Used Weisser Junior for sale (45)

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 3251, turning diameter over cross slide: 230 mm, spindle bore: 45 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,200 mm, total length: 2,600 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 26 rpm, metric thread diameter (max.): 112 mm, metric thread steps: 40, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, This centre lathe is equipped with digital readout on two axes, a central lubrication system for the carriage, a complete cooling system, chuck guard, and meets the minimum safety requirements. Itsdpfsxxx Arjx Aanor

Condition: ready for operation (used), Year of construction: 1983, turning length 1500 mm turning diameter 475 mm turning dia. over face-slide 290 mm turning dia. in gap 655 mm turning speed range 14.0 - 2000 U/min feeds - longitudinal 0.05 - 0.736 mm/min spindle passage 61.0 mm tail stock MK 4 Itodpfxsxfwc Rj Aanjr quill stroke 200 mm diameter of quill Ø 70.0 mm spindle head DIN 55022 GR 6 voltage 380 V total power requirement 7.5 kW weight 2400 kg range L-W-H 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition (!!) With original documentation + machine card Features: - Robust electric motor-driven conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX steel holder with 3x inserts - Movable steel holder guard - Adjustable bed stop - Movable tailstock incl. center point - Swiveling machine light - Machine swing feet - Chip guard (movable from behind) - EMERGENCY stop button at the front - Original operating instructions + machine card

Condition: used, Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret Isdpfsxpufqjx Aanjtr 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm Iodpfx Aodmbrxjanstr turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools Itsdpfsxwmf Sjx Aanor - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: used, Year of manufacture: 198x Technical data: Centre height: 295 mm Swing over bed: 600 mm Swing over cross slide: 390 mm Distance between centres: 1000 mm Spindle bore: 72 mm Ijdjx Ir Amopfx Aanetr Speed range: 72 - 1400 rpm Drive power: 11 kW Weight, approx.: 4000 kg Equipment: - 2-axis digital readout, Heidenhain ND 780 - Collet chuck - 3-jaw chuck - Multifix quick-change toolpost with 2 tool holders - Spindle guard - Toolholder guard

Condition: used, Year of construction: 1955, Heavy lathe, turning machine, lathe, lead screw lathe, lead screw lathe -Handover: in current condition as viewed -Error: Switching spindle, main spindle continues to rotate in neutral switching position -Manufacturer: Weisser, lead screw lathe type G1 -Turning length: 1660 mm -Turning Ø over bed: 480 mm -Turning Ø without bed: mm -Turning Ø over support: 210 mm -Spindle bore: Ø 45 mm -Spindle speeds: 31.5 - 1400 rpm Isdpfx Astzf Rheanotr -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK4 -Drive motor: 5.5 kW -Dimensions: 3150/1180/H1300 mm -Weight: 2800 kg

Condition: used, Year of construction: 1975, total length: 4,400 mm, total width: 1,450 mm, total height: 1,700 mm, Empty weight: 4.000 kg - Year: 1975 - Documentation available: Yes - CE certificate present: No - Serial number: 1677 - Drive system: Conventional - Centre height [mm]: 230 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 7.1 - Max. spindle speed [rpm]: 1400 - Options: Three-jaw chuck, Quick-change tool post, Travelling steady, Fixed steady - Transport dimensions: 4400mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Iedpfx Asxixh Njanotr

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,350 kg, driver cabin: other, Vehicle location: in transit, Body: interchangeable system, combined spreader 5 m³ and dry material container approx. 6,600 l, approx. 5 m³ Wet salt tank 1,720 l, 3 x brine tanks of 1,650 l each, total approx. 6,670 l All information subject to change as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE – subject to change, prior sale, and errors! Itsdpfjxv D Uhex Aansr

Condition: repair required (used), Year of construction: 2000, functionality: not functional, empty load weight: 314 kg, Top-mounted spreader: - Küpper-Weisser Iedpfeuyhcrsx Aanotr - STA80 W12H - Year of construction 2000 - 1.2³ + brine - Parking feet - Spreader is defective / rusted through! Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 Itodpfxjxxinfe Aansr - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Itedpfogyy I Aox Aanor Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: used, mileage: 1,000 km, power: 1 kW (1.36 HP), first registration: 02/2002, empty load weight: 810 kg, maximum load weight: 6,690 kg, overall weight: 7,500 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: cabin, German machine, year of manufacture 2002, Küpper Weisser wet salt spreader, type: STA 95, with control unit, capacity: 1.5 m³, wet salt container, municipal control system, foldable tarpaulin cover, auger drive, unladen weight: 810 kg. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP inspection, and without new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability from the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Isdpfxoxl Skce Aanotr Subject to prior sale, changes, and errors.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,000 h, functionality: fully functional, machine/vehicle number: 1580196, travel distance X-axis: 320 mm, travel distance Z-axis: 844 mm, spindle bore: 50 mm, controller model: SINUMERIK 840 DE, tailstock quill stroke: 330 mm, TECHNICAL DETAILS Table Data Table diameter: 420 mm Swing diameter: 620 mm Center height: 420 mm Turret stroke: 280 mm Tailstock stroke: 330 mm Spindle bore: 50 mm Axes Programmable Travel +/- X1: 320 mm Z1: 844 mm C1 (spindle): max. 6,000 rpm W1: 1,400 mm (tailstock) X3: 1,500 mm Z3: 509 mm Axis Speeds Max. axis speed: 24,000 mm/min X3 speed: 60,000 mm/min Z3 speed: 30,000 mm/min Tool Interface: CAPTO C 5 Control: SINUMERIK 840 DE MACHINE DETAILS Electrical Data Three-phase operating voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Machine rated current: 53 A Main connection fuse: 100 A slow-blow Dimensions & Weight: Machine dimensions (L x W x H): 2,800 x 2,450 x 2,800 mm Machine weight: 7,500 kg Conveyor dimensions (L x W x H): 2,150 x 3,200 x 1,900 mm Conveyor weight: 2,500 kg Chip conveyor dimensions (L x W x H): 3,500 x 800 x 1,600 mm Chip conveyor weight: 500 kg Guard dimensions (L x W x H): 2,200 x 1,400 x 800 mm (stacked horizontally) Guard weight: 250 kg Loader dimensions (L x W x H): 2,000 x 1,200 x 3,000 mm Loader weight: 250 kg Measuring machine dimensions (L x W x H): 700 x 900 x 1,700 mm Measuring machine weight: 500 kg Operating Hours Isdpfxjw H Nklj Aanjtr Spindle hours: 13,000 h Operating hours: 20,000 h Power-on hours: 34,900 h EQUIPMENT Programmable tailstock Driven tools Loading device Tool measuring station

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,090 kg, driver cabin: other, Vehicle location: in transit, Itjdpjxvdxaefx Aansr Body: exchange system, combined spreader unit 5 m³ and 7,500 l dry material container, approx. 5 m³ Brine approx. 7,500 l With brine spraying system, wind deflector, and support legs! All information is provided without guarantee as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, overall dimensions 500x450x850 mm; power supply 400 V, 50 Hz; power 370 W; pedal control or continuous operation; mold diameter 90 mm; thickness up to 28 mm; productivity up to 1000 pcs/h; loading 15-20 kg. Iodpowql Saefx Aanetr

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm Itsdpoxw R Rfjfx Aanjr - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min Isdpovxwqrofx Aanetr rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool taper Capto C4 total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 177055267, travel distance X-axis: 400 mm, travel distance Z-axis: 280 mm, workpiece diameter (max.): 400 mm, clamping diameter: 210 mm, workpiece length (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to timely collection by 31/07! TECHNICAL DETAILS Capacities Max. clamping diameter: 210 mm Max. workpiece diameter: 400 mm Max. workpiece length: 120 mm Travel distances X-axis travel: 400 mm Z-axis travel: 280 mm Control Control unit: Siemens Sinumerik 840 D Tool turret: 8-position MACHINE DETAILS Footprint Length: 7,500 mm Width: 4,000 mm Height: 3,500 mm Weight: 12,000 kg EQUIPMENT - Parts conveyor belt with Siemens PLC control - Part measuring system for inside diameter measurement of gear rims Ijdpfxjwyi Iko Aanstr Note: Transport will be carried out by truck with max. width of 3,000 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Itsdovw Upcspfx Aanjr Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, empty load weight: 2,500 kg, driver cabin: other, Vehicle location: Bovenden, Equipment: Küpper Weisser salt spreader with separate engine (Hatz). Salt spreader approx. 4 m³ with 2 brine tanks. Hydraulic supply for snow plow possible. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Itedsxddxiopfx Aaner

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter: 250 mm, turning length: 400 mm, controller model: Siemens 840 D, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Isdpfx Aajwmn Ezenjtr Turning diameter: 250 mm Turning length: 400 mm Control: Siemens 840 D MACHINE DETAILS Total power requirement: 45 kW Machine weight approx.: 17 t Space requirement approx.: 7.0 x 5.0 x 3.2 m

Condition: ready for operation (used), Year of construction: 2011, operating hours: 80,574 h, functionality: fully functional, machine/vehicle number: 1 790 56 986, travel distance X-axis: 230 mm, travel distance Z-axis: 280 mm, spindle speed (max.): 3,500 rpm, turning diameter: 450 mm, distance between centers: 639 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 450 mm Center distance: 639 mm X-axis: 230 mm Z-axis: 280 mm Tailstock stroke: 200 mm Itodpfx Aowmnzioaner Spindle Spindle speed: 3,500 rpm Spindle bearing diameter: 150 mm Spindle head: A8 according to DIN 55026 Tool holder Number of tools: 2 × 12 MACHINE DETAILS Control system: SINUMERIK 840 D Total power requirement: 42 kW Machine weight: 22 t Space required: 6.5 x 3.8 x 3.1 m

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm travel -x axis 280 mm feed x-axis 0,1 - 30.000 mm/min rapid traverse X-axis 30 m/min travel -z axis 1.150 mm Feed z- axis 0,1 - 60.000 mm / min. Iodpfjwuuwtex Aanjtr rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5.000 U/min tool turret - number of stations 12 tool taper Capto C4 total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min Isdpfx Ajvxwwreanetr tool turret 12 times C4 Capto total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.