Used Tbt / Sft Deep Hole Drilling Machine for sale (66,969)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! Itedezkgbyjpfx Aahei TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Itjdpjzmxf Asfx Aahsi Defective – PLC controller missing.

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Without table! Ijdpfx Aaeh Eigbohjti

Condition: good (used), 12-head drilling machine for sale, Table size: 400 x 360 mm Itedpfspy D Dwjx Aahei

Condition: good (used), Outreach: 915 mm Itjdpfx Aod Ixy Isahsi Taper: MK3 Length: 1700 mm Width: 1,000 mm Height: 2000 mm Weight: 1000 kg

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Itedpfxszcmn Eo Aahei Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16 Itedpfx Aozdqttoahei

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes Isdpfx Aaozcmpcshjti

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Isdpfx Aajzd Hntjhsti Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm Itjdpjzmmt Iefx Aahji No of Bottom Units: 8 Lateral horizontal groups: yes

Condition: good (used), Citoborma paper drilling machine, 4 spindles, height-adjustable table, in good condition, immediately available. Isdpfx Ajxbzfnsaheti If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Itodpfjx U Ectsx Aahsi Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Isdpfxsulz Iwe Aahoti

Condition: like new (used), Year of construction: 2022, functionality: fully functional, hinge drilling and insertion machine Itjdpfxjzk Tpws Aahji

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Ijdpsh Ek H Sjfx Aahjti Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Table dimensions: 745 x 460 mm Itjdpfxsvwkw As Aahji Machine can be viewed under power

Condition: good (used), Year of construction: 1989, bore capacity in steel (diameter) 30 mm throat 300 mm bore stroke 150 mm Iodpfxjzmix Ho Aahsti cross-moving table 600 x 180 total power requirement 1,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 2,2 m

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Itodpfex Dcfhjx Aahoi Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Speed: 68 - 1,270 RPM Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Machine dimensions: 1,000 x 700 x 2,400 mm

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Number of spindles: 35 Iedpfx Aaezh U Hlsheti Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min Itjdpezmixmofx Aahoi weight of the machine ca. 1,1 t

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Iodpfx Aoyqxxrsahjti Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Ijdpfx Aaoy Nkyaohjti No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Isdsyhbhwjpfx Aahoti Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Positioning of Units by NC: yes Isdpfey Nkmmox Aahoti Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm Ijdjwimzyopfx Aahoti Max. panel length: 800 mm No of Bottom Units: 5 Lateral horizontal groups: yes