Used Mixaco Cm 1000 for sale (18,479)

Condition: excellent (used), CATALOG NUMBER 7896 TECHNICAL DATA - Spindle diameter: 30mm - Working height of spindle: 125mm Gjdpfxjy Ry Rkj Anxoub - Interchangeable spindle - Spindle locking - Height and angle adjustment (up/down + angle) - Fence with adjustment - 4 spindle speeds + left/right rotation: 1400/3500/6000/8000 rpm - Table dimensions: 1000x550mm - Cast iron table - With sliding carriage 1150x350mm - Hold-down clamp - Angle stop - Motor: 4kW - Brake - Extractor port diameter: 2x120mm - Overall (L/W/H): 1320x1550x1200mm - Weight: 400kg ADVANTAGES – Bulgarian-made – With sliding carriage - With tilting spindle – Used milling machine – In very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR exchange rate (Prices may change depending on fluctuations)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Gusdpeyniz Esfx Anxsb Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Godpfx Ajy Nnmwsnxoub Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 850 mm Height: 730 mm Weight: 886 kg Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Gedpfx Aeyv I Risnxoub Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: used, Stand height: 192 cm Godpfx Aneqy Rq Isxeub Floodlight: Max. 1,000 W 2 ESYLUX HAST 1000 floodlights with stand and switching unit for illuminating and heating workpieces, workspaces, or other application areas.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Gedpfx Ansudxchexeub Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Gusdpfsud A Hkjx Anxsb Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function Godoy Sathopfx Anxsub + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: new, Center lathe and feed spindle lathe Make: ROMI Model: T240 x 1000 Condition: New machine centre height: 220 mm Center width: 1.000 mm standard equipped with: Gusdjb Suakopfx Anxeb - 3-axis digital display FAGOR Innova 30i-T - cooling device - Bed stop for automatic switch-off - Quick change tool holder base body size B - Instruction manual

Condition: ready for operation (used), Year of construction: 1998, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1300 mm Z-AXIS TRAVEL: 1200 mm SPINDLE: 60-6000 rpm; 30-37 kW; ISO 50 - BT PALLET: N.2 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 120 POS CONTROL UNIT: MSC 502 WEIGHT: 35200 Kg OVERALL DIMENSIONS: 5330 x 7720 x 3810 mm ACCESSORIES: HIGH PRESSURE COOLANT ; Gusdpfjyvlx Djx Anxsb SWARF CONVEYOR ; RS 232 SERIAL PORT ; TOOL SETTER NOTE: MAX PIECE DIAMETER 2000 mm; MAX HEIGHT 1550 mm; MAX WEIGTH 3000 Kg

Condition: used, functionality: fully functional, SAC 1000 CLS/S Wide Belt Sander - Ready for Operation Specification: • Condition – used, after comprehensive inspection • Manufacturer – SAC • Model – CLS/S • Working width – 1000 mm • Max. working height – 160 mm • 1 sanding unit – hard rubber drum • Main motor power – 11 kW • 2 conveyor feed speeds • Table with pneumatic actuators – optimal for calibration • Electronic thickness gauge for sanded workpieces • Oscillation on pneumatic shoe • Abrasive belt dimensions – 1030x1900 mm • Weight approx. 1300 kg • Overall dimensions 150 x 222 x 187 cm (L x W x H) Additional Information: • Machine is in excellent technical condition and ready for immediate use • Photos show the actual condition of the item offered for sale • Possibility to start up and test the machine on site • Free operator training (at company headquarters) Gjdpey R Evrefx Anxsub • Price listed in the auction does not include VAT or shipping costs Financing and Transport: • Transport can be arranged with MDD fleet, courier services, or external carriers • We offer financial solutions such as leasing or lease loan

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min Gjdowc U Nlepfx Anxsub distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed no foundation pit necessary Guedpfx Ansvut Tzoxob

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min Gujdpeyzptiefx Anxsb longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Year of construction: 2026, condition: new, functionality: fully functional, total length: 200 mm, total width: 500 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, machine/vehicle number: 2026, Air conditioner / proofer air conditioner NEW Lillnord Model: PG 1000 Powerful with sophisticated technology for all fermentation rooms up to 6 sqm Temperature range +20 to 45 ° C adjustable via thermostat Humidity range 60 to 95% R.H. adjustable via hygrostat Automatic water regulation long lifetime! thanks to the proven "Lillnord system" Gsdjfvvnmopfx Anxjub Dimensions: 500 x 200 x 1700 mm, WxDxH DGUV V3 tested Connection 400V, 6.5 kW, 16A-CEE plug NEW device with 12 months warranty Come to our large bakery machine warehouse!

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Gedey Sgzxopfx Anxoub Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Year of construction: 2025, condition: new, functionality: fully functional, Improve the quality of your finish with the DAS LDX 1000 – 6 brush sander The DAS LDX 1000 – 6 automatic machine is designed for precise sanding and finishing of profiled wood or MDF elements, offering excellent results even for the most demanding aesthetic requirements. It is ideal for smoothing, fine sanding and final preparation of surfaces, thanks to the versatile and robust configuration of the 6 working units. Standard features and technical characteristics: Multiple working units: oscillating longitudinal drums, oscillating pads, transverse drums with Ø 280 mm and width 1000 mm, equipped with 20 helically mounted brushes. Working capacity: max. width 1000 mm, workpiece thickness max. 100 mm. Efficient sanding: disc rotation speed between 50 – 300 RPM (adjustable via frequency inverter). Sanding brushes: adjustable length between 20 – 70 mm, allowing detailed work on profiles with a depth of up to 8 mm. Touchscreen control panel: Ergonomically positioned, it allows independent control of each unit. The interface is intuitive, developed by DANIBRUM engineers for fast and efficient operation. Adherent conveyor belt: Equipped with ribbed rubber for constant advance, driven by a 1.1 kW motor. Includes automatic centering roller, height adjustment sensor and brushes for dust removal at the entrance and exit. Professional sliding system: Based on recirculating ball bearings, it offers precise, reliable and low-maintenance movement. Lubrication is done manually. Oscillation for sanding units: Ensures uniform finishing and prolongs the life of abrasive belts and sisal brushes. Efficient exhaust system: Each group has dedicated exhaust ports, connected to 8 Ø 100 mm outlets, keeping the work area clean and efficient. Fast side access: Large side openings allow easy brush changes and quick access for maintenance. Toothed belt transmission: Ensures constant speeds, stable transmission and low noise level during operation. Flexibility in finishing: The "fast release" system allows for quick changes of belts and brushes. The adaptable configuration is suitable for various styles and types of finishing. The DAS LDX 1000 – 6 machine is an efficient solution for manufacturers who want superior quality in the processing of profiled wood elements, with high productivity and impeccable finishing. Maximum working width 1000 mm Maximum working height 100 mm Longitudinal drum diameter (Ø) 220 mm Longitudinal drum drive motor power - oscillating 2 x 1.5 kW Longitudinal drum oscillation motor power 0.55 kW Oscillating pad diameter 200 mm Oscillating pad drive motor power 1.5 kW Pad oscillation motor power 0.18 kW Transverse drum diameter (Ø) 280 mm Transverse drum drive motor power Godpewhbtzofx Anxoub 2 x 2.2 kW Advance motor power 1.1 kW Brush speed max. 1000 rpm Exhaust hood diameter (Ø) 4 x 100 mm Overall dimensions 3300 x 1600 mm Weight 1500 kg Technical support available in Romanian, English or German.

Condition: used, Year of construction: 2012, operating hours: 56,500 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 2,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Gsdpfx Ajy N Eccenxoub terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Guedpfxjwwkx Es Anxjb Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,664 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 526, table width: 600 mm, table length: 1,200 mm, table load: 900 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport XR 1000 vertical machining centre was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a high-speed spindle capable of 12,000 rpm and a side-mounted automatic tool changer with a capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Bridgeport XR 1000 machine we have for sale. Contact us for further details. • Spindle taper: ISO 40, MAS-BT 40 • Tool setting: Tool length setting probe • Tool changer type: Side-mounted automatic tool changer • Machine condition: Fully functional, excellent running condition • Spindle bearings: Rebuilt in 2023 Guodoy Rrgqjpfx Anxeb Technical Specification Taper Size ISO 40

Condition: new, Type 1000-2S Gsdpfxjm Dr Rnj Anxsub Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Condition: new, Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11,57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania) Guodpfjyqx Dbsx Anxjb

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Gsdjdmi Niopfx Anxoub Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: new, Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW*1 Disc swing motor 0.37kW *1 Screw roller motor 2.2kW *2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg Gjdpedmi Ntefx Anxjub

Condition: used, Year of construction: 2008, operating hours: 73,000 h, clamping force: 70 kN, displacement volume: 49 cm³, injection pressure: 2,500 bar, overall weight: 3,500 kg, screw conveyor diameter: 2,53,035 mm, terms of delivery: FCA Pegnitz delivery time: on request Gedpfxey Ntmio Anxjub terms of payment: 100% prior to delivery