Used Reform Ar101/61 for sale (2,438)

Condition: like new (used), functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Length under head max: 30 mm Dkedpfx Ajthgkqekzjp Speed: 400 ppm

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Dkjdpfertrzdox Akzop The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Dedpswkkpqsfx Akzokp Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and sealing system + rinser, infeed conveyor, and automatic labeling system from the manufacturer ENOS! Note: The seller will handle the dismantling of the machine. The buyer is responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Dkodozh Dtbopfx Akzsp MACHINE DETAILS Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling system

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The printing machine consists of the following modules: Djdjzkhl Tjpfx Akzjkp OCE PAPER INPUT MODULE STANDARD B1 OCE INPUT INTERFACE MODULE B1 OCE PAPER INPUT MODULE OPTIONAL B1 OCE OCE IHCS2.1 SETFIN B2 TECHNICAL DETAILS Dimensions Pal 1051330: H: 114 cm, W: 72 cm, L: 95 cm Dimensions Pal 1051331: H: 113 cm, W: 72 cm, L: 56 cm Dimensions Pal 1051237: H: 147 cm, W: 130 cm, L: 160 cm Dimensions Pal 1051238: H: 192 cm, W: 74 cm, L: 119 cm MACHINE DETAILS Counter reading B/W A4: 458,756 Counter reading Duplex B/W A4: 939,266 Counter reading B/W A3: 151 Counter reading Duplex B/W A3: 5,677

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, power: 1.2 kW (1.63 HP), load capacity: 200 kg, lifting height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 10,000 mm Maximum load capacity: 200 kg Maximum lateral load: 400 N Maximum permissible inclination: 3° MACHINE DETAILS Dedpfeziz Tusx Akzokp Operating hours: 836 h Total weight: 2,735 kg External reference: SL16147SP

Condition: used, from a well-known manufacturing plant in Bulgaria. Dkedjzd Rk Sspfx Akzop

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Multi-functional CNC drilling machine is able to drill from 6 sides. Independent top grooving, 5.5kw main spindle of 4-slot tool changing magzine, and 1 drilling block on top, one drilling block and one main spindle on bottom meet different process requests and gives batch-size-one production max flexibility; Software is open port, support most formats in market. Compact design, save space /// TECHINICAL SPECS Total power - 21.07 KW Machine dimensions - 3962× 3010× 2320mm Power supply - 380 V/50 Hz Air supply 0.6-0.7 MPa SYNTEC control system Panel size Length 200-2,800 mm Dodpfoyi Avfox Akzjkp Width 30-1,220 mm Thickness 10-60 mm Maximum travel speed X-axis/U-axis - 135 m/min Y axis - 75 m/min Z axis - 30 m/min V axis (push) - 30 m/min Drilling blocks Top 1; Bottom 1 Number of vertical drills (top) 1 Number of horizontal holes (top) X: 2*2+ Y: 2*2 Number of vertical drills (lower) 9 Maximum drill diameter Φ35 mm Distance between holes 3 Rotation speed 5000 rpm Shaft diameter Φ10 mm Drill length 7 Main shaft Upper - 1*5.5 kW ER32 ATC4 18000 rpm Lower - 1*3.5 kW er25 18000 rpm Saw blade Power 1.7 kW Dimensions Ф 100* Ф 22* δ 4Center distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz

Condition: new, Year of construction: 2026, functionality: fully functional, ### High-Flexibility Processing for Custom Furniture Production The NANXING ND612DCT is an upgraded industrial CNC center engineered for high-precision six-sided drilling and multi-directional routing. This model is specifically designed to provide maximum flexibility for "Batch Size One" production, allowing manufacturers to handle individual custom orders with the same efficiency as mass production. ### Key Advantages & Technologies Dkodpfx Akeygtidjzop Versatile 6-Sided Processing: Capable of full six-sided drilling, front/back and side grooving, plus front/side routing in a single seamless cycle. Specialized Hardware Support: Pre-configured to process complex joinery and fittings, including Lamello joints, LogiClip connectors, wiring channels, and sky/floor door hinge mortises. Advanced C-Axis & ATC System: Features a 5.5 kW top ATC8 spindle paired with a 5.5 kW C-axis. This configuration includes a 2-slot interchangeable cross-head for 360° rotation and multi-directional side routing. Co-Linear Drilling Efficiency: The top and bottom drilling blocks are aligned co-linearly, significantly increasing processing speeds for through-holes. Industrial-Grade Build: The monolithic frame is stress-relief tempered and processed using precision Japanese SNK equipment to ensure lifetime structural integrity. ### Technical Specifications Panel Dimensions Length: 200 – 2,800 mm; Width: 50 – 1,220 mm; Thickness: 10 – 60 mm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Drilling Configuration | Top: 19 vertical, 32 X-horizontal, 22 Y-horizontal; Bottom: 9 vertical | | Main Spindles | Top: 5.5 kW ATC8 + 5.5 kW C-axis; Bottom: 3.5 kW ER25 | | Control System | SYNTEC CNC on Windows 10 platform | | Total Power / Weight | 29.2 kW / 4,900 kg | ### Standard Features & Smart Functionalities Intelligent Detection System: Equipped with high-precision sensors for automatic detection of panel length, width, and thickness to eliminate operator errors. Surface Protection: Features an automatic feeding and outfeed system with a brush device and conveyor belt to protect delicate or finished surfaces. Smart Tool Management: The user-friendly interface allows for easy tool setup and includes a life-cycle tracking function that alerts operators when tools need replacement. Open-Port Compatibility: Supports all major industry software formats, including MPR, DXF, BAN, BPP, PDX, XML, and XXL. Comprehensive Inclusions: The standard package comes with an overhead barcode scanner, mobile control console, and an air-conditioned electrical cabinet for consistent performance in any environment. ### About the Manufacturer NANXING Machinery (est. 1996) is a world-class leader in intelligent woodworking machinery. With professional assembly lines and rigorous quality control certified by CE specialists, Nanxing equipment delivers standardized performance and extreme durability for modern furniture factories.

Condition: used, Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Dedpfx Aksr E A Tbjzekp Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

Condition: new, Automatic bread cutting machine Automatic bread slicer of modern design is made of stainless steel and fully complies with CE standards It is designed for large capacity and serial bread cutting It has a system for packing sliced bread It is easy to transport as well as to clean and maintain By removing the drawer in the lower part of the machine, the crumbs are emptied so that the machine does not require any additional maintenance Dimensions: 242 × 75 × 135cm Dksdsuu A Ukspfx Akzjp Electrical power: 0.85kW Weight: 312kg Capacity: 1500 loaf / h Slice thickness: 6-15mm

Condition: used, Professional vacuum filler Handtman VF 610 is designed for precise filling, dosing and portioning of meat mixtures in the meat industry, processing plants and professional production lines. This model is an ideal solution for users who require high capacity, premium precision and reliable operation in daily professional use. The vacuum operating system enables uniform filling without air pockets in the mixture, improving product texture, final quality and shelf life. The machine is especially suitable for the production of sausages, pâté, burgers, cevap products and other meat items. Model VF 610 offers portioning speed up to 450 portions per minute with high accuracy. Maximum productivity of up to 3000 kg/h allows efficient operation even in demanding production conditions. The unit is controlled via a touch panel for easy operation and quick parameter adjustment. Dodpfx Ajy I Acdjkzjkp The construction is made of high-quality stainless steel, ensuring long service life, high hygiene standards and easy maintenance. Technical specifications: Machine type: Vacuum filler Manufacturer: Handtman Model: VF 610 Hopper capacity: 100 / 40 L Productivity: up to 3000 kg/h Portioning speed: up to 450 portions/min Portioning range: 5 - 99999.9 cm3 Filling pressure: up to 50 bar Power: 3.5 kW Voltage: 400 V / 50 Hz / 3N Dimensions: 1900 x 700 x 850 mm Weight: 500 kg Material: Stainless steel Control system: Touch panel Application: Filling and portioning meat mixtures Use: Meat industry, meat processing, professional production Operation: Precise, fast and reliable Maintenance: Easy and simple

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized Dksdpsyn Uhwofx Akzjp • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Dsdpfoyqdtbsx Akzskp Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Dkedpfetp S E Esx Akzop Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: ready for operation (used), Lathe, Lathe CA6140, used machine Djdpfx Aexacx Hokzokp Overall dimensions: 2700 × 1140 × 1750 mm Power rating: 7.5 kW Swing over bed: 400 mm Swing over carriage: 210 mm Distance between centers: 1000 mm Spindle speed: 16–1400 rpm (24 steps) Bed width: 400 mm Tool shank size: 25 × 25 mm

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Dkodpszgda Sofx Akzjp Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, This is an UltraVent Plus hood from the premium manufacturer Rational, type UVP 61/101E. This hood is suitable for the iCombi device sizes 6-1/1 & 10-1/1 in electric version. Thanks to condensation technology, the UltraVent binds escaping steam. An external connection or extension of an existing exhaust air system is not required for this recirculating hood. In addition to the UltraVent's condensation technology, the UltraVent Plus is equipped with a special activated carbon filter technology. This allows not only steam to be condensed but also reduces annoying smoke, such as produced during grilling and frying. RATIONAL cooking systems can thus also be installed in sensitive areas, e.g., in the front area. The hood has been checked in our in-house workshop and is fully functional. New activated carbon filters were installed during inspection. The stated price is net plus 19% VAT. The RRP for this hood is €6,921 net. Service: We are happy to arrange a certified Rational customer service for you throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to an extensive range of used and new goods. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our device service for you • 6 months warranty on all electrical parts • High-quality branded devices at fair prices • Professional overhaul / inspection & expert cleaning • Checked & fully functional - or money back • Shipping or self-collection flexibly selectable • Competent advice - before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • External dimensions WxDxH: 854x886x390 mm • Electrical connection: 1NAC 230V 50Hz 0.17kW • Serial number: ET1PA22095059173 • Year of manufacture: 2022 • Maximum extraction performance: 705 m³/h • Operating noise: Average: 50-65 dB(A) Condition: Used, checked, and fully functional. SHIPPING: • Delivery or self-collection by arrangement • Worldwide shipping on request Dodpfx Asu Hzywskzskp • Shipping to islands or mountain stations only by arrangement Do you have questions, want advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: excellent (used), functionality: fully functional, power: 18.2 kW (24.75 HP), overall weight: 2,600 kg, Year of construction: 2016, operating hours: 3,981 h, Equipment: quick-change device, rubber tracks, Kubota KX61-3/with quick coupler/grading blade/3981 h/2 buckets • Manufacturer: Kubota • Model: KX61-3 • Year of manufacture: 2016 • Power: 18.2 kW / 25 hp • Operating hours: 3981 h • Engine: Kubota V1505 • Quick coupler – Kubota KS 03 • Grading blade Dsdpsymmf Sofx Akzskp • Fast/slow travel • Rubber tracks • Red Kubota key • Total weight: 2600 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale according to our General Terms and Conditions.

Condition: new, Ebara CDXHSM/A 70/05 centrifugal pump, serial number: 1615054900, unused, 100% functional, scope of delivery as shown in the photos. Dksdpfx Akjzkc Uvezsp

Condition: new, Brinkmann TB100/350+001 submersible pump, serial number: 061380443126920001, unused, 100% functional, scope of delivery as shown in the photos. Dodpfjzkc Uiex Akzskp

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Djdpfeym Ig Dox Akzjkp

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. Dodpszi Avdsfx Akzskp • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: used, empty load weight: 4,880 kg, maximum load weight: 5,620 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL1500 S tail lift, load capacity 1,500 kg, with own batteries, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dedpjzikvrjfx Akzjkp

Condition: reconditioned (used), Year of construction: 2017, operating hours: 461 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 606 kg, warranty duration: 12 months, water tank capacity: 120 l, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 year of manufacture and 461 hours of operation 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, grease and petroleum derivatives. Built-in battery charger makes everyday use easier New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready for work (kg): 620 Gradeability (%): 11 DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW suction hose NEW head protective rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface Dkedpfx Akewpr Huszsp The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.