: 40 saw blades Grinding wheel diameter: (CBN or DIA - 14F1) Ø 200 mm Grinding wheel bore: 32 mm Coolant pressure: 6 bar Coolant tank: approx. 300 L Drive power grinding motor: 3 kW Connected load approx.: 6.5 kW (400 V / 50 Hz) 8.9 kVA Weight approx: 2000 kg Dimensions W x D x H approx.: 2400 x 1700 x 2200 mm colour: Grey

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 742 mm, Tested forklift battery for your truck – 48V 6PZS 930AH – DIN A + 1 year warranty + incl. Aquamatic system + incl. end discharge lead & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Linde E 18 – 322-00 Kedpfoy Rntyjx Afuslu Linde E 18 – 386-02 – side battery change Linde E 18 Z – 322-00 Linde E 20 PHL – 335-00 Linde E 20 PHL – 386-00 Linde E 20 PHL – 386-02 Linde V – 5213-00 Linde V – 5213-01 Linde V MODULAR – 5213-00 Linde V MODULAR – 5214-00 Toyota/BT RR-B 8 Common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN A + 1-year warranty + Including Aquamatik (central water filling system) + Including end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity report provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 835 mm Width: 413 mm Height: 784 mm Weight: approx. 760 kg Kjdpfsy Rnlpex Afuolu Suitable for the following models and others: Linde E 18 Z - 322-00 Linde V MODULAR - 5213-00 Still EK 11 Jungheinrich EKS 210 Jungheinrich KMS 100 Toyota 6FBRE14 Paletrans PR17 Common battery sizes available, enquiries welcome. Transport available.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty Kedpoy Rnizefx Afuolu + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Year of construction: 2005, condition: good (used), All parts shown by hand not come. Kedpfx Ajd N I Ezjfuslu VAT not included in price.

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors. Klsdpfxex Dip Hs Afuou

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: Klsdjyz Af Eopfx Afusu The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, for Morse taper: MK 4 Kjdpecftv Ajfx Afujlu includes: test mandrel, storage box

Condition: used, for Morse taper: MK 2 Klsdpfx Afecftvxsuju includes inspection mandrel, storage box.

Condition: good (used), Year of construction: 1998, Bar feeder Breuning IRCO ILS RBK 7212 Technical data: Type: ILS RBK 7212 Year of manufacture: 1998 Connection: 400 V Power: 1 kW Material diameter: approx. Ø 12–72 mm Bar length: up to approx. 720 mm (short bar feeder) Automatic feed Scrap piece ejector present Control panel with controller Accessories: Comprehensive set of guide channels (various diameters) Additional pusher rods Documentation available Various spare parts (see photos) Kjdpfxey Ez Exj Afuelu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Kledpoygud Aofx Afuou Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable around the vacuum lifter by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE Kledpfx Afjytcnvjuou complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. price is for 300 kg lifter 600 kg lifter plus 300 euro 800 kg lifter plus 600 euro =>direct from stock. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Klsdpfx Afstdpa Uousu

Condition: excellent (used), mileage: 3,31,000 km, power: 102 kW (138.68 HP), first registration: 08/1991, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, permissible axle load (axle 1): 3,100 kg, Year of construction: 1991, = Further Options and Equipment = - 5-speed manual transmission - Heated mirrors - Passenger bench seat - Leaf spring suspension - Driver comfort seats - High beam headlights - Speed limiter - Main battery switch - Hydraulic system - Radio/CD player - Beacon lights - Third seat with seatbelts - Power Take-Off (PTO) - Power Take-Off (PTO) = Remarks = PERFECT CONDITION MERCEDES-BENZ 814 ECOLINER (6-CYLINDER) 4x2 FULL STEEL SUSPENSION RECOVERY TRUCK WITH HYDRAULIC RAMPS, WINCH & MANUAL GEARBOX!! 140HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! P.T.O.!! ETC.!! CAR TRANSPORTER BODY: LENGTH x WIDTH x HEIGHT Approx. 5.90 x 2.30 x 0.65 - 1.15m!! HYDRAULIC RAMPS!! WINCH!! PERFECT WORKING & DRIVING CONDITION TRUCK, READY FOR RECOVERY OR CAR / MACHINE TRANSPORT JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE ALSO VISIT OUR WEBSITE; YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Ksdpfx Afow I Haleujlu Technical Information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Transmission: 5-speed manual gearbox Axle configuration Tyre size: 235/75R17.5 Brakes: drum brakes Suspension: leaf spring suspension Front axle: max. axle load: 3,100 kg; steered; tyre tread left: 90%; tyre tread right: 90% Rear axle: twin tires; left inner tread: 90%; left outer tread: 90%; right inner tread: 90%; right outer tread: 90%; single reduction Weights Unladen weight: 4,660 kg Payload: 2,830 kg gross vehicle weight: 7,490 kg Functional Body brand: FALCOM CAR / MACHINE RECOVERY TRUCK WITH WINCH Maximum number of cars: 1 Loading platform height: 100 cm Condition Technical condition: very good Visual condition: very good Further information Please contact Sales Department or Erik Engel for more information.

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included. Klsdoyuyg Sopfx Afusu

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Kedpfsymmtcsx Afuelu Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: used, Combination Folding machine MBO K800.2 SKTL/4 AUT Navigator Falzmaschine / Combination Folding machine MBO K800.2-S-KTL-4 Navigator Baujahr / Year 2007 - Serial-No. 0124999 Rundstapelanleger / Round Pile Feeder Falztyp  4 Taschen - 2 Schwerter - 1 Seitentasche Folding Type 4 Buckles - 2 knives - 1 Side Buckle Schuppenauslahge mit Presswalzen / Stream delivery with integrated pressing MBO ASP 66 - 2 ME  Inklusive Kompressor / Include Compressor Kledsydmfyopfx Afuju Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Kedpol Hx Rdjfx Afuslu

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1565810, overall weight: 301 kg, total length: 1,200 mm, total width: 800 mm, total height: 650 mm, Used Stöber geared motor with Rexroth servo drive. Stöber gearbox. Type K813VNG0320MO40 Performance: Gearbox: n1-2500/min. n2-21/min. Klsdpotp Tbgsfx Afuju Motor power: n.max.4500 min-1 Type: MKD112C-058-KG3-BN For data see type plates / pictures. Quantity: 1 Euro pallet with 1 gearbox. Packaging and loading included.