Used Unbekannt 4-Column Punching Tool for sale (83,633)

Condition: used, daylight 645 mm centre height 620 mm loading area 700 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,2 x 0,4 m Pjdpfx Aezxt Ngolwsrb

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm Predjin Et Nspfx Alwjb retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS Pjdpfxex U Eiao Alwjrb - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: ready for operation (used), Spindle with Röhm OVS 130 552-493 full-stroke cylinder for Monforts RNC 600E machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Prsdpoz Ac E Sofx Alwsb

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring Prodpfxozp Ex Us Alwob - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Prodjxbh N Hepfx Alweb Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch Predjcwn Ezspfx Alweb -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm Pedpfx Ajcwdmgolwsrb -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Prodpszniqrjfx Alweb -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Prsdpfx Aley T Ik Rjwob Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Punching tool with Linar-integrated punching brackets, ABS-SCHWABE Type 100/160 11 punching brackets, punching unit for a press brake Podpfx Asdz Sp Holwjrb Year of manufacture: approx. 1990 Outreach: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with the punching tool) A round hole tool, ø 5 mm, is installed. Punching bracket spacing: 195 mm - The tool unit was mounted on a hydraulic press brake. Dimensions of the punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of the punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensions L x W x H: 2500 x 345 x 300 Weight: 400 kg Good condition

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder Podpezniqxjfx Alwerb -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post -Quick-change tool holder: 4-way quick-change boring bar holder -Recording dimensions: see photos -Clamping height: 59/34 mm Pedpfowvpvgex Alwsrb -Clamping length: 200 mm -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Condition: used, Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm Prjdocwn Hfepfx Alwob -Weight: 10.6 kg

Condition: ready for operation (used), Control panel circuit board NMT01 44216-720.01 for lid milling machine Pjdpfxjy Suvdo Alworb Condition: Ready for use / functional

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation Prsdpfx Alsx Nng Dswob -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Condition: used, Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool Pjdpfx Ascwn E Iolwjrb -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg

Condition: used, Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square Prodpfocwn E Djx Alwjb -Dimensions: 115/115/H115 mm -Weight: 3.4 kg

Condition: ready for operation (used), Tool changer for Brother TC-225 machine with 5GN9K / 5RK40GN-CT motor - 1300/1550 rpm / 40W / 200V / 50/60Hz, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Pjdpfxsz Ddube Alwerb

Condition: used, Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm Prodpecwn Exofx Alwob -Weight: 50 kg

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t Prodpszcwr Isfx Alwjb space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: good (used), Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm Pjdpfxjhc Uxds Alwsrb -Weight: 4.2 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm Psdpex Nnnbsfx Alworb -Weight: 8.4 kg

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm weight of the machine ca.: 5,9 t Podpfey Rru Ijx Alworb transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots ·Heavy-duty design for machine setup, fixture construction and precision machining ·Ideal for milling, drilling and assembly applications *

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm Prjdpfx Aed Sf U Uslwsb -Weight: 5.3 kg