Used Sink-Float Tank, Centrifuge, Screen for sale (17,135)

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Table size: 100 x 130 cm Nljdpfjx H Rybjx Anked Electrical inspection required!

Condition: not inspected (used), Manufacturer: STORK capacity: 375m3/h Nljdpfxem Twrzs Ankod motor: 90 kW

Condition: not inspected (used), Manufacturer: Stork Nedpfxsm Uc R Ue Ankjld Capacity: 660 m3/h Engine: 160 kW

Condition: good (used), Filling capacity: 35 kg. Nledpfx Aegl Auxsnked

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm Njdpevwgq Sofx Ankold weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251 – Alfa Laval Clarifier Module, 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Capacity min. 10,000 L/h Nlodpjw Ap I Ajfx Ankod Offering 3 identical units. Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor, 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual. Year of manufacture: 2017.

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, 3 pcs. 2008, 2010, 2021. Njdpfezl Szusx Anksld

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Nlodpfoznl Hijx Anksd Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks

Condition: used, Year of construction: 2002, Overview This Alfa Laval VNPX 510 SFD-34C is a self-cleaning disc-stack separator built in 2002 by Alfa Laval (Tumba, Sweden). The VNPX series is an established solids-ejecting clarifier platform for the food and beverage industry; this unit was last operated in a brewery. The separator is currently disassembled: frame, bowl section, drive motor and fittings are stored as individual components, which makes inspection of the main parts straightforward and simplifies transport. The scope of delivery includes the 22 kW ABB drive motor, a stainless steel sludge collection vessel of approx. 150 l and the Siemens SIMATIC C7-633 control system with a separate touch panel and switch cabinet. Technical data - Manufacturer: Alfa Laval (Tumba, Sweden) - Model: VNPX 510 SFD-34C - Year of manufacture: 2002 - Machine type: self-cleaning disc-stack separator (clarifier) - Max. bowl speed: 6,240 rpm - Motor shaft speed: 1,500 rpm, 50 Hz - Recommended motor power: 22 kW - Max. density of feed: 1,100 kg/m³ - Process temperature: -5 to +100 °C - Control: Siemens SIMATIC C7-633 incl. separate touch panel and switch cabinet Equipment - ABB drive motor, 22 kW (separate) - Stainless steel sludge collection vessel, approx. 150 l - Siemens SIMATIC C7-633 control with touch panel and switch cabinet - Valve and fittings assembly with flow meters and pressure gauge - Operating manual (German) Condition Used. The separator was dismantled for operational reasons and is sold disassembled; the motor is separate. The components were stored outdoors. Availability Nledszpai Ispfx Anksd Immediately. Location: Germany.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Nledpfx Ajzn Rfkenkod Volumetric flow rate: 8.3 m³/min Engine speed: 2,882 rpm

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Nlsdoxbzaljpfx Ankod Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. Njdpexby D Aofx Ankeld High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 270L Vertical Air Receiver + IZBERG N10S Air Dryer This complete set includes the LUFT 1000 INVERTER screw compressor, a 270-liter vertical air receiver with full compressed air accessories, and the IZBERG N10S refrigerated air dryer. Designed for professional use, this system is ideal for industrial plants, workshops, and pneumatic installations that demand high performance, energy efficiency, and reliability. The LUFT series screw compressors by the Polish brand CORMAK incorporate the latest advancements in pneumatic technology, paired with high-quality components and materials. Low operating costs, user-friendly operation, robust construction, and high output ensure efficient and hassle-free performance. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g CORMAK 270L Vertical Air Receiver – Key Features: This 270-liter vertical air tank with an operating pressure of 11 bar is a reliable solution for storing compressed air in industrial environments. It acts as both a buffer tank and a stabilizer for compressor operation. Nledsxazlrjpfx Ankod Professional Pressure Vessel Construction – Made from high-grade, 4 mm thick steel, resistant to both pressure and corrosion. UDT Certification & CE Marking – Compliant with EU safety and quality directives. Operating Pressure of 11 bar – Suitable for most pneumatic systems, including those with higher pressure requirements. High Storage Capacity (270 L) – Ensures steady air supply and reduces compressor cycling frequency. Multi-connection Ports – Equipped with five outlets in 1¼", 2", and ½" sizes for versatile system integration. Durable Finish – Internal and external anti-corrosive coating ensures long service life. Space-Saving Vertical Design – Ideal for facilities where floor space is limited. Ideal for: Manufacturing facilities Automotive and industrial workshops Pneumatic tool and machine operation Compressed air systems requiring stable pressure and high efficiency This comprehensive compressed air solution offers excellent energy efficiency, stable pressure control, and long-term reliability, making it a perfect fit for demanding industrial applications.

Condition: new, Year of construction: 2026, Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air required for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. This model is designed for continuous operation, making it ideal for demanding applications such as tire service centers, smaller automotive workshops, and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter and more stable operation. The LUFT 700 features a direct-drive system, providing significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimal utilization of motor power, resulting in higher performance with lower energy consumption. Nedpfsza Aptex Ankjld The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. The combination of the proven reliability of an induction motor with intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. High-quality CORMAK screw compressors, such as the LUFT 700 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven engineering solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to withstand even the most intensive operating conditions. In CORMAK screw compressors, such as the LUFT 700, a key component ensuring reliability and optimized operation is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 5.5 kW Power supply: 400V / 50Hz Air delivery at 0–6 bar: 690 L/min Air delivery at 6 bar: 650 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 630 L/min Outlet connection (G): 1/2" Dimensions: 1445 × 610 × 1410 mm Weight: 200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in compressor sales have enabled us to develop models that offer an excellent price-to-performance ratio. This model is ideally suited for small workshops and small manufacturing companies. It features high air delivery (380 l/min) relative to its compact dimensions, allowing several devices to operate simultaneously. Its very low noise level (60 dB) makes working in the same room comfortable and unobtrusive. Are you looking for an efficient and reliable compressor for smaller workshops, service points, or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual air delivery of up to 400 l/min, it provides a constant supply of compressed air necessary for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. The LUFT 400 features a reliable and robust direct-drive transmission system, eliminating vibrations and the need for belt drive adjustments. This proven solution ensures stable operation and a long service life by providing direct power transfer from the motor to the screw airend. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving access to key compressor information and increasing operational flexibility and process control. Permanent Magnet Motors (PM Motors) represent an innovative approach to electric drive technology, offering a number of significant advantages over traditional induction motors. An inverter (also known as a variable frequency drive, VFD) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows smooth adjustment of the compressor motor speed according to the current demand for compressed air. High-quality CORMAK screw compressors, such as the LUFT 400 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to meet the demands of even the most intensive operation. In CORMAK screw compressors, such as the LUFT 400, a key element ensuring reliability and work optimization is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 3.0 kW / 4 HP Power supply: 230V / 50Hz Air delivery at 0–6 bar: average 400 L/min Air delivery at 6 bar: 390 L/min Air delivery at 8 bar: 380 L/min Air delivery at 10 bar: 380 L/min Outlet connection (G): 1/2" Dimensions: 1130 × 520 × 1300 mm Njdpfx Asza Al Uonkjld Weight: 170 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Nsdpfeycg Rysx Ankjld Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Nlodpfxerh E Ero Ankjd

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Nledpfxexnyhue Ankjd Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: Nledpfeychbasx Ankod They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. Nlodpfxeycg Ufe Ankjd 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings Nlsdpfx Anjycg I Sekjd 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Nodpfx Ajyguq Aenkjld Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Njdpfeyguirex Anksld Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), Njdpexa Ah Uofx Ankold A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Year of construction: 2021, condition: used, 2 x Dissolved Nitrogen Flotation Tanks Designed for high-efficiency removal of residual oil, hydrocarbons, and suspended solids in industrial wastewater. Operates using pressurised nitrogen microbubble technology to float contaminants for automated removal Please note as the goods are packed the pictures shown are representative and not of actual units Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. BPDD and EUS forms can be downloaded from the website. Njdpfezl U D Esx Anksld