Used Norgren Ra/8040/M/60 for sale (84,737)

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Godpfxsvwgp Us Akaekb Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m Gedpfxsvcrmvj Akajkb • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: used, Year of construction: 2003, operating hours: 10,000 h, Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) save floor space and simplifies transportation and installation. Upgrade your depalletizing operations with the 2003 Fanuc Robot Depalletizer – the ultimate solution for efficient and effective depalletizing. With a gripper head for depalletizing one layer of bottles at a time (inflatable) Botte holding system: This Fanuc robot depalletizer has a particular bottle gripper: Use the neck bottle gripping system using inflatable bars. This system helps to process shaped bottles and therefore allows them to be deposited on the loading table with irregular bottles. The classic push system has this limitation, it cannot process bottles other than round ones. But the Fanuc robot depalletizer has a speed of 200 layers per hour to a maximum of 12,000 BPH. Another important feature is the space required to work with that equipment, compared to traditional systems at least 50% of the usable surface is saved; for the same performance, a robot is always preferable, also because being able to change the bottle gripper, all types of bottles can be processed with very high peak loads. Gkjdpfxsvgvx De Akaeb  

Condition: used, Year of construction: 2003, operating hours: 10,002 h, Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) saves floor space and simplifies transportation and installation. Upgrade your palletizing operations with the 2003 Fanuc Robot Palletizer – the ultimate solution for efficient and effective palletizing. With gripping head for cardboard Gkedovgvx Repfx Akaob

Condition: used, 454666600000, NORGREN, dosing cylinder, adhesive cylinder and synchronous motor Model: 454666600000 Gkjdpouz D Ndsfx Akasb Condition: Used

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: Gkjdpfxszqggvo Akajb - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, VERTICAL MACHINING CENTER "FAMUP" MOD. MC 120/60 Gsdpoxwclhsfx Akaekb X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rapid traverse X-Y-Z = 40-40-40 m/min Spindle: 12,000 rpm, 22.5 kW ISO 40 - DIN Table size: 1380x600 mm Max. permissible load: 800 kg Tool magazine: Random, 30 positions Control: SELCA S4045 PDH

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog Gsdpfevr Eh Eox Akajkb • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Gksdpfx Akeuqfa Ieasb Load capacity 5000 kg Material width max. 500 mm

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) Gjdpfxjxwmike Akajkb # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Gkjdpfx Akjy N Sdyjajb Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMC 60 T RS 3 Control: Siemens 840 D Year: 2007 new spindle: 2025 Neue B-Achslager Geometrieprotokoll vorhanden Neue Scheibe Neuer Klemmring SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 780 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis Panning head Gedpezi Dy Rjfx Akaekb Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger: Kettenmagazin / chain magazine Tool capacity: 180 Tool lenght: 315 mm NC rotary table Palett size: 630 x 500 mm Palett system Amount of paletts: 5 Equipment Chip conveyor cooling system Internal cooling: 40 bar Air blow Roto Clear

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Gkjdpfx Aoh Rfcnskaeb Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Year of construction: 2006, condition: used, An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement. Gkedpszy Rv Hjfx Akajb

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined Gkodpfx Ajt D Nz Aekaob

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm • Effective spindle length: 600 mm • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm • 2nd profiling spindle diameter: 50 mm • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW Gkodpfxezvcqbo Akajb • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding

Year of construction: 2004, condition: refurbished (used), 2004 Double squaring machine, Friulmac brand, Idramat model Note: see [VIDEO](?share=copy#t=0) Gksdjzz Rnropfx Akajb

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 395.900.219.1159, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table length: 800 mm, overall weight: 4,150 kg, GF AgieCharmilles FORM E 600 – Die-Sinking EDM Year of manufacture: 2019 Operating hours: approx. 900 h The machine is in excellent, fully functional condition. It has been used only for a very limited number of test and trial operations and has never been used for continuous serial production. Gkedpfx Akszyn E Esasb Technical specifications: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 600 mm Maximum workpiece size: 1,000 x 700 x 400 mm Maximum workpiece weight: 1,000 kg Positioning resolution: 0.1 μm Best surface finish: Ra 0.2 μm Generator current: 140 A Dielectric tank capacity: 650 l Integrated C-axis Maximum electrode weight on C-axis: 25 kg Maximum C-axis rotation speed: 80 rpm AC FORM HMI with 19" touchscreen ISPG (Intelligent Speed Power Generator) Glass scales on X/Y axes EROWA ITS-50 automatic chuck Electrode changer Fire protection system 6 integrated filter cartridges Power supply: 3 x 400 V, 50/60 Hz Compressed air: 6–8 bar LAN connection: 10/100 Mbit/s Machine dimensions / weight: Machine height: 2,700 mm Machine weight: approx. 4,150 kg The machine is currently located at our facility in Kocaeli, Turkey and is available for inspection. Additional photos, videos, and further information are available upon request.

Condition: used, Year of construction: 2016, operating hours: 12,415 h, total height: 2,200 mm, total length: 9,050 mm, total width: 1,200 mm, Colour: White Weight: 4.800 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 109/1-606 - Operating hours: 12415 - Number of units [pcs]: 11 - └ 1st unit type: Pre-milling unit Gjdpfozhrlfsx Akaskb - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1914 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: KA701 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1828 - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Type/Brand: FR701 - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Type/Brand: FF701 - - Tools available: Yes - └ 8th unit type: Radius scraping unit - - Type/Brand: ZK501 - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Type/Brand: 1856 - - Tools available: Yes - └ 10th unit type: Brushing unit - - Type/Brand: ES701 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 20 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Max. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Options: Return transport - Voltage [V]: 400 - Current consumption [A]: 45 - Transport dimensions: 9050mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 3,700 h, power: 18 kW (24.47 HP), load capacity: 570 kg, empty load weight: 3,764 kg, Equipment: all wheel drive, Total of 9 diesel-powered, all-wheel-drive scissor lifts, JLG 260MRT model. All manufactured in 2008. Operating hours according to the meter range from 772 to 4,644 hours. 3,764 kg own weight 570 kg lifting capacity 18 kW Kubota engine 9.92 meters working height Work platform is extendable in length ALL-WHEEL DRIVE with outriggers and automatic leveling immediately ready for use including CE certification Gjdpfx Ajzh U Ddokaokb Selling price: €7,700.00 net per unit! Upon request, a new Austrian inspection certificate can be provided before delivery! Affordable delivery also possible!

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Gsdpfx Akoy Hia Teaekb Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Gjdpozyymbefx Akaokb Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Gkedpfozq Eghex Akasb Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun

Condition: used, Field of application: Mining Experience unparalleled efficiency with Polygonmach's Mobile Dewatering Screen and Hydrocyclone, part of our revolutionary range of mobile crushing and screening plants on wheels. Polygonmach, an industry-leading brand, is committed to redefining the standards of construction and mining industries with its cutting-edge technologies. The Polygonmach Mobile Dewatering Screen and Hydrocyclone is an exceptional solution that offers high-efficiency classification and separation of materials, a must-have for operations dealing with a variety of mineral ores, aggregates, and recyclables. This mobile system is crafted to effectively dewater and separate fines, providing a consistent, saleable product. The dewatering screen works by removing the water from your washed sand and other materials, while the hydrocyclone ensures precise and efficient classification and separation. Gsdpfx Aeygga Aekajkb Our hydrocyclone technology ensures precise and rapid grading. Its centrifugal motion enables it to separate heavier particles, improving product purity. This is paired with our dewatering screen that offers high-frequency vibration, ensuring effective dewatering for a dry, high-quality end product. As part of our ethos to deliver user-friendly solutions, the Mobile Dewatering Screen and Hydrocyclone system is designed for easy operation and maintenance. It comes with hydraulic legs for convenient positioning and a robust design capable of withstanding challenging working conditions. What sets the Polygonmach mobile system apart is its ability to deliver high throughput and efficiency while ensuring the quality of the final product. Applications: construction Type: centrifugal, mobile Material: for bulk materials Other characteristics: high-frequency, dewatering, high throughput net weight: Min.: 6,100 kg(13,448 lb)Max.: 10,200 kg(22,487 lb) engine power: Min.: 3.6 kW(4.89 hp)Max.: 9 kW(12.24 hp)

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming Godjzuyk Nspfx Akaskb - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.