Used Rox Dust Extraction Blower 0.4 Kw for sale (40,990)

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Njdpfxjib Dadj Ab Uolg The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Nledpfx Abezq A Ezj Uog Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Nlodjhm E S Aopfx Ab Ueg Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system Nljdezizz Sspfx Ab Ueg 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2020, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm Nsdpfxsxpfyle Ab Ujlg -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm -Weight: 245 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm Nlodpfx Asfdmg Sjb Ujg -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Condition: good (used), Storage location: 3129 Nledpfx Aszmaw Heb Ujg Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Chip capacity: 2 x 250 liters Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system Nlsdjzcgbxopfx Ab Uog

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Nlsdpfx Abexbf Rbe Ueg Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning Njdpfx Absu R S A Re Uelg - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Nedpjxf Up Iofx Ab Uelg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm Nedsv Ni Uwjpfx Ab Uslg -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Nlodpfoyi Efcsx Ab Ueg Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan Njdpfx Aey Uxmxeb Uolg -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW Nsdpfx Abon Srvye Uolg -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Condition: used, machine/vehicle number: 0940, without hall piping Nlsdpfx Abjrz Iq He Uog

Condition: used, Year of construction: 2022, Suction nozzle diameter: 350 mm Volume flow: 6927 m³/h Volume flow monitoring: pressure difference indicator Negative pressure: 2543 Pa Filter area: m² Residual dust content: less than 0.2 mg/m³ Nlodpfx Aez A D U Esb Ujg Sound pressure level: 65 dB Filter cleaning: pneumatic, jet cleaning Motor power: 11 kW Frequency inverter: yes Machine length: Machine width: Machine height: Weight:

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Nlodpfx Ajx U Amiob Ueg Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Nljdpfx Aerw A U Ieb Ujg Cartridge dust extraction system -Manufacturer: Coral, Dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! Njdpfsznibwjx Ab Uelg International shipping costs available upon request!

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Njdpfjx Ux E Iox Ab Uelg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm Nlodeypu Uyopfx Ab Usg -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Condition: used, Technical specifications: Filter bag diameter: 6 x 600 mm Collection bag diameter: 6 x 600 mm Dust extraction port: 300/250 mm Nsdozhuf Ispfx Ab Uelg Power supply: 380 V Motor speed: 2800 rpm Motor power: 5.5 kW Overall dimensions: Length: 4700 mm Width: 1100 mm Height: 1100 mm

Condition: used, volume flow: 930 m³/h, intake manifold diameter: 180 mm, filter area: 17.6 m², nominal power: 15 kW (20.39 HP), Kiekens filter including filter bags (used) Separate fan unit with matching ductwork from filter to fan. filter surface area 17.6 m² 15 kW fan 32.0 kPa max. 930 m³/h max. mechanical cleaning: 0.25 kW Njdpsw Rbwwjfx Ab Uolg 1.1 A 690 rpm

Year of construction: 2018, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, radial fan pressure blower from friction disc friction washing system -Type: WTG75-15-500 -Motor: Unitec 15 kW / 2930 rpm Nljdpezlqk Isfx Ab Uog -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Blower dimensions: 1000/820/H1100 mm -Dimensions of base: 805/1210/H1425 mm -Weight: 358 kg