Used center lathes 500-599mm turning diameter over bed for sale (126)

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min Podpfxoy Nd Sis Abhopu workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, Year of construction: 1975, turning diameter over bed 0500 mm turning diameter over slide rest 250 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 25- 1250 U/min total power requirement 5 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 1,5 x 1,5 m Ppodpjw H Di Nsfx Abhsu With quick tool change device, chuck and DRO.

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 12- 1150 U/min Podpfsw H Di Aox Abhspu total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm Podpfxet Tqgxo Abhjpu spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 53250 € 1006.43 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 MK 3 25-100; 100-400; 500-2000 U/Min Ppedpfx Aeyq Srfsbheu 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 51870,00 turning length2.000 mm € 55170,00 turning length3.000 mm € 59620,00 turning length4.000 mm € 656,00 turning length5.000 mm € 81110,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 46970 € 897.13 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 MK 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) Pjdpfxswiq Rfo Abhjpu 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53450,00 turning length4.000 mm € 59360,00 turning length5.000 mm € 74840,00

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm Ppsdpfx Abszfnd Sehju internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Ppedonqy Haepfx Abhju Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg Ppsdpfezf Nd Hex Abhju

Condition: good (used), turning diameter over bed 380 mm turning diameter over slide rest 250 mm Pjdpfx Abozd Hf Sjhopu turning length 600 mm turning speeds 90 - 1600 U/min centre height 200 mm total power requirement 4,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Ppjdpfx Absvbquijheu Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Pedjvbqlhspfx Abhspu Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Swing diameter over bed: 520 mm Ppsdpfxoy Iyzqo Abheu Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Podpfx Abey A H Akjhopu Equipment - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm Ppsdpfxjxnqzxs Abhou metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: used, Year of construction: 1972, turning length / mm turning speeds / U/min centre height / mm LÖW Universal Lathe V 1000 Details of Pedpfx Aozcgi Nobhspu Model V 1000 Machine no. HO 1026 Centre height over flat track 500 mm Swing diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face disc diameter 900 mm Max. workpiece weight between centres 5,000 kg max. workpiece weight with 1 vice 6,000 kg max. workpiece weight with 2 setting vices 7,100 kg incl. documentation

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe Ppsdpsha Hvvjfx Abhju -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: used, TECHNICAL DETAILS - Distance between centers : 1800 [mm] - Max. diameter on bench : 583 [mm] - Machining diameter between centers : 280 [mm] - X/Z stroke : 255 / 1710 [mm] - Quill diameter : 100 [mm] - Quill stroke : 295 [mm] MAIN SPINDLE - Spindle nose : A1-8" Pedpfxoy A Tkne Abhopu - Spindle passage : 80 [mm] - Spindle speeds : 0 - 2500 [rpm] - Spindle power : 18.4 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.700 [mm] - Machine height : 1.820 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CN Conversational CAZENEUVE NUM Power - LCD control screen - Multifix Quick-Change Turret - Coolant tank - Chuck 3 jaws - Tool holder set

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Pedpfx Abszgak Tohepu Comes with several accessories.

Condition: refurbished (used), Year of construction: 1984, The lathe has undergone a Retrofit 2025 and is in perfect condition. It has been geometrically overhauled. The bed has been reground, and all guides have been scraped. The headstock and tool post have been disassembled into their individual components, cleaned, and reassembled. Everything has been stripped of its old paint and repainted with a new powder coating. A measurement report is included. The machine weight is 4000 kg. The original documentation and extensive accessories are included. 1 pallet containing approximately 13 Multifix C holders with turning tools is available and is part of this listing! Ppodpfx Aboyutluohsu

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Psdpfx Aeu Ixznjbhepu Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Pjdpfowa Nwfjx Abhopu Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm Pjdpfx Abeqwlmqohjpu machine weight: 3550 kg

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler Ppjdpfegt E Iljx Abheu - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Ppjdpfx Abodvm Euehju Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard