Shear

Mubea HIW 750/510

Condition: new, Electrical voltage 400 V Frequency 50 Hz Rsdpjd R Uz Tsfx Aazen N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Rjdet Iklkjpfx Aazsn Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height Rodpfx Ajkvnumsazon 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Rodpfx Aaorz Tutjzon Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) Redpfxed N H A Nj Aazon - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Rodpfxjxqdu Dj Aazjn

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Rsdpfxsw Hca Ho Aazjn Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Rodpewkd Efefx Aazsn Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) Redpfx Aaewcq Hgozjn - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; Rodjucl Dcspfx Aazjn *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.