Used Mectec A2220/B-C160-110/110-L for sale (82,520)

Condition: new, Year of construction: 2022, functionality: fully functional, working width: 750 mm, area performance: 5,100 m²/h, warranty duration: 24 months, tank capacity: 110 l, total height: 1,315 mm, total width: 975 mm, total length: 1,695 mm, water tank capacity: 110 l, gradeability: 10 %, noise level: 59 dB, Technical Specification Drive type: Battery powered Traction drive: Traction motor Brush working width: 750 mm Working/suction width: 950 mm Clean/dirty water tank capacity: 110 / 110 l Theoretical maximum area performance: 5,100 m²/h Practical area performance: 3,600 m²/h Battery voltage: 24 V Maximum battery operating time: 4 h Charger supply voltage: 100 – 230 V / 50 – 60 Hz Climbing ability: 10 % Brush rotation speed: 180 rpm Brush pressure: 40 g/cm² Maximum water consumption: 5.7 l/min Sound pressure level: 59 dB(A) Rated power: up to 2,350 W Permissible total weight: 650 kg Dimensions (L x W x H): 1,695 x 975 x 1,315 mm Side scrubbing module for time and cost savings: - Enables cleaning of areas near walls or shelves close to edges. - Retracts under the unit upon contact with obstacles, preventing damage. - Eliminates manual edge cleaning, reducing associated costs. Height-adjustable seat: - Provides a comfortable working position regardless of the operator's height. - Ensures a particularly comfortable posture during operation. - Allows extended and uninterrupted working intervals. Speed-dependent water dosing: - Reduced water consumption when negotiating curves or during slow movement. - Water-saving function increases the effective area coverage. - Shorter floor drying times and lower risk of residual water left in corners or turns. Suction bar made of die-cast aluminium: - Equipped with tear-resistant and durable Linatex® squeegee blades for excellent vacuuming results. - Quick and easy replacement of squeegee blades. Godpfx Aew Id H Njnxjub - Retracts upon wall contact to prevent damage.

Condition: ready for operation (used), Seidel 20K-200/100-B converter SN: 52-72235 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Guedpsl Eck Iofx Anxob

Condition: ready for operation (used), Indramat MAC090C-0-KD-3-C/110-B-1/S001 permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, strong traces of use, 100% functional, scope of delivery according to photos Gsdoi D Imnjpfx Anxjub

Condition: ready for operation (used), Indramat MAC090C-1-GD-1-B/110-A-2/-I01250/SO13 motor SN: MAC090-42934 - Tacho constant 3.0 V / 1000 min-1 / brake 14 Nm DC 24 V, used, good condition, 100% functional, delivery as per photos. Guedpfx Aoxtv U Uonxsb

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-52-99546 L 3x148V 21 kVA,used, good condition, 100% functional, scope of supply acc. photos Gedjl Eckrspfx Anxeub

Condition: ready for operation (used), Seidel 20K-200/100-B converter SN: 52-59933 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Gjdpfx Anel Eckyoxsub

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor SN: MAC090-24745, used, minor signs of wear, 100% functional, scope of delivery as per photos Guodpfx Anolmta Tjxjb

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Guodpfx Anol Eck Djxjb

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-0/S001 Permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, small traces of use, 100% functional Gsdpfx Asi D Imyonxjub

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Gedpfx Anjx Aqdcjxoub Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Year of construction: 2007, working width 1380 mm Gsdpfet Hw Iijx Anxeub workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: used, Year of construction: 1988, Manufacture : Goavec SA Year : 1988 Previous application: Cream tank (fluid/thick) Godpfjx R Dkusx Anxoub Volume : 10000 Litres Material : 304 stainless steel (Thickness : 25/10) Insulation : yes Tank pressure : atmospheric Agitation : 2.4 KW - 32 rpm 1 fixed paddle: counter-stirring Washing balls: 3 units Inspection hatch: manhole Removable guardrail Drawing available (digital version)

Condition: used, empty load weight: 3,280 kg, maximum load weight: 6,720 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, next inspection (TÜV): 08/2024, loading space length: 7,270 mm, loading space width: 2,490 mm, loading space height: 2,880 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, tarpaulin and bows, 2-axle, tandem, air suspension, ABS (anti-lock braking system), Edscha, lashing eyes, U-protection, through-loading system, front support, rear support, storage box, height-adjustable drawbar Guedpoqbr Nnofx Anxob Body: load-through tandem trailer with tarpaulin + bows & Edscha roof GFA axles, drum brakes! Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm Gsdpfx Anst Ei Hnexsub table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Guedsx N Ibhjpfx Anxsb Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. Guodoxtvb Ujpfx Anxjb 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Gsdew Ixz Uepfx Anxjub Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: excellent (used), approx. 3000 m² steel construction platform 2-storey used, good condition, see pictures Manufacturer STOW Length approx. 58,5 m Width approx. 54,6 m height lower edge 3,4 m Height upper edge 3,7 m Load 500 kg/m² C-profiles and sigma-profile construction fixed with screws and nut Grid spacing adjustable in length floor structure is 38 mm chipboard, highly compressed, tongue and groove Gujdpfxod S S E Uo Anxsb underside white, upper side grey coated Negotiated price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs are available on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Godpfsd S S N Rjx Anxeub

Condition: new, 🧰 Product features • Condition: new • Colour: black • Volume: 43.7 l • Load capacity: 20 kg • Net weight: 1.2 kg • Length: 60 cm • Width: 40 cm Gjdpfx Anok Shvujxjub • Height: 22 cm • Stackable: Yes • Dimensionally stable: Yes • 40 units per pallet 💰 Price: €15 net excl. VAT 💰 Price from 40 units: €12.90 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide, on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Over 5,000 linear metres of pallet racking from various manufacturers in stock at all times (Technical data, specifications and prices subject to change. Prior sale reserved. Please refer to our T&C. All prices ex warehouse excl. VAT.)

Condition: good (used), Manufacturer Thurm type B 20 R 100 L 4-2 HL H STR Engine number 12618430011409 power 3,7 / 4,4 kW speed 1.425 / 2.890 rpm Shaft length Shaft diameter Gsdpemw Uncsfx Anxeub Weight 48 kg Dimensions Motor of milling machine Deckel FP3A CNC machine number 2206 - 0443

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm Godpolp U Rvefx Anxjub stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Gusdpfx Anow Uf S Hoxjb

Year of construction: 2015, condition: excellent (used), machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Gsdpfjwgwrqsx Anxeub Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. Guodpjf Tdwcsfx Anxjb →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t