Used machining centers (universal) over 1000mm X-axis travel for sale (142)

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel ranges Travel range X: 1350 mm Travel range Y: 970 mm Travel range Z: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 Kg Horizontal/Vertical Milling Support Working spindle Diameter at the front bearing: 110 mm Drive power: (60% ED) 30 kW Drive power: (100% ED) 29 kW Torque: (60% ED) 1088 Nm Torque: (100% ED) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece mass incl. fixture up to speed of 60 min-1 2000 kg Workpiece mass incl. fixture above speed of 60 min-1 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100%ED) 57 kW Drive torque (100%ED) 2520 Nm Machine is equipped with an automatic imbalance detection system Tool changer: 60 positions Max. tool diameter: 325 mm Ibsdpfjz Nc Eijx Agysc Max. tool length: 450 mm Max. tool weight: 35 Kg Internal coolant supply through the spindle center up to a maximum of 80 bar In addition: - Coolant gravity belt filter by Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 by Renishaw Net machine weight with H/V support approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data subject to change without notice. Errors and prior sale reserved.

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Isdpfx Aoz S S Elogyebc Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: excellent (used), Year of construction: 2016, operating hours: 12,158 h, functionality: fully functional, machine/vehicle number: UT 0871, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 32, 5-axis machining center Ibsdpfx Agoz N Ipusyec

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station Iedoyzh Ulopfx Agyebc - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, Year of construction: 1990, operating hours: 70,042 h, functionality: fully functional, machine/vehicle number: 120035, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,645 mm, total length: 3,560 mm, total width: 2,840 mm, overall weight: 11,000 kg, Equipment: chip conveyor, Control system: 432, software version 700 (4th axis = rotary table) 60-position tool changer (tool length/diameter/weight = 315 mm/125 mm/10 kg) Clamping surface of the CNC rotary table: D1000 x 820 mm Table load capacity: 1000 kg Travel distance, longitudinal (X-axis): 1200 mm Travel distance, transverse (Z-axis): 600 mm Travel distance, vertical (Y-axis): 600 mm Spindle mount: ISO40 Spindle speed, continuously variable in 2 ranges: 20-6300 rpm Feed rates, X, Y, and Z axes: 1-4000 mm/min Rapid traverse, X and Z axes: 12 m/min Rapid traverse, Y axis: 10 m/min Feed rate, rotary table movement (B-axis): 1-1500 °/min Rapid traverse, rotary table movement: 10 rpm Ibodpfxoz Ngqqe Agyoc Spindle drive: 15 kW Total connected load: 40 kVA Weight, approx.: 11000 kg Space requirement, approx. (L x W x H): 3560 x 2840 x 2645 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 2025, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Manufacturer: Fidia Type: K 165 Type: 5-axis machining center Technical data: Year of manufacture: 2005 Table size: 1400 mm x 820 mm X-axis travel: 1000 mm, Y-axis travel: 620 mm, Z-axis travel: 700 mm Control system: Fidia C 1 Maximum table load: 2000 kg Weight: 12,000 kg Currently in operation. I will be publishing detailed technical specifications shortly. Iedpfjz Rmn Ssx Agyjbc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Technical Specification Ijdpez R A Tdofx Agyjbc Taper Size HSK 63

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Ibedpfxjxg Dhcs Agyec Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: ready for operation (used), Year of construction: 1998, Available for immediate pickup at our location: Vertical machining center ZPS Depo Type MCTV 1060 NT Iedpfx Ajz Ixq Ejgyjbc Year of manufacture 1998 Heidenhain iTNC 426 M Table 1270 x 590 mm Travel distances X/Y/Z 1016/610/760 mm SK 50 Spindle speeds up to 8000 rpm Table load max. 900 kg Drive power 11 kW Tool changer, 24 positions Distance spindle – table 80 – 840 mm Weight 6700 kg Price: Euro 4,000.00 plus VAT, pickup at our location.

Condition: good (used), Year of construction: 2025, functionality: fully functional, Sales from the location 97424 Schweinfurt Manufacturer: SPINNER Model: U5-630 Type: CNC machining center Year of construction: 2025 Used, with signs of wear, in good condition Ijdpjz Iz Rhefx Agyjbc Technical data according to the manufacturer: Axes: 5 X-axis: 630 mm Y-axis: 530 mm Z-axis: 465 mm Milling spindle: 20,000 rpm Tool interface: HSK63 Tool magazine: 32 tool stations 2-axis swivel-tilt table D=650 mm in precision design T Rotary table diameter 650 mm Table load: 500 kg Swivel range B=-90° (-50°)/+110° Direct measuring system in B and C axes Hydraulic brake for swivel axis B and rotary axis C Direct measuring systems in X/Y/Z axes HEIDENHAIN control system We will gladly provide further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected after scheduling an appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2000, X 1080mm Ibsdez Sqanspfx Agysc Y 710mm Z 710 mm

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB Ibedpfxszndure Agyjc The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: X: 1520 Y: 520 Z: 420 C: 360 degrees B: -5 degrees (-90 degrees) +115 degrees Equipment: Siemens 840D control with ShopMill Chip conveyor Ibodpfsz Hcahjx Agyoc Blum tool measurement system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle, SK40 Tool changer Swinging operation, 3-axis - 5-axis machining Compressed air for the spindle Enclosed work area Clamping surface 3-axis table: 920 x 540 mm Tilting round table: 650 mm diameter Accessories: Various tool holders, SK40 Machine feet 3D measuring probe Tool measurement system Machine is available immediately! We will handle the loading of the machine! Transport can be organized upon request.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Iedpfjvx N Shox Agysbc Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMF 500 Linear Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS Travel X-Axis: 5.000 mm Y-Axis: 920 mm Z-Axis: 820 mm Panning head: 1°, Hirth Spindle speeds: 20 - 10.000 rpm Tool: SK 50 Toolchanger Tool capacity: 80 Ibodjz Rl N Uopfx Agyec Table size: 2 x 2.700 x 900 (max. 5.610) mm NC rotary table Equipment Caliper: Heidenhain TS 649 Oil mist separator Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Electronical handwheel separating plate

Condition: used, Year of construction: 2002, Control Heidenhain TNC 426 M x-travel 1.350 mm y-travel 1.150 mm z-travel 870 mm Feed ( x / y / z) 0 - 10.000 mm/min NC rotary table 1.100 x 1.000 mm table load capacity 1.500 kg T-slots (number x width x distance) 8 x 18 H12, 1 x 18 H7 x 1 mm spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 20/24 kW torque 191 Nm tool taper HSK-A63 number of tool places 46 Pos. max. tool diameter 80/130 mm max. tool length 300 mm max. tool weight 8 kg Max. magazine capacity 200 kg Condition: used Technical features & accessories: - MTA TAEEVO015 cooling unit - Belt filter - Chip conveyor Accessories, tools, and clamping devices shown are included in the scope of delivery Ibodjz St Syepfx Agyoc only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Ibjdpswlqpyofx Agyec Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 24, number of axes: 6, This 6-axis SAMAG TFZ 2L-1000 was manufactured in 2019. It features a travel extension of 1,600 mm in the X-axis, 1,250 mm in the Y-axis, and 1,100 mm in the Z-axis. The machine is equipped with a reinforced main spindle drive of 15/23 kW and a tool changer with 24 positions. If you are looking to get high-quality deep hole drilling and milling capabilities, consider the SAMAG TFZ 2L-1000 universal machining centre we have for sale. Contact us for further details. Ijdpfx Agoz Nhx Neyjbc - Number of Axes: 6 Axes (Linear X, Y, Z, W axes; A-swivel axis +/- 30°; B-rotary table axis 360°)- Travel Extension Y-axis: 1,250 mm- Main Spindle Drive: Reinforced 15/23 kW (for standard spindle 6,000 rpm)- Drilling Diameter Range: Ø 4 - 36 mm- Tool Changer: 24 positions for HSK-A 63 spindle with cover- Cooling Medium: Emulsion execution with enclosed roof and extraction unit- Measuring System: Direct measuring system in all main axes- Probing Systems: Heidenhain TS 460 touch probe, Heidenhain TT 460 3D infrared touch system, and Ø 25 mm calibration ball- Monitoring & Kinematics: Safety query chip cartridge, collision monitoring with 3D acceleration sensor, DCM (Dynamic Collision Monitoring), and QCK (Quick Check Kinematics) Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2005, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed rate X-axis: 90 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 90 m/min, controller manufacturer: Heidenhain 530i, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 300 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 900 kg, table load: 900 kg, overall weight: 14,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 5-axis portal machining center, primarily used for 95% aluminum machining. The machine can be sold immediately. • Rapid traverse and feed rate: 90 m/min • Acceleration: 9 m/s² • HSK 63A / 18000 rpm • External nozzles / internal coolant system / air / 1000L coolant tank • Chip conveyor, can be inserted from either side • 5 axes simultaneous • 60 tool positions in the tool changer • Blum laser / dial indicator • Brandkamp collision protection system • Indunorm pallet changer, 300 kg capacity • Plans and operating manuals for the machine and all other components • Includes 3 pallets, size 600 x 800 (since 2016) • Spindle overhauled in 2023, see attached document • Pallet transfer with Partool system (since 2016) + pallets • All axes with linear drives Ibjdpfx Agjzbbpzoyoc • Machine serviced annually, wear parts replaced

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2802027, The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 18000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min Ijdpfxsz Szxhj Agyebc total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: OI-MC, table width: 700 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, spindle nose: DIN 40 ISO, number of slots in tool magazine: 24, CNC FANUC – OI-MC TABLE Table dimensions: 1400 x 700 mm T-slot dimensions / pitch: 5-18 x 125 mm Maximum allowable weight: 1000 kg CAPABILITIES: X-axis longitudinal travel: 1200 mm Y-axis transverse travel: 700 mm Z-axis vertical travel: 700 mm SPINDLE: Spindle mount: DIN40 ISO Rotational speed: 10,000 rpm Motor power: 11/15 kW FEEDS: Rapid traverse rate for X, Y, Z axes: 24000 mm/min Complete with: - Rotating table, 4th axis, with LCM HP250 tailstock - 24-position RANDOM-type tool magazine - Variety of collets - Remote electronic handwheel Year of manufacture: 2009 Isdpez H Npcsfx Agyebc

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Isdpfx Agezuw Eqeysbc Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: used, Year of construction: 2009, functionality: fully functional, torque: 12,000 Nm, workpiece length (max.): 5,500 mm, workpiece width (max.): 170 mm, workpiece height (max.): 200 mm, total height: 2,000 mm, total length: 8,000 mm, total width: 1,800 mm, table length: 6,400 mm, overall weight: 1,800 kg, number of slots in tool magazine: 12, type of input current: three-phase, Stroj u urednom stanju, spreman za rad. Ibsdpfxozi Ukas Agyec Za više informacija, kontakt . Hvala.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 11460000643, functionality: fully functional, operating hours: 35,319 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Ibsderkz Tfopfx Agyoc

Condition: good (used), Year of construction: 2010, 5-axis CNC machining center - universal - Manufacturer: CHIRON Machine Model: Mill 2000 Control: Siemens 840D Year of manufacture: 2010 TECHNICAL DATA Travel ranges - X-axis: (mm) 2,000 - Y-axis: (mm) 500 - Z-axis: (mm) 550 Rapid traverse rate: X/Y/Z (mm/min) 60,000 Spindle - Internal coolant supply (ICS): (bar) - Spindle speed max.: (rpm) 12,000 Tool magazine - Tool holder: SK40 - Tool places: 40 Machine table - Size of fixed table L x W: (mm) 2,000 x 550 Number of rotary tables: 2 - Manufacturer: Peiseler - Model: ZAS 160 Number of steady rests: 2 - Manufacturer: Peiseler - Model: GP MK 3 - Actuation: hydraulic EQUIPMENT FEATURES + Siemens 840D control + Partition for alternating machining + Rotary tables, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model ZAS 160 + Steady rests, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model GP MK3 + ICS pump 40.6 bar + Chip conveyor, screw conveyor + Paper band filter + Air blow gun, 2, 1 on the right, 1 on the left + Chip flushing gun, 2, 1 on the right, 1 on the left + Electronic mini handwheel with emergency stop + Air-conditioned control cabinet + Fire extinguishing system + Hydraulic system + Signal light, 3-color Ibodpfx Aoz E Nvgjgyjc Subject to changes and errors in the technical data and information.