Vertical band saw

MIOTAL® VBS 610

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Nodpfxetwz Tls Adwecl incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed Ncjdsuhabtepfx Adwsl - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: used, roll diameter / mm throat / mm Nsdsuddmropfx Adwecl workpiece height / mm Table dimensions: 615x615mm

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Njdpfx Ash Rvxhodwjcl Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Ncodpjwhn T Uofx Adwsl

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop Nodpfxjm Rlb Ne Adwscl coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Year of construction: 2025, Top height 250 mm Ncodpfed I A Auox Adwel Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Nedpfx Adocirniowscl Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Ncedpfxen E Ni Hj Adwjl

Condition: excellent (used), turning length: 5,500 mm, Make: WEIPERT Type: W1400 Control: R&D MTC3 DBC Turning Length: 5500mm Swing over bed Ø: 1400mm Nsdpfowzhzlox Adwjcl Swing over cross slide Ø:960mm Length: 9000mm Width: 2900mm Height: 2900mm Weight: 32000kg