Used Modified Alcohol Metal Parts Washer for sale (45,076)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Fsdpfjfzrapox Anzsph ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Fpsdpfxofz A D Nj Anzeh • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! Fpjdpjyq Rkyjfx Anzeh The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Fpjdpfxsy H Aizs Anzsh FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each Fedpfx Anoyv Ewmjzsph - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck Fjdjy Sgdgspfx Anzsph • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Fpodpfx Anoxdmgvezoh Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. Fedpfxsxpxyre Anzeph This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020616/P, total width: 70 mm, total length: 90 mm, total height: 180 mm, pressure: 8 bar, operating pressure: 8 bar, input voltage: 230 V, Equipment: cabin, For sale: METAL FINISHING water blasting machine - Type – waterblast 800 - Model – WBL 001 - Serial No. – 020616/P - Year: 2008 The machine has seen minimal use and has been regularly maintained. It is highly practical and extremely efficient. Its key advantage is that with high water pressure—containing abrasive media—it impacts the metal surface, achieving excellent results. The main benefit of the water blasting method is that the water and abrasives circulate continuously, returning to the tank. This means there is no dust, no abrasive particles released into the environment, and the work area remains clean at all times. The machine is connected to the mains supply and ready for immediate operation. Fpedpfsy Rz Abox Anzeh

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Fodpfx Aewd Ulvjnzsph

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,100 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 8,000 rpm, total height: 2,300 mm, total width: 1,750 mm, overall weight: 2,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 18 m/min, feed rate Z-axis: 16 m/min, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, mount diameter: 120 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, position of the milling head: pionowa, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rotational speed (max.): 8,000 rpm, rotational speed (min.): 1 rpm, table length: 800 mm, table load: 300 kg, table width: 320 mm, Equipment: documentation/manual, rotational speed infinitely variable, The CNC 500L machining center is a modern and compact CNC milling machine designed for precise machining of metals and engineering plastics. Thanks to its rigid machine structure and linear guideways, it ensures high stability and accuracy even during intensive operation. The efficient spindle with a power of 5.5 / 7.5 kW and speeds up to 8000 rpm guarantees effective cutting performance across a wide range of materials. The machine is equipped with an automatic tool changer (12 positions), significantly increasing productivity and reducing setup time. Its intuitive CNC control system allows for quick programming and easy operation, even when working with complex parts. High positioning accuracy and repeatability of ±0.02 mm make the CNC-500L ideal for both single-piece and batch production. Additional features such as through-spindle coolant, chip evacuation system, chip conveyor, and a fully enclosed housing with LED lighting improve operator comfort and safety. Compact dimensions and the option to expand with a 4th and 5th axis make this machine a versatile solution for modern workshops. Technical Specifications Parameter Value X-axis travel 600 mm Y-axis travel 400 mm Z-axis travel 450 mm Distance from guideway to spindle center 100 – 550 mm Table size 800 × 320 mm T-slots 3 × 16 × 75 mm Spindle speed up to 8000 rpm Spindle power 5.5 / 7.5 kW Fpedpfx Ajy H Dnrsnzeh Spindle taper BT40 (Ø120) Linear guideways 30 mm Rapid feed X/Y/Z 18 / 18 / 16 m/min Cutting feed rate 1 – 8000 mm/min Positioning accuracy ±0.02 mm Repeatability ±0.02 mm Tool magazine capacity 12 tools Max. table load 300 kg Total power 15 kVA Dimensions 2100 × 1750 × 2300 mm Weight 2600 kg Power supply three-phase Equipment and Options Automatic tool changer (ATC) – 12 positions Through-spindle coolant system Chip evacuation system and chip conveyor Full enclosure with LED lighting UPS backup power supply for control system Option for 4th and 5th rotary axis This machining center combines precision, performance, and compact design, making it a reliable and efficient solution for a wide range of machining applications.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, overall weight: 1,370 kg, total length: 2,880 mm, total width: 1,450 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: documentation/manual, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For over 15 years, we have focused on quality, precision, and reliability. SHEET METAL BENDING MACHINE – SEGMENTED BENDING MACHINE 2.5 × 2040 Technical Specifications: Working width: 2040 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Dimensions: 2880 × 1450 × 1100 mm Weight: 1370 kg Machine Description: Rigid and durable steel construction Long operating levers enabling high force transmission Fedpfx Anoy Htk Nszoph Segmented clamping fingers on upper and lower beam for flexible bending lengths Counterweights on operating levers to reduce effort Eccentric clamping system for secure sheet holding Upper and lower beam made of high-quality steel

Condition: new, Year of construction: 2026, functionality: fully functional, Surface Grinding Machine – Column Type (Moving Column) Hardened and ground guideways in longitudinal and cross axes; counter-guides coated with Durcite-B ensure high rigidity and low friction. Longitudinal and cross movements run on V-flat guideways. Computer-controlled automatic feed including: rapid approach to workpiece, adjustable roughing and finishing feed, and automatic return to starting position after cycle completion. Preloaded axial and radial spindle bearings. Annealed machine base ensures high machining accuracy. Reinforced construction and thick-walled castings guarantee maximum rigidity. Adjustable limit stops for longitudinal and cross travel. Modern hydraulic system ensures smooth and stable table movement under heavy loads. PLC control (MITSUBISHI) with touchscreen allows programming of simple grinding cycles. Includes electronic handwheel. Standard Equipment: Fpjdpfey Hr Uyjx Anzjh Touch control system Electronic handwheel Grinding wheel Wheel flange LED machine light Electromagnetic chuck Balancing stand Balancing arbor Safety guards Demagnetizer Cooling system Diamond dresser Machine feet Central lubrication system Tool kit Technical Specifications: Table size: 500 × 1200 mm T-slots: 1 / 14 mm Magnetic chuck: 500 × 1200 mm Longitudinal travel: 1140 mm Cross travel: 540 mm Max. distance spindle–table: 570 mm Max. workpiece weight: 800 kg Grinding wheel: 350 × 20–40 × 127 mm Table speed (hydraulic): 5–25 m/min Model: SGC512AHD Brand: MTP Drives & Spindle: Spindle motor: 5.5 kW Spindle speed: 1440 rpm Hydraulic motor: 2.2 kW Vertical feed motor: 0.75 kW Dimensions & Weight: Length: 3550 mm Width: 2250 mm Height: 2530 mm Weight: approx. 5200 kg Included Additional Equipment: Magnetic separator with paper filter Full machine enclosure Parallel dressing device Dust extraction system DRO (2-axis) Integrated magnetic chuck controller Frequency inverter 6 kW Diamond dresser Additional wheel flange

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Fodpfxsxrz Nbs Anzoph Number: 29 Year of construction: 2003 kW: 4 RPM: 1500

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,850 mm, total height: 2,680 mm, total width: 1,650 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, Machine Description The SPB 110T x 3200 (HACO60) press brake is a modern CNC machine designed for precise sheet metal bending in both single-piece and serial production. It features an advanced electro-hydraulic servo system ensuring high accuracy, stability, and repeatability. Equipped with CNC control and synchronization based on linear encoders, the machine guarantees precise ram positioning and uniform bending over the entire working length. The automatic crowning system compensates for table deflection depending on applied force, ensuring consistent bending angles even with large workpieces. Its robust construction, fast tool clamping system, and precise back gauge provide high productivity, ergonomics, and reliability in industrial applications. Technical Specifications Basic parameters: Press force: 1100 kN (110 T) Working length: 3200 mm Distance between columns: 2700 mm Throat depth: 400 mm Stroke: 200 mm Max opening height: 480 mm Speeds: Rapid approach: 180 mm/s Working speed: 13 mm/s Return speed: 170 mm/s Drive & control: Motor power: 8.5 kW CNC system: HACO 60 (USA) Number of axes: 4 + 1 auxiliary axis Accuracy: Ram repeatability: ±0.01 mm Ram positioning accuracy: ±0.02 mm Back gauge repeatability: ±0.02 mm Bending straightness: 0.3 mm / 1 m Bending angle deviation: ±1–1.5° (up to 4 m) Encoder resolution: 0.005 mm Dimensions: Machine dimensions: 3850 × 1650 × 2680 mm Main Features Electro-hydraulic servo system CNC-controlled crowning system Linear encoders on both sides Precision back gauge with linear guides Fodpoy D Nvijfx Anzoph Ball screw driven by servo motor Quick tool clamping system Adjustable front sheet supports

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Fsdpfx Anoyxz Rhozoph

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Fpjdpfx Aney I Adnezeh

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 10 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 10 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Fpjdpfx Aeyt Itqsnzoh Table height: 800 mm Motor power: 15 kW Weight: 10,000 kg Machine dimensions (L × W × H): 4050 × 2050 × 1950 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 20 mm, turning diameter: 180 mm, turning length: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, overall weight: 52 kg, Technical Specifications Parameter Specification Turning length 350 mm Turning diameter 180 mm Spindle taper MT3 Tailstock taper MT2 Chuck diameter 100 mm Spindle bore 20 mm Metric thread range 0.5–2.5 mm Speed range 50–2500 rpm Motor power 0.55 kW Weight 52 kg Machine dimensions (L × W × H) 810 × 305 × 370 mm Equipment and Free Accessories Set of change gears Chip guard 4-way tool post 3-jaw chuck 100 mm Chuck guard Fpjdpoyud H Nsfx Anzoh Chuck key Set of Allen keys Set of jaws Dead center Drill chuck Arbor Delivery Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Fpedpsyt E Aiefx Anzjh Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Fjdpfjytpy Sox Anzeph Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Fpjdpfx Asytparjnzsh Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Year of construction: 2022, operating hours: 8,755 h, condition: used, functionality: fully functional, machine/vehicle number: MPR00044, We are offering this used One Click Metal MPRINT+ One Click Metal OCM metal 3D printer, year 2022. Current list price is €175,000, including 2 build cassettes (1 heated up to 250°C). The machine is still operational and is being sold because we have purchased a larger build volume system. Asking price: €85,000. Model: MPRINT+ and MPURE Serial number: MPR00044 Year of manufacture: 10/2022 Supply voltage: 230 VAC 50/60 Hz Fuse: 16 A Weight: 440 kg If you have any questions or require more information, feel free to contact us. Fpsdpjy N Dzwofx Anzjh

Condition: defective spare-parts repository (used), Year of construction: 1998, Used ARBURG 320 C 500 injection molding machine for sale. The equipment is not working, incomplete, being sold for parts! Fpsdpfxjyrd D Ne Anzoh

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Fjdjyrdzujpfx Anzsph