Used Rps Flexy for sale (154)

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Bdedezg Ty Uepfx Af Ajh Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000/6000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications Bsdpsx Uwp Eefx Af Ajdh • Winter road maintenance and snow control • Airport runways and taxiways • Anti-icing and de-icing operations • Highway and municipal street maintenance • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: excellent (used), FLEXIBLE CNC DRILLING AND MILLING LINE, for drawer fronts (or similar panels) 231200A) Automatic panel loading system, with “KUKA” robot, Mod. KR 120 R3200 PA 231200B) “COMEC” CNC machining centre (panels through-feeding) Mod. Frontal 1000 3S CN CA Gantry (Portal) CNC machine - Overall integral safety cabin (enclusure) of the machine Movable panel (workpiece), horizontal position - Movable working head Panels (workpieces) feeding by motorized belts In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) Bdjdpfx Aozxn Nzsf Ajh Minimum workpieces dimensions (X - Y - Z) mm 250 x 50 x 15 Maximum workpieces dimensions (X - Y - Z) mm 1100 x 350 x 30 Total installed power (Kw) 28 (ca.) WORKING GROUPS 1st station: upper vertical CNC drilling (point-to-point) 2nd station: CNC milling for slots/grooves (with horizontal electric spindle) 3rd station: 2 upper vertical CNC drilling units (point-to-point) 4th station: lower vertical CNC drilling (point-to-point) 231200C) Automatic panel unloading system, with “KUKA” robot, model KR 120 R3200 PA

Year of construction: 2016, condition: good (used), Retigo O2021ic Combi oven Bdjdpsrywvasfx Af Aeh 2016, RP Series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Dowels Inserting (Fitting insertion). With BECKHOFF Numerical Control Composed by the following machines: A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system Bdedjm Uyngspfx Af Aeh D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system E) 4th FLEXIBLE CNC Mod. BMA-DLS for drilling, montage, glue application and insertion F) Connection TRANSFER G) In-feed and rotating system RWA/RWZ- CNC H) In-feed and rotating system ZWA-1- CNC I) CARCASE CLAMP PRESS Mod. KP-3- CNC, through-feed system L) Out-feed transfer

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. Bdodpfot N Ty Tjx Af Aeh ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: used, mileage: 6,43,089 km, power: 360 kW (489.46 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Structure: - Palfinger roll-off tipper, extendable * Model PST 18 TEC * Radio remote control * Additional work lights Equipment: * M-Cab * Leaf-air suspension * Leading axle liftable and steerable * 40mm towing hitch with continuous braking system Bedpfoy E A Rvox Af Ajdh * Air conditioning * Auxiliary heater * Heated driver's comfort seat * Sun visor * Rear window * Roof hatch Technology: * Electrically adjustable and heated exterior mirrors * Central locking with remote control * Navigation system * USB Safety/Environment: * Brake system with ABS and ASR * Lane departure warning assistant * Rear axle differential lock * Emission standard Euro 6 Miscellaneous: * German first delivery * 1 previous owner * Payload 13,700 kg according to ZLB (without container) * Permissible total weight 26.00 t * Permissible combined weight 44,000 kg Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, ranging from vans and commercial vehicles to construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we are happy to prepare an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible for an additional fee. The information provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to error and prior sale.

Condition: good (used), Year of construction: 2018, operating hours: 8,053 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, front tire size: 13/7-8-286, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Front tyre size: 13/7-8-286 Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good = Additional options and accessories = - Sideshift = Remarks = Flexi Bendi AC1200 – Year of construction 2018 – 8053 hours 7.85 meter lifting height – Electric narrow aisle truck with side shift Are you looking for a compact and versatile narrow aisle truck for efficient warehouse use? This Flexi Bendi AC1200 from 2018 with 8053 hours is electrically powered and equipped with a powerful 48V / 775 Ah battery. Thanks to the Quattro mast, sideshift and small turning circle, this truck is ideal for narrow aisles. With a lifting height of 7.85 meters and a lifting capacity of 2000 kg, this truck is suitable for various warehouse applications. The machine is in good condition, is CE-certified and is delivered without a battery charger. Specifications: Bodpeydprcefx Af Aedh Year of construction: 2018 Hours: 8053 hours Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 2.74 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 2x4 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: good (used), Krauss-Maffei SPA 12/25 RP  Manufacturer: Krauss-Maffei  Type: SPA 12/25 RP Type: Hydraulic power unit  Complete factory closing, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Bedpfx Afshvml Do Ajdh Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam Bdsdocrtlijpfx Af Ajh start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Bdjdpev Ivuusfx Af Aeh Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Bsdpfx Afsyaimlj Asdh Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. Bjdpfx Aox Utyyjf Aodh The control has a memory with 5 values for faster and more precise work on the machine. The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50mm Shaft length: 600mm The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: good (used), Year of construction: 2018, operating hours: 7,931 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good Condition CE type: CE Flexi Bendi – Year of construction 2018 – 7921 hours 7.85 meter lifting height – Electric narrow aisle truck with sideshift Are you looking for an efficient and compact narrow aisle truck for intensive warehouse use? This Flexi Bendi from 2018 with 7921 hours is equipped with a powerful 48V / 775 Ah battery and a Quattro mast. Thanks to the small turning circle, sideshift and low drive-through height of only 1.92 meters, this truck is perfectly suited for use in low and narrow aisles. The lifting height is 7.85 meters and the lifting capacity is 2000 kg. The machine is in good condition and is CE certified. Bodpfjydpriex Af Aedh Specifications: Year of construction: 2018 Hours: 7921 hours Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 1.92 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 4x2 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TEG802P3-20 - 2200415661, cooling capacity: 152 kW (206.66 HP), type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, pressure: 6 bar, temperature: 7 °C, volume flow: 25.9 m³/h, pump pressure: 3.15 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 12 months, protection type (IP code): IP54, Equipment: cooling unit, type plate available, Sales exclusively to customers with a German billing and delivery address! Process chiller/cooling unit/chilled water set, air-cooled, Type: TAE G 802 P3-20 (R454B) Bsdpfszrw Hpox Af Ajdh MTA S.p.A. TAE G 802 P3-20 are air-cooled, compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, integrated P3 circulation pump, and winter package -20°C. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 152 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 25.9 Available pump pressure (bar) 3.15 Ambient temperature (°C) 32 Refrigerant R 454B Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 79 Max. current (A) 142 Starting current circuit (A) 286 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200415661 Year of manufacture: 2024 Condition: Visually 1, Technically ok (Warehouse stock, as new) Price: upon request Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump Bedpfx Ajztpp Ejf Aedh -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Bedpot N Ix Rofx Af Aedh Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Bjdjyyn Rwopfx Af Aodh Location: Europe _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. Bdedpoxv R Rcefx Af Aoh During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible.

Condition: used, Multi-speed machine with flexible shaft, BIAX Type MB 4-2 Machine No. 9/50/55, Year of manufacture approx. 1970 Length of flexible shaft: 2 meters Speed: 900 - 9000 rpm, infinitely adjustable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 hp Power connection: 380 Volts, 50 Hz Bdodpofim Tisfx Af Aeh - Handheld straight grinder with collet Ø 6 mm - Swiveling and rotating base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg Good condition Universally suitable for milling, grinding, and polishing operations.

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp end, pipe bend, weld bend, pipe angle -Pipe bends: 90° welding bends, 13 pieces -Type: RP CH WPD 139.7x4 30360 9 pcs. -Type: SF RO EN2 A... 139.7x4 P235 GHTC1 4 pcs. see photos -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/750/H140 mm -Weight: 78 kg with pallet Bdedpfsq N E Rbsx Af Aoh

Condition: like new (used), functionality: fully functional, load capacity: 30,000 kg, fuel type: electric, construction height: 180 mm, overall weight: 800 kg, JUNG JLA 15/30 G Heavy-Duty Transport System Up to 30 tons Professional heavy-duty transport system for moving machinery up to 30 tons. A professional JUNG heavy-duty transport system is available for rent for the movement, installation, and relocation of heavy machinery and equipment. The system consists of an electrically powered heavy-duty transport system JUNG JLA 15/30 G and two rigid heavy-duty transport systems JUNG FB 15 G. The electric transport system has a load capacity of 15 tons. In combination with the two rigid heavy-duty transport systems, the complete system is designed for a total load capacity of up to 30 tons. Application areas • Machinery relocation • Production line relocation • Installation and removal of machine tools • Presses and injection molding machines • CNC machining centers • Transformers and switchgear cabinets • Industrial plants and special machines Scope of delivery • 1 electric heavy-duty transport system JUNG JLA 15/30 G • 2 rigid heavy-duty transport systems JUNG FB 15 G • 2 foldable transport beams (working length approx. 2,400 mm) • 4 hydraulic machine jacks JUNG JH 10 G plus (10 t) • 4 pump levers • Tele Radio remote control with carrying strap • 2 spare batteries for remote control • Charger for remote control • Drive battery 48 V / 60 Ah • Battery charger 48 V / 50 A • 12 load distribution plates • 2 wire rope lifting slings • Crowbar Transport data Package 1: Wooden crate with accessories (1,200 × 800 × 1,150 mm), approx. 380 kg. Package 2: Pallet with electric transport system incl. drive battery (1,200 × 1,200 × 400 mm), approx. 350 kg. Total weight: approx. 730 kg. Rental conditions • Rental exclusively to commercial customers. • Return in complete and cleaned condition. • Missing or damaged parts will be charged at the replacement cost. • The lessee is liable for loss and damage during the rental period. • Operation exclusively by qualified personnel. • Manufacturer: JUNG Hebe- und Transporttechnik GmbH • Type: JLA-e 15/30 G (without lifting function) • Year of construction: 2017 • Electric transport system: 15 t load capacity • Total system: up to 30 t total load capacity • Control: Tele Radio remote control • Drive battery: LiFeMnPO₄, 48 V, 60 Ah, 2.88 kWh • Charger: AXIMA FLEXIS 48 V / 50 A Electric drive system Bjdpfezi Dhuox Af Aodh • Dimensions: approx. 1,215 × 835 mm • Height: 180 mm • Weight: approx. 198 kg (without battery) • Travel speed: 6.5 m/min • 16 polyurethane rollers Ø 140 × 59 mm • Turntable support Ø 215 mm Rigid transport system JFB 15 G • Load capacity: 15,000 kg • Height: 180 mm • Transport system cassette: 460 × 205 mm • Support area: 220 × 120 mm • Adjustment range: 415–1,300 mm • Weight: approx. 68 kg

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Water head lift 45m Cooling capacity 5.1kW Refrigerant R-410A Pin diameter 1/2" rp Bdodpfxov Aipno Af Ash Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Bdjdeflq Spopfx Af Ash Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP-S -Platform: 2500/1250/H345 mm -Load capacity: approx. 2000 kg Bdsdsl Sr Alepfx Af Aeh -Tires: solid rubber -Number: 2x transport trolleys available -Price per piece -Transport dimensions. 2500/1250/H345mm -Own weight: 100 kg/pc.