Chip centrifuge Chip processing

Turbo Separator T 18 A

Condition: good (used), 600mm MultiFormer direct from meat-free factory, fitted with optional BridgeBreaker. Other 600mm machines available from same line. Ijdpfxev H D N De Abceap

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Model DAGFS 100 New, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amp. Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank capacity for up to 8 hours of operation at 75% load Fuel consumption at 75% load: approx. 16 liters/h Fuel consumption in standby: approx. 7 liters/h Drive Engine: Diesel inline engine RICARDO type R6105AZD Engine Power at 1500 rpm: 100 kW Iaodpfx Aex Srv Iebcsp Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe forklift handling - 3x CEE 16 Amp sockets (3-pin, 230 Volt) - 1x CEE 32 Amp socket (5-pin, 400 Volt) - Terminal blocks for cable power connection to external consumers, e.g. construction site power distributor - ATS module for mains backup operation, automatic emergency power switchover in case of power failure - 2 starter batteries, 12 Volt, for 24 Volt starter Required space: L x W x H 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new machine from stock

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm Iedpfx Abofc T Tqeceap -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: new, Wet exhaust system - available in steel and stainless steel Ijdpoci Tlrjfx Abcsap - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: used, Year of construction: 2015, Technical details: Ijdpfx Absxc Idmecsap number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. *

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Iaedpfx Abogqr A Dscjp

Condition: good (used), Technical data are shown on pictures. Iedpfxop N Aq Hj Abcjap

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW Iedpfx Aoip Nikjbceap - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. Iajdeh Hd A Sepfx Abcsp With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Iodpfx Aeifnzdebcoap Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)