Used Screw Compressor S016003 for sale (7,475)

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) Godszu Inpopfx Aatsbt FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: used, Year of construction: 2016, Rated power: 132.0 kW Engine speed: 1,492 rpm Maximum operating pressure: 8.5 bar Ambient temperature: 3-45 °C Gbodpfx Aajzwgbajtst Operating hours (display): Approximately 64,834 hours / Load: Approximately 64,658 hours

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Gsdpow U U Scefx Aatjbt Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER Gbsdpfsychbaex Aatet SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 POWER (kW) 181 Gbodpezq An Njfx Aatjt OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: Gbodpfx Aajzv Ei Hotet * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: excellent (used), Year of construction: 2006, Kaeser, 15 kW, 8 bar. Gsdpfx Aeztb S Ssatjbt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! Gedpfx Aaezwmlrotsbt The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: like new (used), Year of construction: 2026, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 3 Year 2026 Gbsdpfjyw Nurox Aatot Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Compressed air outlet: 1 1/4" Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ATLAS COPCO GA22VSDFF screw compressor, machine with inverter and air dryer, after service. Gbjdpfx Aezmt Hujatst Technical data: capacity: 3840 m3/min; engine power: 22 kW; maximum pressure: 12.80 bar; year: 2007 operating hours: 11469 Price: 19800 net Price: 24354 gross Compressor in full working order, ready for operation, warranty provided. We also provide service. Link to video below.

Condition: excellent (used), Year of construction: 2019, S016950 PROD. ALUP TYPE LARGO37 S/N API588037 Gbsdpfszuc S Ajx Aatot YEAR 2019 POWER (kW) 37 CAPACITY (m3/min) 6.66 DISCHARGE PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-TANK MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED WARRANTY ON THE SCREW COMPRESSOR STAGE - 6 MONTHS!!!

Condition: used, Year of construction: 2005, feed pressure 10 bar Gbsdpfevuz Rhjx Aatjt liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) Gbsdpeyll Enjfx Aatjt noise level: 62 ± 2 dB(A)

Condition: excellent (used), Year of construction: 2006, Kaeser, 15 kW, 8 bar. Gjdpfx Ajztb Tvoatsbt

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Gjdpfozu Aibox Aatobt Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: new, Year of construction: 2026, CORMAK THEOR H1515.8 COMPACT Screw Compressor with Integrated Air Dryer The CORMAK THEOR H1515.8 COMPACT screw compressor with an integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. CORMAK THEOR H1515.8 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1515.8 COMPACT screw compressor is an excellent choice, designed specifically for precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,700 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1515.8 COMPACT screw compressor reaches a maximum operating pressure of 15.8 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters Godpfx Aaemrmy Aetjbt ✅ Pressure: up to 15.8 bar ✅ Air output: up to 1,700 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,700 l/min Output at 6 bar 1,650 l/min Output at 8 bar 1,500 l/min Output at 10 bar 1,500 l/min Output at 12 bar 1,350 l/min Output at 14 bar 1,350 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CREEMERS RCB15/13 screw compressor, serviced. Technical specifications: Capacity: 1620 L/min; Engine power: 15 kW; Pressure: 13 bar; Operating hours: 352h!!! Year: 2019; Compressor is in fully working condition. Net price: 13,200 PLN Gross price: 16,236 PLN Gsdpfjzmti Nox Aatsbt Video available below.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, GRASSAIR RLR 40E V9 screw compressor (ATLAS COPCO screw module), machine with frequency converter, recently serviced. Gbsdozmt Daepfx Aatst Technical data: capacity: 5.60 m3/min (5600 L/min); 30 kW motor; maximum pressure: 9.7 bar; operating hours: 8126 h; year: 2011; compressor in fully working condition; net price: 13,200 PLN gross price: 16,236 PLN Link to video below.

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Gjdozwxp Aopfx Aatebt Serial number: 202210301 Operating hours: 1,160 h Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Pressure vessel Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. Gbedpfxjzhux Is Aatst The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Gbodpjzhw Rtsfx Aatst

Condition: ready for operation (used), Year of construction: 2000, We offer Atlas Copco compressors: Type GA 55 Pressure: 10 bar Motor power: 55 kW Year of manufacture: 2000 Compressor with documentation Godpfx Aezvx Treatebt

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, For sale: SCS 30-08A screw compressor. In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. Gbjdpfx Aezhux Ujatst The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Gbsdewrrgmepfx Aatot Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – Gbodsy Dp Swepfx Aatjt ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017