Used Meadow Mower for sale (176)

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 1,59,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle – additional charge €11,500 for Mulag attachments * From first owner * Condition as per photos * Only 8,682 original operating hours * Front and rear PTO shafts * Municipal hydraulics at front and rear * Front mower Ijdsvhqbcspfx Acreic * Mulag MRS300 boom * Mulag RMK1200 verge mower head * Rear mower * Mulag MHS800 rear boom * with Mulag MK1200 mower head * Municipal and rear hydraulics * Rear three-point linkage * Mulag MRS 300 verge mowing implement * Ideal for mowing in roadside areas, suitable for both left and right side operation * Front three-point hitch mounting * Reach up to 3.00 m * Powered via front PTO * Electro-hydraulic control * Mower head float * Ground speed-dependent sensing system * RMK 1200 verge mower head * Working width 1,200 mm * Telescopic MHS 800 rear boom mower * Lateral shift 1,600 mm * Left and right reach 8.70 m * Automatic terrain contour following * High-clearance portal for passing obstacles up to 3.90 m * Single-hand control unit with multifunction joystick * Quick-release system * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization monitoring * Comfort cab with two seats * Air conditioning * Front window heating * Outside temperature display * Comfort driver’s suspension seat * Electrically heated mirrors * JCB PowerShift transmission with three powershift stages * Disc brakes * ABS * Differential lock * Warning beacons * Distant warning indicator * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor (agricultural tractor) * Wheelbase: 3,000 mm * Gross vehicle weight: 12,000 kg * LOF registration When selling to commercial customers and for export (EU and non-EU), the German commercial code applies. If desired, we can provide a quote from our partner workshops for a new TüV inspection. Our offer is generally WITHOUT new TüV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misconceptions regarding condition or suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or erroneous statements in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 33,596 Km * Only 5333 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F28B.22 * 1,85m = 995 Kg - 3,10m = 765 Kg - 4,30m = 545 Kg- 5,50m = 395 Kg * Hook height 8 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window Iodsvhqhiepfx Acreic * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,700 kg * Payload: 2,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 78,198 km, power: 107 kW (145.48 HP), first registration: 09/2012, fuel type: diesel, empty load weight: 3,405 kg, maximum load weight: 2,595 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,700 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 1,700 mm, loading space width: 1,650 mm, loading space height: 800 mm, Equipment: additional headlights, air conditioning, all wheel drive, cabin, crane, differential lock, trailer coupling, * German vehicle * 1st hand * See photos for condition * Complete documentation incl. test books and checkbooks available * Only 2,933 operating hours * Three-way tipper with crane behind the driver's cab * Palfinger crane * Type PK 3400 A * Hook height 9m * 5th + 6th control circuit * Grapple control * 2 hydraulic extensions * 2 hydraulic outriggers * 6.40 m = 430 kg. * 4.90 m = 600 kg. * 3.40 m = 870 kg. * Load capacity 990 kg. * Municipal plate with all hydraulic connections * Working plate suitable for various attachments * Various attachments available at extra cost * for example snow blade/ flail mower/ Mulag or Fiedler front boom etc. * Three-way tipper * Tipper length 1.70 m x 1.65 m * Tail lift elevation 0.80 m * DIN lashing eyes * High front wall * Trailer coupling * 3,500 kg towing capacity * Various storage compartments * Cab with air conditioning * Auxiliary heating * 2 air-sprung comfort seats * Heated seats * 5-speed gearbox * Diff locks * Rotating beacons * Wheelbase 2.70 m * GVW. 6,000 kg. * Unladen weight 2,405 kg. * Payload 2,595 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - . Isdpsvhp Tkefx Acreic

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, German vehicle, first owner, LADOG T1400, condition as shown in photos, original mileage of only 33,596 km, only 5,333 operating hours. Three-way tipper with Fassi crane mounted behind the cab, Fassi crane model F28B.22, hook height 8 m. Lifting capacities: 1.85 m = 995 kg, 3.10 m = 765 kg, 4.30 m = 545 kg, 5.50 m = 395 kg. Equipped with 5th and 6th hydraulic control circuits, 2 hydraulic outriggers, height-adjustable municipal work platform with hydraulic connections, four-wheel steering, EasyDrive (hydrostatic drive), 2 trailer hitches, trailer load 3,500 kg. Tipper dimensions: length = 2,100 mm, width = 1,400 mm, height = 300 mm. Aluminum side panels, Dücker UNA 200 flail mower available at extra cost, high bulkhead, power steering, differential lock, 2 comfort seats, roof hatch, rear window, sliding window, municipal lighting and headlights, beacons. Wheelbase: 2,500 mm, gross vehicle weight: 5,000 kg, unladen weight: 2,700 kg, payload: 2,300 kg. If a new TÜV inspection is desired, we would be happy to provide you with an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), without new accident prevention inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: Iiedpsvhqhpjfx Acroc We offer and strongly recommend a viewing and inspection of the equipment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and viewings are possible and expressly desired at any time by appointment. All information provided without liability. No responsibility is taken for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and features of the vehicle/equipment. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2023, operating hours: 349 h, Radio-Controlled Tool Carrier with Forestry Mulcher The Energreen RoboEVO is a radio-controlled tool carrier capable of operating in particularly challenging and hard-to-access terrain, with slopes of up to 55°. It is equipped with a powerful 40 HP diesel engine and two double-acting hydraulic control valves to ensure compatibility with a range of attachments. Key Features: * Radio control range up to 150 m * Optimal maneuverability * Traction in all directions on slopes up to 55° * Special oil sump for secure engine lubrication * Multifunctional operation * High productivity with fast completion of tasks * Superior traction on any substrate Special Equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio control with tilt sensor * PANOLIN HLP SYNTH 46 bio-hydraulic oil * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 1 LED work light * 12-Volt LED beacon with bayonet fitting Attachment: Forestry Mulcher Forestry Head 130T with hydraulic quick couplers "CEJN", rotor with fixed tools and material guide frame. Robust and reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to 10 cm in diameter. Fixed-tool rotor for shredding cut material. TECHNICAL DATA Cutting width: 1,200 mm Oil pressure: 290 bar Number of tools: 32 Oil flow: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also stock additional grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder. Other attachments such as double-blade mowers, verge mowers, and many other implements available on request! Iisdsy E Dt Eopfx Acrjc We are pleased to offer suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always keep a selection of new and used equipment in stock, with additional units available for demonstration. Please contact us! All machines are also available for rent with or without operator. Other notes: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport. * No liability for printing or typographical errors. * Subject to error, prior sale, and change. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: used, Year of construction: 2022, operating hours: 359 h, Radio-controlled tool carrier with grass mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier that can also be used on particularly challenging and hard-to-reach terrains with inclines of up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections, ensuring compatibility with a variety of attachments. Features: * 150 m radio control range * Optimal maneuverability * Ground adherence in all directions up to 55° * Special oil sump for secure engine lubrication * Multifunctional application * High performance, fast completion of work * Excellent traction on any surface Optional equipment: * Hydraulic quick couplings "CEJN" * EU DUAL BAND radio control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator protection * Counterweights, approx. 70 kg * 12 Volt LED beacon with bayonet lock Attachment: Energreen Head 130 with hydraulic quick couplers "CEJN" and hammer flails Robust, reliable mulcher made from Strenx® steel, ideal for cutting grass and shrubs up to 3 cm in diameter. Rotor with hammer flails, adjustable cutting height. Technical data: Ijdpfxoy Eyt Ij Acroic Working width: 1300 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 52 l/min Hydraulic motor: 21 cm3 Weight: 220 kg We also have other grass mulchers, forestry mulchers, brush cutters, and a stump grinder in stock. Additional attachments such as double-blade mowers, boom mowers, and many other implements are available on request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new machines in stock, as well as additional units for demonstration purposes. Contact us! We also rent out all machines with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport. * No liability for printing and typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, Year of construction: 2025, operating hours: 12 h, Radio-controlled implement carrier with forestry mulcher The Energreen RoboEVO is a radio-controlled implement carrier designed for operation in particularly challenging and hard-to-access terrain with inclines up to 55°. It is equipped with a powerful 40-hp diesel engine and two double-acting hydraulic controllers, enabling the use of a variety of attachments. * 150 m radio control range * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Maximum traction on any surface Special equipment: * Hydraulic quick couplings “CEJN” * Dual band EU radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color: Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 2 LED work lights * LED rotating beacon, 12V, with bayonet mount * Hydraulic winch preparation Attachment: Forestry mulcher Forestry Head 130H with hydraulic quick couplings “CEJN”, rotor with hammer flails and material guide frame Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to a diameter of 4 cm. Rotor with flails for shredding chopped material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow rate: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also have other grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Iiedpfx Aov R E Hfjcrsc Additional attachments such as double blade mowers, reach mowers, and many other implements available upon request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, with additional units available for demonstration. Contact us! All machines are also available for rent, with or without operator. Other notes: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport. * No liability for printing or typographical errors. * Errors, changes, and prior sale reserved. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information supplied without guarantee. Additional information: Engine output: 41 hp (30 kW)

Condition: used, Year of construction: 2025, operating hours: 12 h, power: 36 kW (48.95 HP), Radio-Controlled Tool Carrier with Grass Mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier designed for use in particularly challenging and hard-to-reach terrain, with the capability to operate on slopes up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections to enable compatibility with various attachments. Features: * 150 m radio remote control range * Optimal maneuverability * Ground adhesion in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Excellent traction on all surfaces Special equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color orange RAL 2011 / grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 1 LED work light * LED beacon 12 Volt with bayonet fitting Attachment: Energreen Head 155 with hydraulic quick couplers "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades and adjustable cutting height. Technical Specifications: Working width: 1535 mm Oil pressure: 305 bar Number of tools: 30 Oil flow: 55 l/min Hydraulic motor: 21 cm³ Weight: 310 kg We have further grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double-blade mowers, mower arms, and many more are available on request! We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of both used and new machines in stock as well as further units available for demonstration. Feel free to contact us! We also offer all equipment for rent, with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible * Sale price excludes transport Iisdpfjy Ep Hzox Acroc * No liability for typographical or printing errors * Subject to errors, changes, and prior sale * Offer is non-binding * Photos may differ. Price applies to current condition * All information without guarantee Further information Fuel type: Diesel

Condition: used, Used Vehicle * Vehicle No.: - * Mulag Boom Mower MHU 800 Year 2000 * Equipped with mulching head * Driven by hydraulic system * Operated via 2 joystick consoles * Includes 4 support stands * Sale is on behalf of the customer ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or export. Iedpfx Acjup Nw Iorjic The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase. All information/specifications are provided WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each prospective buyer before purchase. Subsequent claims will not be accepted.

Condition: used, mileage: 1,03,000 km, power: 184 kW (250.17 HP), first registration: 02/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, MOBILE ART PRACTICE/ OFFICE !!! DAF CF 75-250 Manual gearbox Air suspension air conditioning hydrl. outriggers Insulated box Iiodpfx Acjt Ex N Serec Toilet with washbasin Waiting room 2 x single rooms Rear meadow Rear entrance and side entrance 3 x air conditioning etc....

Condition: used, mileage: 1,53,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. Iijdpfeyx N Hqjx Acroc The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, power: 28 kW (38.07 HP), Year of construction: 2017, operating hours: 2,200 h, Equipment: air conditioning, all wheel drive, cabin, front linkage, Kubota STW40 28kW/38hp with air conditioning and mowing equipment---- * Air conditioning * Switchable all-wheel drive * Switchable rear axle differential lock * Hydrostatic transmission * Rear lift * Rear hydraulics * Rear PTO shaft 540 or 800 rpm * Front lift with three-point linkage * Front PTO shaft 1000 rpm * Mid-mount PTO shaft * Front hydraulics * Control/joystick for front loader * Rotating beacon * Work lights (front) * Work lights (rear) * Radio with speakers * Driver's seat with air suspension * Cruise control * Hand throttle * Front fenders made of plastic * Heated rear window Ijdsy U Sfzopfx Acrjic * Front windshield wiper with washer system * Mid-mount mower with side discharge * MATEV collection container with suction and high-dumping function ----Ready-to-use vehicle from first owner, tires in new condition! Front mower and snow blade available at an extra cost! Errors and changes excepted!

Condition: used, Year of construction: 2023, Meadow harrow (unused) with a 6-meter working width, hydraulically foldable with additional skids for better gliding. Iiodpfx Acjx Ia T Horec

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Maximum Pressing Length up to 4,500m/m. Semi Automatic Single Sided Finger Joint Milling Unit with Cut off Saw, Scoring Saw & Milling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued section. Show us your mobile number for images on WhatsApp. Can be demo'd working in Sheffield, Yorkshire UK. Iodpfx Aouaf Rdscroic Full documentation available. Photos & Video etc, available on Whats App. Price ex. works, dismantled & loaded buyers transport. NOTE: New Price: Euro 18,000.00 or STG£15,000.00 Plus Vat if applicable

Condition: used, mileage: 1,94,905 km, power: 210 kW (285.52 HP), first registration: 05/2007, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: orange, Year of construction: 2007, Equipment list: * Vario Pilot Iedpfx Ajx R Uwxecrjic * Front mounting plate size 3 * Main battery switch * 12V trailer socket * Large Ringfeder trailer coupling * Hydrostatic drive * Automatic shift * Hydraulic system circuit 2 * Front quick couplers 8+separate return * Rear quick couplers 4+separate return * High-performance hydraulics circuit 3+4 * Front PTO * Additional headlamps * Rear work lights * 2 beacon lights * 2 flashing beacons * Mower door (window defective) Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport * No liability for printing and typographical errors. * Subject to error, change and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information without guarantee. Further information Operating hours: 12,592 General condition: good Serial number: WDB4052011V213048

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 Iiedex R Uw Sspfx Acrsc - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: excellent (used), functionality: fully functional, power: 81 kW (110.13 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 162 l, color: original, overall weight: 11,000 kg, empty load weight: 11,000 kg, operation weight: 11,850 kg, tire size: 650/45R22.5 (331 profiel – op 1 band rechtsvoor na), tire condition: 70 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 06/2017, emission class: euro5, Year of construction: 2017, operating hours: 9,566 h, Equipment: USB port, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hydraulics, lighting, onboard computer, standard shovel, trailer coupling, JCB HYDRADIG 110W AS GOOD AS NEW WITH 3 EXTRA ATTACHMENTS, READY FOR IMMEDIATE USE - 2 x BUCKET (DEMOLITION BUCKET, DITCH CLEANING BUCKET) - 1 x KINSHOFER SORTING GRAB OPTIONAL WITH: - AGRIMASTER FLAIL MOWER - DABEKAUSEN HEDGE TRIMMER OCTOBER 2025: - 500-hour inspection - Relay fault resolved - Machine runs perfectly Engine - JCB Ecomax 444 Tier4Final - Without particulate filter, with AdBlue - Power: 81 kW 109 HP - Water-cooled, turbocharged, common rail injection - Dry air filter, start/stop with ignition key - Electric fuel pump - Reversible cooling fan - Fuel tank capacity: 162 l - Year of manufacture: 2017 - Operating hours as of November 2025: 9570 hours Swing System - Hydraulic swing system - Automatic swing brake Undercarriage - Rear blade (parallel guided) - Cylinder protection for blade - 40 km/h drive (road, work and creep mode, cruise control) - 14 t JCB axles - 4-wheel steering, direction changeable between forward and reverse - 2-wheel, 4-wheel, and crab steering (automatic alignment) - Alliance tyres 650/45R22.5 (331 tread – except one tyre front right) - Wheel arches, pivoting with the wheels Adjustable Boom - Boom swing range 50 degrees left - Boom swing range 70 degrees right - Digging arm length 2.0 meters Electrical System - 12 V electrical system - 1 x 12V heavy duty battery, 50-amp alternator - Full road lighting + illuminated license plate holder at cab - Front cab work lights 2 x LED - Rear cab work lights 2 x LED - Additional rear cab work lights 2 x LED - Boom work lights 2 x LED - Warning beacon at rear of cab 2 x Hydraulics - 2 x hydraulic pump 158.4 l/min x 187 l/min - Maximum system pressure v Extras - Crane manual and inspection - Hydraulic quick coupler CW10 + lifting hook - Switching of valve block supply to mower basket function - Free swing (electrically switchable) - Work light inside digging arm - Rockinger trailer hitch + electric - Trailer tipper function + double-acting - Additional double-acting function undercarriage - Hydraulic trailer brake connection (undercarriage) Iiodpfx Acoykrvdorsc - Undercarriage power supply for camera-tipping bucket - Extra 7-pin socket through undercarriage - Extra socket undercarriage for indicator light - JCB Live Link weekly machine report (annual subscription) STANDARD DITCH CLEANING BUCKET - In very good condition - No cracks in the bucket - Blades are good SORTING GRAB - Brand Kinshofer D09HPX - Sorting grab with rotator CW10 - Hoses and couplings complete - Year built: 2016 - Technically in perfect condition DEMOLITION BUCKET - Brand GP - As good as new TIPPER TRAILER - Brand DKV - Hydraulic tailgate - Max. total weight 7 tons - Dutch registration - Suitable for tractor and excavator

Condition: used, functionality: fully functional, power: 31.7 kW (43.10 HP), overall weight: 1,374 kg, operation weight: 1,374 kg, operating hours: 2,585 h, We offer this used Toro Reelmaster 6700-D all-wheel drive mower. Operating hours: 2,585 h VAT can be stated separately. Rated power: 31.7 kW Rated speed: 3,000 rpm Isdsy Ib R Tepfx Acroic Operating weight: 1,374 kg Sound power level: 105 dB Serial number: 313000123 Country of origin: USA No guarantee or warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, condition: new, Selling price: € 150, US$ 158 Iiodpfsph Rmksx Acrsc Galen Group designs and manufactures tough, durable, specialized forestry attachments for a wide range of applications. Our forestry attachments, deck mowers, grapples, log jaws, and tree shears, are designed and, on occasion, customized to arrive fully compatible with your tractors, loaders, excavators or skid steers. We offer product lines with multiple models to work seamlessly with different drive systems and horsepower capabilities. GALEN forestry attachments deliver excellent return of investment for the equipment investment. When you’re ready to get down to work, pick up a orange one that is the GALEN attachments! Price is representative, for detailed information please contact us.

Condition: used, Mower, lawn mower, cutter bar, disc mower -Handed over in current condition as seen and unchecked from storage Iijdocumglopfx Acroc -Sold: 9 pieces of lawn mower -Price: complete for all 9 lawn mowers -Manufacturer: EDE 1648P, SABO 43-130H, Wolf 6.36E, MEP TV 460SP, Fleurelle E451, Gutbrod Superior, Kynast V48H, Ering -Petrol and electric lawn mowers -Weight: 232kg

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Ijdpfx Asyf Hihocreic Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: used, Year of construction: 2026, Front-mounted disc mower Iiedpfx Acey Acmrorec Technical data: Working width: 3.11 meters Number of mower discs with disc protection skid shoes made of hardened steel: 8 Adjustable cutting height with standard skid shoes: 30-50 mm Disc shaft overload protection: PROTECTADRIVE Ground adaptation: pull-type 4-joint suspension Relief setting: via relief springs Lift for swath crossing: using integrated implement lift cylinders Average swath width: 1.30 meters Swath device: via 2x2 rotating, belt-driven swath drums Mounting: via quick-attach triangle on the implement side Conversion to transport position: by folding up the side protective covers Intermediate PTO shaft with freewheel, standard PTO speed: 1,000 rpm, clockwise and counterclockwise (factory setting: clockwise) Power requirement at PTO: 38 kW / 43 hp Required hydraulic connections on tractor: 1 single-acting spool valve Lighting system with warning panels - front and rear of the machine Weight: 1,010 kg Image for reference only, storage location: null

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, color: red, axle configuration: 4x2, operation weight: 753 kg, empty load weight: 753 kg, fuel: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 1,350 h, Equipment: differential lock, self-propelled working machine: + Gianni Ferrari + PG280 D + Year of manufacture: 2015 + 1,500 operating hours (according to previous owner) + Hydrostatic drive + 3-cylinder Kubota 902 diesel engine, 898cc, 20hp + High dump + Protective bar + Lighting + Rear-wheel steering Iiodpfxjyyynhe Acrjc + Rotary mower deck, 130cm, 2 blades + Unladen weight: 753kg + 800l grass collection container + Differential lock + Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and prior sale reserved!

Condition: new, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, color: orange, Year of construction: 2026, Equipment: all wheel drive, hydraulics, IRUS Crawler – Mowing, Mulching & Forestry Maintenance Model designation: various models Base price: €53,000.00 (smallest machine) Mowing & Mulching • Mowing on slopes and steep terrain (depending on model, up to approx. 60° incline) • Roadsides, embankments, levees • Solar parks, wind farms, utility corridors • Orchards & extensive grassland • Tall growth, shrubbery, blackberries (with flail mower) • Mulching instead of mowing → material remains on the ground and decomposes Forestry & Landscape Maintenance • Maintenance of reforestation areas • Removal of undergrowth in the forest • Keeping paths, aisles, and logging roads clear • Preparing areas for new plantations Municipal & Construction Applications • Railway embankment maintenance • Mowing along highways & federal roads • Operations in hard-to-reach terrain • Use on landfill or recultivation sites With Attachments (very important!) Depending on the configuration, you can use e.g.: • Flail mower • Sickle bar mower • Rotary mower • Snow blower or snow blade • Sweeper • Winch • In some cases also rotary tiller / forestry mulcher This makes the IRUS Crawler usable all year round. ️ Operation & Safety • Radio remote control → work from a safe distance • Very low center of gravity → extremely stable on slopes • Ideal for locations where use of a tractor or manual labor would be too dangerous Cost-effectiveness • Saves labor time & personnel • Replaces manual brush-cutting • Especially interesting for: o Contractors o Municipalities o Landscaping companies o Forestry operations ✅ Rental & demonstrations available! We are happy to offer rental solutions and organize demonstrations (also on challenging terrain), to help you find the right IRUS Crawler including attachments for your application. Contact: Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog General Representative JCB Sales and Service Partner Iodpfx Ajyim Uvocroic Hans-Grade-Straße 2 · 04509 Wiedemar Marlon Schütz – Sales Municipal Special Equipment

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Iisdpjfn Tvhsfx Acrjc Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]