Used Tbt Te 30-1000 So for sale (46,315)

Condition: used, diameter / mm boring diameter / mm - / total power requirement / kW Bwjdpjyk Ilnjfx Apaon weight of the machine ca. / t required space / m dividing head Chuck DH 130 x 4 II / TGL 30 2332 Exact dimensions available upon request.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Bedpfx Aoudxchepaewn Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Bedpfx Apjud A Hkoajwn Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: used, mileage: 1,66,762 km, power: 80 kW (108.77 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 03/2026, color: grey, gearing type: mechanical, emission class: euro5, Vehicle No.: 016-26 Bsdsyfi Uyjpfx Apaswn Volkswagen Crafter 2.0 16V TDI Frame for Glass Transport First registration: Jan. 2012 * Wheelbase: 3,665 mm * Euro 5 EEV * TÜV valid until 03/2026 Shelves: Luggage net on rear wing door, plastic flooring in the load/passenger compartment, wooden flooring in the cargo area, Suspension Package A, rear wing doors with glazing, cabin seats: adjustable passenger seat Additional equipment: Storage trays: shallow tray/compartment above windscreen, driver’s airbag, traction control (ASR), entry grab handle at rear right pillar, driver assistance system: brake assist (HBA), body/superstructure: standard van, body variant: standard roof, fuel tank: 75 liters, high partition wall in the cargo area without window, model update, engine 2.0 L - 80 kW TDI, parking light control, wheelbase 3665 mm, tire repair kit, low emission according to Euro 5 standard, right side sliding door in load/passenger compartment, seat upholstery/interior: fabric, cabin seats: driver’s seat height adjustable, perm. total weight 3.00 t, additional brake light Viewing during our opening hours is possible at any time, test drive by appointment! For export sales, a deposit will be retained, which will be refunded upon receipt of the confirmation of arrival. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No warranty is given for the function of extras. All information is provided without guarantee - subject to errors, changes, typographical errors, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our general terms and conditions and ensure you have read them.

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 Bedpfxsvwm A Ie Apaewn - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: good (used), Year of construction: 2007, Teupen Leo 30T Crawler Boom Lift / Crawler Telescopic Boom Lift, 30-meter working height, 2007 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Bwsdpozbt Dwofx Apasn 5391 LR Nuland

Condition: excellent (used), mileage: 1,03,000 km, power: 184 kW (250.17 HP), first registration: 01/2003, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 10,000 mm, total width: 2,350 mm, total height: 3,300 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 9,800 kg, permissible axle load (axle 3): 5,600 kg, Year of construction: 2003, Equipment: ABS, EBS, central locking, differential lock, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Brake booster - Differential lock - Air suspension - Air horn - Radio/cassette player - Rotating beacon - Disc brakes - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication system = Notes = Metz 30 meter Generator 6 kVA, 4138 operating hours = Additional Information = Axle configuration Front axle: Max. axle load: 5600 kg; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Max. axle load: 9800 kg; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Max. axle load: 5600 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Weights Unladen weight: 14,820 kg Payload: 6,180 kg GVWR: 21,000 kg Functional Mast length: 30 m CE marking: yes Bwedpezbuuqefx Apaen Condition Technical condition: very good Optical condition: very good Further Information Please contact Andre, Henri, or Andre for further information.

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: IST, rotary encoder -Type: BG-30-W-04-PP-00100-0-3-24-V009 -Voltage: 5-24 V -Shaft: Ø 4 x 10 mm -Number: 3x encoders available -Price per piece -Dimensions: 90/90/H60 mm Bwjdsy Spb Uepfx Apajn -Weight: 0.1 kg/piece

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) Bwedpey Spcljfx Apajn OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors Bwjdpfx Apoy Sathjajn - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Bwjdpfx Apevut Hnoaen Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Bwjdpjvut H Uofx Apajn Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 overhaul 2003 with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/90/H75 mm -Total weight: 4.4 kg Bodpfx Aey R Spxjpaswn

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg Bsdpjy R Sm Rsfx Apaown

Condition: used, mileage: 71,480 km, power: 167 kW (227.06 HP), first registration: 08/2002, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, empty load weight: 12,180 kg, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2002, operating hours: 2,161 h, Equipment: differential lock, hydraulics, low noise, Fire Brigade – Turntable Ladder Vehicle: - Iveco - Eurocargo 130 E 24 - First registered: 08/01/2002 - 6-cylinder Iveco diesel engine, 5681ccm; 227 hp - 71,480 km; 6,864 engine hours - Differential lock - Auxiliary drive - 6-speed manual transmission - 3 seats - External power supply 220V - Siren / flashing lights - 989cm x 235cm x 335cm (l x w x h) - Unladen weight: 12,180 kg; permissible total weight: 13,000 kg Turntable ladder superstructure: WARNING: TURNTABLE LADDER SUPERSTRUCTURE CURRENTLY NOT FUNCTIONAL – ELECTRICAL MALFUNCTION! - Camiva / Metz - EPAS 30M Iveco - 33m height - 2,161 operating hours - Hydraulic outriggers Bodpfeqxt Nuox Apaewn - Basket in lying position, max. 3 people, 270 kg - Stand-alone and basket controls - Storage compartments + equipment holders A video of this offer can be found at: You can find our entire vehicle inventory at: Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Professional vacuum tumbler with 1000 liter capacity by Sind is designed for marinating, tenderizing and uniform mixing of meat in meat processing plants, production facilities, restaurants and professional kitchens. The vacuum system improves marinade absorption, speeds up processing and enhances texture, flavor and final product quality. The machine is made of high-quality stainless steel, ensuring long service life, high hygiene standards and resistance to intensive professional use. Variable speed control and stable performance allow adaptation to different products and processing requirements. Technical specifications: Machine type: Vacuum tumbler Manufacturer: Sind Capacity: 1000 liters Material: Stainless steel Application: Marinating, mixing and tenderizing meat Bwedey Enm Njpfx Apaon Working system: Vacuum Speed control: Yes Use: Meat industry, meat processing, restaurants, professional kitchens Operation: Stable, efficient and reliable Maintenance: Easy and simple

Condition: excellent (used), mileage: 5,77,391 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2017, operating hours: 4,937 h, Equipment: retarder, = Additional options and accessories = - Intarder - PTO = Remarks = YV2XT40B8HA803276 = More information = Bwodpfozathyox Apasn Empty weight: 16.600 kg Crane: HMF 4020 K5 Make of bodywork: HMF 4020 Technical condition: very good Visual appearance: very good Registration number: EL160QM = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 5,77,391 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2017, operating hours: 4,937 h, Equipment: crane, retarder, = Additional options and accessories = - Intarder - PTO = Remarks = YV2XT40B8HA803276 = More information = Empty weight: 16.600 kg Crane: HMF 4020 K5 Make of bodywork: HMF 4020 Technical condition: very good Visual appearance: very good Registration number: EL160QM = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Bedpsymp Txjfx Apaswn Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,573 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,444 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Bwsdpfx Apoy Uz Tboaon Transmission: Hydrostatic / single-pedal version Condition: Refurbished, no warranty Technical condition: good Front tyres type: Superelastic Front tyres size: 27x10-12 NEW Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 23x9-10 NEW Rear tyres condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection book. For further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Please visit our homepage at fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as delivery under favourable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The listed operating hours were recorded as of the listing date. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Durwen fork positioner with separate sideshift 3rd valve, 4th valve, rear work light, front work light, half cabin, solenoid valve, diesel particulate filter, air conditioning, full free lift, safety light, seat heating, Partial cab with door on the right, super comfort air-suspended seat, seat heating.

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min Bwsdpfxsr U Skho Apaen transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: used, Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm Bwjdpfx Apek Abrneasn roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Bwodpfxjk Ablwj Apasn Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Heidenhain TE 425D control panel ID: 315 468-02 SN: 8930570, used, with minor signs of wear, 100% functional, scope of delivery as per photos. Bwedsy Nqt Tepfx Apajn

Condition: ready for operation (used), Heidenhain TE 420 313 038-12 TNC - control panel without rotary switch, used, in good condition, 100% functional, delivery as per photos Bedoy Nqt Hjpfx Apajwn

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO SN:L113063970025005, used, minor signs of wear, 100% functional, scope of delivery as per photos Bwjdpfx Apsi D I D Njaon