Condition: excellent (used), CAMAM MO-4A double-sided oscillating drilling machine Gbelhccstp Tnzjqksl Number of spindles per side 3 Tool mounting chuck basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material presses per side

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Gbolhcskwg N Uecqkel Location: Röllbach

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm Gbolhccqjwimz Hskel No of Bottom Units: 2 No of injectors: 7

Condition: used, Year of construction: 2021, Working dimension X: 3.050 mm Working dimension Y: 900 mm Working dimension Z: 60 mm Vertical drills: 11 Horizontal drills in X: 4 Horizontal drills in Y: 2 Groove saw: Yes Gslhccjwh Tvbsqksbl Vertical working surface: Yes Safety device: enclosed cabin Control: SCM eye-M Conformity marking: CE mark Weight: 1.309 kg

Condition: used, number of spindles 90-2000 Gjlhcevwgqxjcqksbl bore capacity in steel (diameter) 23 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1100 x 2450 mm

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm Gbelhjkwhiijccqksl 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm No of Bottom Units: 5 Gbslhccqewimzyekel Lateral horizontal groups: yes

Condition: used, Used machine Condition: Functionally tested Technical data: Fully automatic pneumatic sequence control (clamping-drilling-unclamping) by means of for each program separate start button for each program Drilling chip distance (hole center) min. 32 mm max 800 mm Distance between stop and drill hole row min. 10 mm max 550 mm Drill head 6 pieces Number of drilling spindles of the drilling head 2 pieces 2 motors 1.5 kW each Gbslhccskwg Shsqkel Spindle speed 3000 rpm For horizontal and vertical construction drilling For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drilling heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops and drill bits Location: Röllbach Availability: short term

Condition: used, Year of construction: 1985, Used machine Year of construction: 1985 Gbelhjkwg Nmsccqkol Condition: Functionally tested Technical data: For horizontal and vertical construction holes For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drill heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops and drill bits Location: Röllbach Availability: Short term

Condition: used, Used machine Used dowel boring machine from Ganner for frame and carcass joints Pot hinge and connecting fittings in System 32 Fully automatic pneumatic control with foot valve Clamping - drilling - separated, electric intermittent operation T-drilling beam 7 + 2 drilling spindles, pitch 32 mm Drilling unit can be swiveled by 90 Drill hole depth with drill 57 mm total length 0 - 27 mm with drill 77 mm total length 0 - 55 mm Shank diameter of the drill bit 10 mm Height adjustment (position) 0 - 80 mm Golhcekwhiqscqksbl Clamping height max. 80 mm Motor 1.1 kW Spindle speed 3000 rpm Compressed air connection 6 bar including various drill bits without tools and sharpening machine on the machine Availability: short term Location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of construction: 1993 Frame dowel and slot drilling machine Gbslhccqepa Uzbokjl Two-jaw chuck for tools up to 20 mm shank diameter Motor 1.5 kW Position adjustment for 2 levels, pneumatic (0-100 mm) Drilling depth max. 150 mm Precision raster rail with 12 mm raster with center locking and cross adjustment 320 mm 2 pneumatic safety clamping cylinders Slot drilling device can be lowered with 2 program cams Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: Well maintained/functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. in 32 mm pitch Drilling direction: Bottom & front Tilt: 0-90 degrees by handwheel Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1.5 kW Suction diameter: 120 mm Incl. a variety of stops (see pictures) Gbjlhcokwhvgjcqksl Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1999, Used machine Year of construction: 1999 for drilling holes in carcasses, frames, rows of holes and fittings in System 32 incl. length stop 2200 mm incl. width stop 1550 mm Technical data: Drill spindles: 25 32 mm pitch Working width: 768 mm Clamping height of the workpiece max. 100 mm Position adjustment of drilling unit 0 - 45 mm Hole row position adjustment 0 - 300 mm Spindle speed 2800 rpm Shank diameter of the drill bit 10 mm Pneumatic clamp: 4 Parallel stops: 2 Gbslhcowi Afnecqksl Motor: 1.5 kW Weight: approx. 450 kg Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2006, Used machine Year of construction: 2006 Equipment and technical data: For manual production or as a stand-by machine in CNC operation, Universal machine for drilling carcase parts and for processing corner joints, frame joints, holes on the surface side, holes for cabinet fittings, etc. - Drilling unit kW 1.84 Volt 230 / 300 Golhcswi Afzocqksbl Hz 50 Speed rpm 2840 - Number of spindles: 21 - Spindle pitch mm 32 / 32 - Max. spindle distance mm 640 - Spindle direction of rotation 11 x right / 10 x left - Drilling stroke mm max. 80 - Drilling depth with 80 mm drill bit mm max. 45 with 105 mm drill bit mm max. 70 - Height adjustment mm 4 - 43 - Workpiece clamping 2 safety clamps - Clamping height mm max. 90 - Gantry passage mm max. 740 - Pneumatic control with foot valve foot valve, electric intermittent operation - Table size mm 880 x 400 Shipping dimensions: 150x110x150 cm Weight: approx. 340 kg Availability: short term Location: Flörsheim

Condition: used, Used machine For drilling dowels into flat or end faces With roller-bearing drill shaft and conical claw coupling Gslouncz Rjhccqkjbl Driven by any hand drill Working width 650 mm With 7 drill shafts Pivoting drill beam 0° - 45° - 90° Clamping height 80 mm Minimum drill hole spacing 30 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1980, Dowel boring machine Year of manufacture 1980 Equipment and technical data: for horizontal and vertical drilling Horizontal position - for frame dowel work or construction drilling the side stops are positioned left and right in the mirror image using an adjustment gauge. Vertical position - drilling gear 90° rotatable with adjustable stop positions Drill motor 0.75 kW n = 2800 rpm Drilling gear standard 9 spindles Spindle distance 32 mm Drilling stroke 100 mm with hydraulic linear guide Air consumption per drilling operation 3.5 l Table size 1000 x 600 mm Golhccqeq Syzaokebl Working height 840 mm Gross weight 200 kg, net weight 130 kg Packaging dimensions 1200 x 1050 x 1700 mm Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 Gbjlhccqeuh H R Uokel table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. Gbjlhceudqfzjcqkol The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Gboljudqk Rjhccqkol Weight approx. 300 kg Availability: short term Storage location: Flörsheim

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Gelol Riy Hjhccqkobl Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Gjljkwhd Eohccqksbl Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 1995, Hole line and hardware drilling machine Year of construction 1995 Gbslhjudqlbeccqkel Single-row hole drilling and hardware drilling machine Pot hinges and fittings can be processed without major conversion work Workpiece width max. 600mm Drilling beam with 15 spindles pitch 32 mm Manual indexing system with drop-in stops Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill bit holder 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Gjlhcjvymd Rscqkobl Equipment and technical data: 2-jaw drill chuck up to 20 mm shaft diameter pneumatic position adjustment on 2 levels 0-100 mm max. drilling depth 150 mm Precision grid rail 12 mm Center locking and cross adjustment. 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed 2800 rpm Machine weight approx. 310 kg Machine size (WHD) 1100 x 1100 x 1500 mm (without stop) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor Gjlhccqsri U Hdoksbl including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Rated operation mode drive motorS3 Supply voltage400V Mains frequency50Hz Noise emission Sound pressure level78,3dB(A) Pneumatic connection Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Gbslhokwhldoccqkol Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately