Used Laue Cleaning Technology Gmbh Htw 800 Basic for sale (87,788)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Ncodpfxey Urtfo Afljw Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Ncedpfewgbcysx Aflow Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: new, Year of construction: 2026, machine/vehicle number: K00626, functionality: fully functional, operating hours: 2 h, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 600 mm, cutting width (max.): 430 mm, control type: manual, actuation type: manual, total height: 2,500 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, BAUER Vertical Band Saw VG 450 L Precision and performance for demanding miter cuts Njdpfx Afsznc Spolocw The BAUER VG 450 L was specifically designed for the precise sawing of steel, stainless steel, aluminum, and other metals. Thanks to its robust machine construction, hydraulic miter adjustment, and intelligent cutting pressure control, it offers the highest cutting quality with simultaneous ease of operation. Whether for individual parts, series production, or workshop use, the VG 450 L impresses with its reliability, precision, and efficient operation.

Condition: like new (used), functionality: fully functional, tank capacity: 120 l, Equipment: CE marking, Autoclave – Kettle type Korimat KA 160 / 2.5, including 2 x insert basket 1/3. Power 9 kW, voltage 3 x 400 V / 50 Hz. Machine completely made of stainless steel. Condition – Like new!!! Ncodpfxszpd Iho Aflew

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: LM0120032, MACHINE FOR CUTTING IRREGULAR SHAPED STONES Nedpfx Afezn Uvyelocw CONTINUOUS OPERATION – MATERIALS THAT CAN BE PROCESSED: STONE AND MARBLE.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a fully automatic hot filling system including a twist-off capping machine. The system was put into operation in 2022, has not been used since 2024, and can be inspected by appointment. Complete line Consisting of 1 filling line 2 NESS mixing tanks 1 labeling machine Original price was €169,000. Brief description: The filling line consists of a 12-station volumetric filling system for hot filling and a fully automatic twist-off capping machine. It is ideal for filling juices, purees, sauces, soups, broths and similar products. Very robust, hygienic construction made of stainless steel, designed for professional continuous operation. Performance data filling system: - Approx. 2,000 bottles per hour - 12-station volumetric filler - Pneumatic solenoid valve for precise flow control - Product thermometer & fill level indicator - Inspection and cleaning cover (steam/spray connection) - Adjustable working height (approx. 950–1100 mm) - Conveyor belt with independent drive - CE-compliant - Dimensions approx. 1650 × 850 × 2250 mm, weight approx. 400 kg Performance data twist-off capping machine: - Fully automatic, stainless steel - Pneumatic, rotating capping head - Adjustable capping pressure (manometer) - Automatic cap feeder with sorting - Independent conveyor belt and collection table - Capacity approx. 1,000–1,200 bottles/hour - Protective cover with safety interlock Ncsdpfx Ajznlideflew Extensions: - Collection rotary tables - Additional pumps & hoses - Bottle and jar stars for additional formats - Sensor against bottle jams - Speed control conveyor belt Condition: Used, well-maintained, from ongoing production. The original purchase cost of the complete line was approx. €90,000. For sale are two Ness cooking tanks GARANT, each with a capacity of 1000 liters, in an electric base version, each including an agitator. The system was put into operation in 2022, has not been used since 2024, and can be inspected by appointment. Brief description: The tanks are impressive due to their absolutely reliable and easily controllable heating via electricity. They are robust, efficient and can be used flexibly. Ideal for cooked sausage, ham or similar production processes. Technical features: - Capacity: 1000 liters per tank - Electric base version - Including agitator - Stainless steel compact construction, self-supporting and waterproof - Can be placed on a floor base or with tank feet on a floor plate Condition: Used, well-maintained, from professional production. The original purchase cost for both tanks including agitator was €48,000. Inspection possible by appointment.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Ncedohx Elfspfx Aflow Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Ncedpfjzmh R Isx Aflow Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm Ncodpfx Afszmhuyoljw * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 Nedpfx Aszmhdhsflocw * Sides: 4 mm, steel S355 * All sheets and profiles welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm * Securing bar * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm Nsdpfx Afszinxqjlscw - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Year of construction: 2025, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Njdpfshl H Iksx Afljcw Inkjet base

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations Ncedoyt H R Uepfx Aflsw • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: excellent (used), For sale: Professional fire pumps PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Germany), model TS 8/8 DIN 14410. ⚙️ Technical Specifications: Model: TS 8/8 DIN 14410 Flow rate: 800 l/min Operating pressure: 8 bar Nominal speed: approx. 2725 rpm Year of manufacture: 2 units – 1993, 32 h, 98 h 1 unit – 1997, 164 h Weight: approx. 162 kg Manufacturer: PFJ GmbH Jöhstadt – Made in Germany 🔧 Technical Condition: Pumps are operational, start and run smoothly Normal signs of use (scratches, scuffs – visible in photos) Used equipment, but in good technical condition Complete as shown in the pictures 📦 Included: Petrol pump Control panel Lighting All components shown in the photos 💡 Applications: Fire brigade / Volunteer fire department Water drainage Industrial and construction works Fire protection systems ℹ️ Additional Information: Price is for 1 unit Possible to purchase the complete set Nodpfoyyxiwox Aflecw Shipping available

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, distance between spindles: 600 mm, number of spindles: 2, number of slots in tool magazine: 80, axle spacing: 600 mm, Equipment: chip conveyor, Schwäbische Werkzeugmaschine GmbH Twin-spindle machining center BA 600-2 Nodpfx Ajzdq Scsfljcw Year of manufacture: Spindle distance: 600 mm Tool interface: 2 x HSK 100, 10,000 rpm The machine is still in production and can be inspected during ongoing production. Various repairs are required. 8-station hydraulic clamping system per tool changer.

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine Ncsdpfeiq Hxkox Afljw H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic punching press HPA, 8 to 60 kN, available upon request. Direct-acting punching press with a pressing force of 17 kN. Pressing force 17 kN. Working stroke 40 mm. Overhang 100 mm. Table size W 300 x D 200 mm. Ram bore 20 mm. Weight 41 kg. Two-hand control panel. Two-hand operation: both buttons must be pressed simultaneously with both hands. Complies with the requirements of EN 574, Class IIIB 1. Nedpfx Aszn Nqfoflocw • Ram with anti-rotation feature. • Simple height adjustment of the press head via a threaded spindle and bevel gear. • Side-mounted measuring tape for quick reproduction of settings when changing tools. • Virtually maintenance-free, double-acting cylinder.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Available immediately – get in and get started right away! 🔥 SUMMER PROMOTION – SPECIAL PRICE ONLY €14,199 net plus VAT 🔥 Are you looking for a reliable, modern, and immediately operational mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with its powerful performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cabin with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – more stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2,000 kg Transport weight: 1,820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket volume: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cabin incl. heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Radio ✔ Comfort seat for long working hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditching bucket ✅ 50 cm deep-digging bucket ✅ 100 cm grading bucket ✅ Hydraulic quick coupler ➡️ Immediately ready for any construction site! ➕ OPTIONAL – AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & GUARANTEE 12 months warranty throughout Europe Spare parts & service directly from the warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery possible on request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our premises. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at the summer price of €14,999 net🔥 Secure this advantage now – the offer is only valid for a limited time! Nodsx Hg D Aopfx Aflscw Inquire now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally!

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Ncedpfszil S Ijx Aflow Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, The LMH-3000 is a state-of-the-art, next-generation 4-in-1 fiber laser welding machine. It combines welding, cutting, brazing, and surface processing in a single system. Building on the proven LMH-1500, the LMH-3000 offers even greater performance and flexibility with its 3,000 W laser source – ideal for working with thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling, and ergonomic handheld operation, this machine is perfectly suited for continuous industrial 24/7 use. Technical Data Model: LMH-3000 (4-in-1) Laser source: 3,000 W (Raycus / MaxPhotonics – depending on configuration) Laser type: Fiber laser Functions: Welding, cutting, brazing, surface processing Operating mode: Continuous operation possible Cooling system: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheet metal, and more Energy efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic handheld torch with optional wire feeder Advantages - 4-in-1 functionality – versatile applications - Higher output (3,000 W) for maximum welding speed and material thickness - CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards - Clean weld seams with minimal reworking - Robust design for industrial use - Flexible use in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Testing: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Operating and application training can be arranged by appointment. Extras & Accessories - Wire feeder system - Shielding gas solutions - Replacement nozzles and wear parts - Extras & accessories (optional) Ncsdpfxsxc Ec Te Afljw Replacement nozzles and wear parts—Ideal for workshops, mechanical engineering, metalworking, body shops, or maintenance departments. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU guidelines. Delivery includes all required documentation. 📍 Manufacturer / Supplier: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Shipped by freight carrier (on pallets) within Germany and the EU – shipping costs on request. 🧾 Invoice issued with VAT shown separately. ✅ Buy now and have it delivered ready for immediate use!

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Secure yours now: Special offer – discount on all tracked dumpers! The 500S tracked dumper stands for powerful material transport, precise unloading, and reliable technology. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers, or elevated loading areas – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the 500S tracked dumper is perfectly suited for confined construction sites, uneven terrain, and professional continuous operation. Your advantages: ✅ Hydraulic lifting and tilting function 90° for comfortable unloading ✅ Lifting height up to 1,200 mm – ideal for containers and trailers ✅ Powerful Koop 173 diesel engine, 4.0 kW, EU Stage V ✅ High payload of 500 kg with compact external dimensions ✅ Optimal traction thanks to wide tracked chassis ✅ Stable, low-maintenance, and durable design ✅ Ideal for construction, landscaping, municipal services, and agriculture Technical data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Weight: 550 kg Payload: 500 kg Hopper volume: 200 dm³ Hopper dimensions: 1,050 × 730 × 730 mm Lifting and Tilting Function: Maximum lifting height: up to 1,200 mm Tilting height: 1,050 mm Nedeyml D Hjpfx Aflocw Tilting distance: 220 mm Tilting angle: 90° Operation: hydraulic Chassis: Chassis type: tracked chassis Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track width: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions L × W × H: 1,570 × 880 × 1,450 mm Chassis width: 700 mm Application areas: The 500S tracked dumper impresses everywhere where reliability, maneuverability, and lifting performance are required: Construction and civil engineering Gardening and landscaping Municipal services Agriculture Material handling in confined spaces 🔥 CLEARANCE SALE: DISCOUNT ON ALL TRACKED DUMPERS The 500S tracked dumper is immediately available and ready for use. Ideal for those looking for a robust, powerful, and compact transport solution for professional use. Special price with discount: 3,100 € net plus VAT. Location: Rheda-Wiedenbrück Inquire now and secure your price advantage! ➡️ The offer is valid for a limited time only and while supplies last.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: KR 210 R2700 prime, Basic data KR 210 R2700 prime Number of axes: 6 Number of controlled axes: 6 Working envelope volume: 55 m³ Pose repeatability (ISO 9283): ± 0.06 mm Approximate weight: 1111 kg Rated payload: 210 kg Maximum reach: 2696 mm Protection rating: IP65 Protection rating, in-line wrist: IP65 Noise level: < 75 dB (A) Mounting position: Floor Footprint: 830 mm x 830 mm Permissible angle of inclination: ≤ 5° Default color: Base frame black (RAL 9005); Moving parts KUKA orange 2567 Controller: KR C4 Transformation name KR C4: KR210R2700 PRIME C4 FLR Hollow shaft diameter: A1 139 mm (partially occupied by motor cables) Humidity class (EN 60204): - Environmental condition classification (EN 60721-3-3): 3K3 Ambient temperature: Operation: 10°C to 55°C (283 K to 328 K) Storage/transport: -40°C to 60°C (233 K to 333 K) Axis data, KR 210 R2700 prime Motion range: A1: ±185° A2: -140° / -5° A3: -120° / 155° Nodpfoyl Ux Dox Aflocw A4: ±350° A5: ±122.5° A6: ±350° Speed with rated payload: A1: 105°/s A2: 107°/s A3: 114°/s A4: 136°/s A5: 129°/s A6: 206°/s Payloads, KR 210 R2700 prime Rated payload: 210 kg Rated mass moment of inertia: 105 kgm² Rated total load: - Rated supplementary load (base frame): - Maximum supplementary load (base frame): - Rated supplementary load (rotating column): - Maximum supplementary load (rotating column): 300 kg Rated supplementary load (link arm): - Maximum supplementary load (link arm): 130 kg Rated supplementary load (arm): 50 kg Maximum supplementary load (arm): 150 kg Nominal distance to load center of gravity: Lxy: 270 mm Lz: 240 mm Exceeding the specified payloads and supplementary loads will reduce the service life of the robot and can overload the motors and gears. It is recommended to always test your specific application with KUKA.Load. If any individual value is exceeded, please consult KUKA Roboter GmbH.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa Nedpfx Afsxt H Hhslocw > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth Nsdpfx Afjzmurrelecw - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable Njdpfx Afowymlyoljcw - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.