Used Muhr & Bender (Mubea) Section Shear - Combined for sale (7,495)

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. Ppjdow Sy Ecopfx Akfjr 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: used, Max. punching capacity: 600 kN Pedpeq D E Tcsfx Akfjpr Max. shearing power: 1000 kN Punches 20mm holes in 19mm steel Shears on the flat steel shears to 500 mm up to a material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, Year of construction: 1990, Max. punching capacity: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Ppodpfxstmyifj Akfjr Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Large support table on punching side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shears Projection: 305 mm Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Pedst Expropfx Akfjpr Support table on punching side Assortment of tools is included in the price

Condition: used, Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Psdpfxjr R Auze Akfopr Cuts 450 x 15 mm or 300 x 20 mm on the flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Assortment of tools is included in the price

Year of construction: 1990, condition: used, Max. punching capacity: 600 kN Max. shearing capacity: 800 kN Punches 27mm holes in 16mm steel Shears on the flat steel shears to 400 mm up to a material thickness of 16 mm steel Psdjm T Amuepfx Akfjpr Hydraulic hold-down device on flat steel shears Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for triggering the stroke quick-change device Assortment of tools is included in the price Ppjdpfx Aelf Trkjkfjr

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts 500 x 18 mm on flat steel scissors For example, punch 30 mm diameter holes in 20 mm flat iron Quick change device Assortment of tools is included in the price Weight: 3,000 kg Pjdpoq Iyvvefx Akfjpr

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm Pedpfx Akowm Rmnefspr total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: used, dimensions of the machine ca.:1000 x 550 x 1100 m Ppodpfx Akecxxqnjfsr

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears Ppsdpfx Aora Avdskfsr - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm Ppodpfst U R H Uox Akfsr I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear Ppjdpfx Aofkmr Sskfer (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Punching force: 1000 kN Ppodpfx Akjy Exdrjfjr Throat depth: 760 mm Stroke release via foot switch

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Ppsdpfxex Dtp Rj Akfor Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg Ppedpfjyv Ncyjx Akfjr

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg Podpfxjyv Nvaj Akfopr dimensions 1500 x 650 x 1700 mm

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm Ppodpoyv Nuiefx Akfer stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Psdpfsyv Nrzsx Akfopr Accessories / equipment: - punching table

Condition: good (used), for sheets up to: 5 mm Pjdpfxodyunpj Akfjpr Flat iron: 70 x 6 mm Rods: 11 mm Space: 330 x 120 x 1250 (incl. handle) mm high

Condition: good (used), for sheet thickness up to: 8 mm Psdpfjtx Uqajx Akfspr flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Required space: 300 x 170 x 680 mm Pjdpfx Akjhtq Hfefspr Weight: 32kg

Condition: used, Max. Stanzkraft: 500 kN Ppodpfx Aeu T Nv Dekfsr Reach out: 610 mm Inclusive assortment of punches and dies Weight: 1700 kg Very good condition

Condition: good (used), Year of construction: 1999, Hydraulic steel bar shears with hole punch Fab. MUBEA Typ. HIW 750/510 Year 1999 Technical data Make Mubea Type HIW 750/510 Year of manufacture 1999 Punching pressure 75,000 kg Max. Hole capacity diam. 30 x 22 mm Stroke 70 mm Max. Stroke rate 42/min. Working radius 510 mm Flat steel 450 x 15 mm / 300 x 20 mm Angle steel 150 x 13 mm Ppodeu Sy Uzopfx Akfor Square steel 44 mm Round steel diam. 50 mm Installation dimensions L 2.0 x W 1.40 x H 1.80 m Weight approx. 2.5 t Equipment - Electrical contact stop 2000 mm - Tool cabinet - Various tools and accessories as per photos All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Ppedpfx Ajxz Ep Djkfsr Assortment of tools is included in the price