Used Mass Ss-M for sale (72,730)

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gearbox, article number 100336738, serial number 2231204-1, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hnsdpsi Eb Ufjfx Ah Set

Condition: new, Renishaw SA26DBA104B30S Resolute FS measuring head, Siemens 26BIT / 104DIA 3.0M M12, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hnodpfx Ahsi Ecm Ns Sot

Condition: ready for operation (used), Siemens 6ES5095-8MB03 compact unit S5-95U with Profibus interface, serial number as shown in the photo, professionally overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Hedpfx Asi Ednpjh Sjnt

Condition: new, AEG Modicon S 975 communication processor for 984, unused, 100% functional. Hnodpfxei D Tu Hs Ah Sjt

Condition: ready for operation (used), Siemens 1FK7042-6AF71-1EG0 Brushless Servomotor, serial number as shown in the photo, used, professionally overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. Hodpfx Asi D Rk Reh Sont

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic measuring head for installation, serial number: O14LW1379, unused, 100% functional, scope of delivery as shown in the photos. Hnjdei D Upvepfx Ah Sjt

Condition: used, Year of construction: 2023, operating hours: 370 h, maximum speed: 40 km/h, front tire size: 650/60 R34 | 0%, rear tire size: 710/75 R42 | 0%, tire size: 710/75 R42, Tyres (front): 650/60 R34, Tyres (rear): 710/75 R42, Operating hours: 370, First registration: 19/12/2024_____Standard equipment/ technical dataEngineRated power (ISO): 176/240 kW/hp at 2,100 rpmMax. power (ISO): 198/270 kW/hp at 1,950 rpmEPM - Max. power (ISO): 221/300 kW/hp at 1,950 rpmMax. torque: 1,220 Nm at 1,500 rpmEPM - Max. torque: 1,300 Nm at 1,500 rpmAGCO Power, STAGE V Hodpfxsvqakxs Ah Ssnt

Condition: new, pressing force: 160 t, V80mm Amada style press brake dies Hnsdpswcxtbofx Ah Sst

Condition: new, Year of construction: 2026, _____Mounting category I+II Working width approx. 3.85 m Swath width approx. 0.70 - 1.55 m Transport width approx. (with tine bars removed) 1.68 m Transport length approx. 2.34 m Rotor diameter 2.96 Number of tine arms per rotor: 10 Number of double tines per arm: 4 Tire size for rotor chassis: 2x 16/6.50-8 Tandem axle Optional accessories Power requirement approx. kW/hp 20/27 Required hydraulic connections: - Height adjustment of rotor: mechanical PTO speed: 540 rpm PTO shaft Overload protection (star ratchet) PTO shaft profile: 1 3/8", 6-piece Warning signs: optional accessory Hedpezgqq Refx Ah Sjnt Lighting: optional accessory Weight approx. 520 kg Special equipment: - Set of warning signs with LED lighting - 1 set of tandem axles with 16/6.50-8 wheels Internal number: 14393 Net price: 6,900.00 EUR Gross price: 8,211.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Mounting category I + II Working width approx. 5.80 - 6.60 m Swath width approx. 1.20 - 1.80 m Transport width approx. 2.75 m Hjdpszgqrbjfx Ah Ssnt Transport height approx. 3.70 m (with tine arms mounted) Transport height approx. 3.18 m (with tine arms dismounted) Transport length approx. 4.66 m Rotor diameter 2.74 m Tine arms per rotor 10/10 Double tines per arm 4 Tire size, rotor chassis 3 x 16/6.50-8 Tire size, transport chassis 10.0/75 - 15.3 Power requirement approx. 19 kW / 26 hp Required hydraulic connections 1 x single-acting Rotor height adjustment mechanical PTO speed rpm 540 Standard PTO shaft included PTO shaft profile 1 3/8", 6-piece Freewheel in the secondary drive included Warning signs included Lighting included Weight approx. 1350 kg Optional equipment: - Individual lifting, electric preselection - Tandem axle with wheels 16/6.50-8 Internal number 14394 Net price: 17,900.00 EUR Gross price: 21,301.00 EUR Location: null

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg Hedpfog Sn Ahex Ah Ssnt

Condition: new, 88 degree press brake punch of amada/promecam style Hnsdsin I D Ejpfx Ah Set R0.8mm, H120mm, L835mm, L835mm segmented

Condition: new, Amada/promecam style Centrical 1V press brake dies Hnodoin I Hrjpfx Ah Sjt

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. Hnodpfx Ajq I N H Neh Sot 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Year of construction: 2023,

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm Hnedjzwt T Aspfx Ah Sst MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: used, operating hours: 148 h, number of beds: 30, Operating hours: 148, initial registration: 02/02/2026. Initial registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Max. power 132/180 kW/hp (ISO 14396). Max. power with power management 155/210 kW/hp. Max. torque 750 Nm, with power management 860 Nm. Registered power 148 kW (ISO 14396). Max. power to the PTO 114/155 kW/hp (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. PowerCore engine air filter with coarse dirt extraction. EasyCare cooler package. 305 liter fuel tank. Hjdpfxszpcu Hj Ah Sjnt

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Hjdpfjzpcvdsx Ah Sent Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: ready for operation (used), Siemens SIM encoder, communication with connecting cable for encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hnodpfxezzhuij Ah Sst

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hnedpezzl Imefx Ah Set

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Hnedpfszmub Tjx Ah Sst

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide, with grating on the ramps. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area slopes towards the rear. Internal loading area width: 2,480 mm. Removable rear overhang. Front design allows for through-loading. Vehicle with temporary registration. Also available with a 5,300 mm loading area length!! Rental price starting from 500 €. Subject to printing errors, errors and changes. Sample images. More details under: ! Hnodpjzzai Eefx Ah Set

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide. Ramps with grating. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area with a sloping rear. Internal loading area width: 2,480 mm. Removable rear ramp. Front opening for through-loading. Vehicle with temporary registration. Hodpfxszzaqie Ah Sjnt Also available with a 5,300 mm loading area length! -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: !

Condition: used, Year of construction: 1999, machine/vehicle number: 17, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Hedezy Ulrjpfx Ah Sent For sale is a vertical internal stripping machine manufactured by FORST, model: RISH 6.3 x 1000xx 320 M. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Control voltage: 230/240 V AC Control frequency: 50 Hz Control current: 6.3 A Machine rated current: 180 A

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Hedpjppgcyofx Ah Sjnt Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on