Used Robust Sd900 for sale (5,161)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Dsdpfx Aeq H Sqdjp Dewc Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine Dodjz N Hxhspfx Ap Djwc - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, Bosch Rexroth 5.5 kW industrial hydraulic power unit with Lammers motor, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Work Order No.: 3285684/30 Type: RRG Conversion Year of Manufacture / Week: 2011 / Week 20 Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HV 46 Design: Robust blue-painted steel hydraulic tank with oil level indicator and inspection/cleaning opening. Operating Pressure: 80 bar Maximum Pressure: 160 bar Dsdpszzc S Nefx Ap Djwc DRIVE MOTOR: Manufacturer / Brand: LAMMERS Elektromaschinenfabrik (Rheine, Germany) Type: 12AA 132S-4 Power: 5.5 kW (50 Hz) / 6.05 kW (60 Hz) Speed: 1440 rpm (50 Hz) / 1725 rpm (60 Hz) Voltage: 400/690 V (Δ/Y) Current: 11.3 / 6.55 A Protection Rating: IP55 (Class F insulation) OVERALL DIMENSIONS: Width: 770 mm Depth: 580 mm Height: 1400 mm

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. -Flattening Gap Adjustment: Servo Hydraulic with PLC Control Dwodpfx Apjkyrphj Dec -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm -Total Weight: 40.000 kg..

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 30,00,12,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: Dsdpfx Apez Eq H Hj Djwc * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Application areas: * Cutting of mild steel * Cutting of stainless steel * Cutting of aluminum * Cutting of structural elements * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, input current: 380 A, type of input current: three-phase, overall weight: 8,350 kg, total length: 3,980 mm, total width: 1,820 mm, total height: 2,880 mm, pressing force: 100 t, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, operating speed: 180 mm/s, reverse speed: 180 mm/s, throat depth: 450 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The TPM8 is designed for maximum productivity and ease of operation. With its robust and rigid frame construction and automatic job preparation, you can achieve precise results quickly. In addition, customizable tooling kits enable a fast start-up, ensuring you get the best value for your investment. * Best price-performance ratio Dsdpfx Asz Eq Nzjp Dewc * Easy operation * JFY BEND - Offline programming * Maximum safety * Application and local service * Bending tools 2D - Graphic programming 3D - Graphic programming 3D - Bending simulation !!!Individual machine configuration possible according to customer requirements, as well as additional equipment!!! Machine pressing force from 60t to 320t possible. We are always available to provide detailed quotes, technical specifications, and delivery terms.

Condition: new, functionality: fully functional, container length: 40 ft, overall weight: 3,900 kg, loading space width: 2,400 mm, loading space length: 12,000 mm, loading space height: 2,900 mm, 40-foot High Cube Sea Container (One-Way) – Maximum storage space. Ready for immediate use. In a modern anthracite gray! Are you looking for an extremely robust, spacious, and weatherproof storage solution for your business or private property? This 40-foot High Cube container impresses with its like-new condition, having been used only once for transport to Europe (One-Way), and offers approximately 10% more volume than a standard container thanks to its High-Cube design. With a length of over 12 meters and a comfortable interior height of approximately 2.70 meters, this container provides enormous space – perfect as a secure storage area for materials, tires, archives, an XXL workshop, or as a solid foundation for modular construction. The timeless anthracite gray finish (RAL 7016) is an absolute bestseller and blends discreetly and modernly into any environment. Inspection and pickup are possible at any time by arrangement. 🔹 HIGHLIGHTS & DATA AT A GLANCE Model: 40-foot High Cube Sea Container Condition: One-Way (Like-new, used once for transport to Europe) Certification: Valid CSC plate (approved for worldwide shipping) External dimensions: 12,192 mm x 2,438 mm x 2,896 mm (L x W x H) Internal dimensions: 12,032 mm x 2,352 mm x 2,698 mm (L x W x H) Door opening: 2,340 mm x 2,585 mm (W x H) Color: Completely in modern anthracite gray (RAL 7016) Construction: Robust Corten steel – absolutely wind and waterproof, extremely durable Floor: 28 mm thick, water-resistant plywood or bamboo floor (high load capacity) 🔹 CAPACITY & LOAD CAPACITY Load volume: approx. 76.4 m³ Unladen weight (tare): approx. 3,900 kg Max. payload: approx. 26,600 kg Max. total weight: 30,480 kg 🚚 DELIVERY & PAYMENT Fixed price: 3,800 EUR (plus statutory VAT, ex-depot) Delivery: Fast, nationwide delivery by truck (special vehicle with or without crane unloading can be added as an option) Payment options: Bank transfer (payment in advance / on invoice) Other payment methods available upon request 📞 REQUEST A NO-OBLIGATION QUOTE NOW! Get free advice! Dsdpfxjz Et Igs Ap Dowc Write to us directly via online classifieds or call us – we will create a customized offer for you, including transport costs to your desired location.

Condition: new, Catalog number: S097 ADVANTAGES – New machine, in stock – Shaft width 530mm – 4-knife planing shaft – Upper control panel – Long work surfaces – Noise-reducing comb near the shaft – 5.5kW motor – Robust construction TECHNICAL DATA Working width 530 mm Dimensions of the work table 2900 x 540 mm Max. machining depth 8 mm Spindle speed 4700 rpm Diameter of the milling head 125 mm Number of knives 4 pcs Dimensions of knives 540x35x3 mm Dodpsztatbjfx Ap Djwc Dimensions of the cast iron bed 1500x155 mm Motor power 5.5 kW Suction 160 mm Weight 800 kg Net price: 27,000 PLN Net price: 6,280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Technical details: cutting diameter: 280 mm saw band length: 3660 mm saw band width: 25 mm Cutting height: 280 mm application:: Metallsägearbeiten cutting width: 400 mm cutting speed: 35 - 70 stepless m/min machine weight approx.: K.A. kg Dsdpfou Nih Iox Ap Dewc dimension machine xH: 1,4 x 1,8 x 1,2 m robust and accurate automatic band saw miter cut possible incl. roller conveyor with access approx. 6000mm and exit 3700mm *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) Dwsdpfx Apju Nfmyo Djc *

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Dwjdpfxsyt I Axj Ap Djc Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad Dodpfxoy Rm T Ee Ap Djwc band speed: 27 - 2200 m/min table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine approx.LxWxH: 1,82 x 0,97 x 2,55 m Machine is sold without electrical control cabinet! This machine was integrated into a production system and operated as part of a larger manufacturing process. The Mössner Rekord SSF 630 is a heavy-duty vertical industrial band saw designed for metal and special materials. It belongs to the renowned REKORD series by Mössner (Germany) and is considered an extremely robust and precise machine for workshop and industrial applications. The SSF 630 is suitable for sawing: ·Steel ·Stainless steel ·Aluminum ·Tool steel ·Plastics · Special materials *

Condition: used, Technical details: table length: 1000 mm table width: 1000 mm weight of the machine ca.: 0,531 t space requirements of the machine approx.: 1,0x1,0x0,8 m marking plate is on a robust welding construction 60mm steel angle. Dwodpfx Aju Nkkkjp Djc *

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Djdpjz D Th Dofx Ap Dowc Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 590 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers * Integrated ramp rail in every standard version Dwedpoyn Ub Djfx Ap Djc * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Dwjdpfx Apoyn Ucbe Doc Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 28,00,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition Dodpfx Apjyhfm Dj Dswc • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, emission class: euro5, shovel volume: 0.6 m³, digging bucket width: 167 mm, operating hours: 1 h, Equipment: cabin, pallet forks, rubber tracks, standard shovel, Model: FARMER 815 The FARMER 815 is the ideal machine for agricultural, construction, electrical, plumbing, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period expires. The wheel loaders are built under the supervision of European engineers, ensuring high production standards. The equipment is constructed on a robust chassis and is designed to operate reliably under all conditions. The comfortable, glazed cabin ensures safe and convenient operation. Dsdpswzhxksfx Ap Djwc DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL SPECIFICATIONS: Engine: Yunnei, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 18.8 kW at 2400 rpm Battery voltage: 12V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brake OPERATING PARAMETERS: Lifting height (bottom edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (at 45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket capacity: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lifting time: 4 s Total boom cycle time: 7 s Fuel tank capacity: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick coupler system * Dual hydraulic circuit * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lighting PRICE: €18,000 net €21,420 gross KINGWAY DEUTSCHLAND is the only official stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and serve as the main branch of Kingway in Germany. We have a huge selection of equipment in stock, with around 100 machines available at any time. We deliver throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. For our customers, we also provide access to all spare parts and mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Dwjdpfoz Eai Rsx Ap Doc - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Condition: new, Double deck screener, possibility of delivery with petrol generator, low operating costs, easy exchange of the meshes, robust dimensions, screening surface of more than 6m2, the meshes made of high-quality spring steel. Dwsdpfx Aoz Hx I Isp Djc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line Dwodpsz Hzbdjfx Ap Dec

Year of construction: 2011, condition: used, functionality: fully functional, This is a combination oven/steamer, model CMP 101, from the premium manufacturer Rational, in an electric version. The unit has been completely refurbished in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer but can be purchased as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types. This unit is the optimal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Djdpfx Apjzu Rulj Dowc Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH11122284737 Year of manufacture: 2011 Condition: used, refurbished, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and cooled dishes to the ideal serving temperature in the optimal climate Automatic separation of grease for clean cooking chamber air Manual cleaning program 5 air speeds: Whether gentle or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swivels for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of a sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min Dwsdpfx Apjz Hwgpo Djc • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor

Year of construction: 2012, condition: used, functionality: fully functional, This is a combination oven/steamer CMP 101 from the premium manufacturer Rational, in an electric version. The unit has been completely overhauled in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. Djdpfx Apez Hwpds Dowc The base shown in the picture is not included in the offer but can be purchased separately as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. This unit is the ideal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without any installation or removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10x1/1GN Weight: approx. 132 kg Serial number: E11MH12112329081 Year of construction: 2012 Condition: used, completely overhauled, fully functional Further details: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and cooled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,600 mm, total width: 1,180 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features • Open back frame design • Heavy-duty steel construction • Fixed working table • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Slide balancing device • Integrated safety valves • Manual controls • High productivity • CE certified Technical Specifications • Press force: 40 t • Stroke under nominal load: 6 mm • Slide stroke: 120 mm • Strokes: 55 strokes/min • Maximum die height: 220 mm • Die height adjustment: 80 mm • Throat depth: 260 mm • Working table: 710 × 480 mm • Table thickness: 80 mm • Table hole diameter: Ø180 mm • Bed opening: Ø200 × 150 × 300 mm • Slide surface: 320 × 270 mm • Maximum frame inclination: 25° • Distance between columns: 300 mm • Punch hole diameter: Ø50 mm • Punch hole depth: 70 mm • Motor power: 4 kW • Machine dimensions: 1600 × 1180 × 2310 mm • Machine weight: 3580 kg Standard Equipment • Light curtains • Mechanical safety guards • Lower table ejector • CE Declaration of Conformity • Technical documentation Applications • Punching • Stamping • Bending • Forming • Sheet metal production • Metal fabrication workshops • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Dodpfxeytdl As Ap Dswc Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.